PROJECT RECORD DOCUMENTS. A. Submit documents under provisions of Section 01700, Contract Closeout.
PROJECT RECORD DOCUMENTS. A. During the progress of the Work maintain a set of drawings at the Project Site for preparing record drawings. Neatly record all changes in the Work and record specific locations of work shown schematically on the drawings. In addition, record the following on mechanical and electrical drawings:
PROJECT RECORD DOCUMENTS. 7.4.4.1 The ESCO shall provide one complete set of all ECM submittals, all Project Documents, any modifications to this Agreement, field test records, all schedules, and correspondence to the University as such documents are generated or disseminated.
PROJECT RECORD DOCUMENTS. 2.10.1. CM@Risk understands and agrees that during the construction period, it shall maintain at the jobsite a set of blueline or blackline prints of the Construction Document drawings and shop drawings for Project Record Document purposes. Said Construction Document drawings shall be updated and made available to City for verification on a monthly basis from the date of first submission.
PROJECT RECORD DOCUMENTS. A. General: Do not use Project Record Documents for construction purposes. Protect Project Record Documents from deterioration and loss. Provide access to Project Record Documents for Engineer's reference during normal working hours.
PROJECT RECORD DOCUMENTS. As‐built data accurately portrayed in the BIM model for future reference and reuse.
PROJECT RECORD DOCUMENTS. The Contractor shall maintain at the job site one copy of all contract and project documents, each portion of which shall be clearly marked "Project Record Copy". These documents, including drawings, specifications, addenda, approved shop drawings, change orders, field orders, other contract modifications, and other approved documents submitted by the Contractor in compliance with various sections of the Contract Documents, shall be maintained in good condition, available at all times for inspection by the City, and not used for construction purposes. The Contractor shall mark up the most appropriate document to show significant changes made during construction progress, significant detail not shown in the original Contract Documents, and the information shall include, but not be limited to, location of underground utilities and appurtenances referenced to permanent surface improvements, and location of internal utilities and appurtenances concealed in building structures referenced to visible and accessible features of structures. The Contractor shall keep the project record documents current and not permanently conceal any work until required information has been recorded. Upon completion of the project and prior to final acceptance, the Contractor shall submit the marked up set of project record documents to the Engineer for the City along with the “Contractor’s Certificate of Completion” found in Part IV of the bidding documents. After the Engineer has inspected the work and has determined it to be substantially complete, the City will initiate a “Certificate of Substantial Completion,” which will establish the date of commencement of the warranty period.
PROJECT RECORD DOCUMENTS. 2.19.1 During the construction period, the Design-Builder shall maintain at the Site a set of blueline or blackline prints of the Construction Drawings and Shop Drawings for Project Record Document purposes.
PROJECT RECORD DOCUMENTS. 11.1 During the construction period, CM@R shall maintain at the jobsite a full-size set of prints of the Drawings and Shop Drawings, indicating the actual installation, where the installation varies from the original Construction Documents (the “Project Record Drawings”). CM@R will give particular attention to information on elements that will be concealed, which would be difficult to identify or measure and record later. items required to be marked include but are not limited to:
PROJECT RECORD DOCUMENTS. The Architect shall require the Contractor to maintain on the construction site one complete set of contract record documents amended by “red line” inclusion. The “red line” plans shall show all major adjustments to the contract drawings including adjustments to buried cable, conduits, pipe, fuel tanks, storm and sewage systems, and modifications to all architectural, structural, mechanical and electrical systems for the existing and new Terminal buildings. The utilities shall be witnessed by dimension. In general, the record drawings and specifications must be marked up to show actual installation where installation varies from that originally shown. The Architect shall make the corrections to the electronic files and specification documents, and after Owner review and approval, provide the Owner with one full and one reduced size paper copy of the drawings, as well as, one set of electronic disks including PDF and AutoCAD formats, of the record drawings. The Architect must not transfer or assign the task of making the revisions to the record drawings to the Contractor. The Architect shall note in the title block that each sheet is a record drawing. The Architect’s record document title block shall not be altered in any way from the original contract drawings.
