PROHIBITED WASTE DISPOSAL AREAS. Purchaser shall not deposit waste material in the following areas: Within 50 feet of a cross drain culvert. Within 100 feet of a live stream or wetland. Within a riparian management zone. On side slopes steeper than 45%. In locations that interfere with the construction of the road prism. In locations that impede drainage. Within the operational area for cable landings. Against standing timber. Outside the clearing limits.
PROHIBITED WASTE DISPOSAL AREAS. Purchaser shall not deposit waste material in the following areas, except as otherwise specified in this plan: Within 50 feet of a cross drain culvert. Within 100 feet of a live stream or wetland. In locations that interfere with the construction of the road prism. In locations that impede drainage. Against standing timber. Outside the clearing limits. 4-55 ROAD SHAPING Purchaser shall shape the subgrade and surface as shown on the TYPICAL SECTION SHEET. The subgrade and surface shape must ensure runoff in an even, un-concentrated manner, and must be uniform, firm, and rut-free.
PROHIBITED WASTE DISPOSAL AREAS. Purchaser shall not deposit waste material in the following areas, except as otherwise specified in this plan: ▪ Within 50 feet of a cross drain culvert. ▪ Within 100 feet of a live stream or wetland. ▪ Within a riparian management zone. ▪ Within a wetland management zone. ▪ On side slopes steeper than 45%. ▪ In locations that interfere with the construction of the road prism. ▪ In locations that impede drainage. ▪ Within the operational area for cable landings. ▪ Against standing timber.
PROHIBITED WASTE DISPOSAL AREAS. Purchaser shall not deposit waste material in the following areas, except as otherwise specified in this plan: Within 50 feet of a cross drain culvert. Within 100 feet of a live stream or wetland. Within a riparian management zone. Within a wetland management zone. On side slopes steeper than 45%. In locations that interfere with the construction of the road prism. In locations that impede drainage. Within the operational area for cable landings. Against standing timber. Outside the clearing limits. On the uphill side of the road.
PROHIBITED WASTE DISPOSAL AREAS. Waste material shall not be deposited in the following areas: • Within 5 feet of a cross drain culvert. • Within 50 feet of a live stream or wetland. • Within a riparian management zone. • On side slopes steeper than 45%. • In locations that interfere with the construction of the road prism. • In locations that impede drainage. • Within the operational area for cable landings. • Against standing timber.
PROHIBITED WASTE DISPOSAL AREAS. Purchaser shall not deposit waste material in the following areas, except as otherwise specified in this plan: Within 50 feet of a cross drain culvert. Within 100 feet of a live stream or wetland. On side slopes steeper than 45%. In locations that interfere with the construction of the road prism. In locations that impede drainage. Within the operational area for cable landings. Against standing timber. SUBSECTION SHAPING 4-55 ROAD SHAPING Purchaser shall shape each lift of the subgrade and surface as shown on the TYPICAL SECTION SHEET. The subgrade and surface shape must ensure runoff in an even, un- concentrated manner, and must be uniform, firm, and rut-free.
PROHIBITED WASTE DISPOSAL AREAS. Purchaser shall not deposit waste material in the following areas, except as otherwise specified in this plan: Within 50 feet of a cross drain culvert. Within 100 feet of a live stream or wetland. Within a riparian management zone. On side slopes steeper than 35%. In locations that interfere with the construction of the road prism. In locations that impede drainage. Against standing timber. Outside the clearing limits. 4-55 ROAD SHAPING Purchaser shall shape the subgrade and surface as shown on the TYPICAL SECTION SHEET. The subgrade and surface shape must ensure runoff in an even, un-concentrated manner, and must be uniform, firm, and rut-free. Purchaser shall accomplish all shaping using a motor grader with a minimum of 175 horsepower.
PROHIBITED WASTE DISPOSAL AREAS. Waste material shall not be deposited in the following areas , except as otherwise specified in this plan: Within 50 feet of a cross drain culvert. Within 100 feet of a live stream or wetland. Within a riparian management zone. On side slopes steeper than 35%. In locations that interfere with the construction of the road prism. In locations that impede drainage. Against standing timber. Outside the clearing limits. Waste Disposal areas are subject to written approval from the contract administrator.
PROHIBITED WASTE DISPOSAL AREAS. Purchaser shall not deposit waste material in the following areas, except as otherwise specified in this plan: Within 50 feet of a cross drain culvert. Within 100 feet of a live stream or wetland. Within a riparian management zone. Within a wetland management zone. On side slopes steeper than 35%. In locations that interfere with the construction of the road prism. In locations that impede drainage. Against standing timber. Outside the clearing limits 0-00 XXXXXX XXXXXXXX Xxxxxx material may not contain more than 5% clay, organic debris, or trash by volume. Borrow material must be free of rocks greater than 6 inches in any dimension.
PROHIBITED WASTE DISPOSAL AREAS. Unless otherwise specified herein, Purchaser shall not deposit waste material in the following areas: ▪ Within 50 feet of a cross drain culvert. ▪ Within 100 feet of a live stream or wetland. ▪ Within a riparian management zone. ▪ Within a wetland management zone. ▪ On side slopes steeper than 45%. ▪ In locations that interfere with the construction of the road prism. ▪ In locations that impede drainage. ▪ Within the operational area for landings. ▪ Against standing timber. 4-48 NATIVE MATERIAL Native material consists of naturally occurring material that is free of organic debris and trash.
