PRE-DELIVERY INSPECTION. At the discretion of the Authorized User, the Contractor may be required to present a School Bus for pre-delivery inspection. The terms and conditions of such inspection(s) shall be provided by the Authorized User, and should be agreed upon by the Contractor and Authorized User prior to scheduling production. This inspection shall take place inside a building and on a dry School Bus at the OEM’s facility or Contractor’s place of business, as agreed to by the Authorized User. When so required, the Contractor shall make no delivery of a School Bus without written approval of the Authorized User. The Contractor shall notify the Authorized User that the School Bus is ready for inspection. Within five (5) Business Days of the Contractor’s notification, the Authorized User shall send a team of qualified inspectors to the Contractor's facility, or another mutually agreed upon location convenient to the Authorized User, to accomplish the inspection of the School Bus before delivery. Upon the inspector’s arrival at the facility, the Contractor shall assign a mechanic, a runner and a delivery bay to the inspector. It is the Contractor's responsibility to properly itemize, organize and segregate all School Buses. The above areas of responsibility must be accomplished in order to facilitate an expeditious and orderly inspection flow. This shall also allow discrepancies to be corrected while the inspector is located at the Contractor's facility. Inspected School Buses which do not comply with these or other requirements shall be rejected (see also Appendix B §36 Rejected Product). All rejected School Buses shall be corrected at the expense of the Contractor, and the corrected School Buses shall be presented for re-inspection within ten (10) Business Days from notification of the rejection. The Authorized User may cancel the Purchase Order if the Contractor fails to correct any problem, without incurring any cost or fee.
PRE-DELIVERY INSPECTION. 6.1 If this LTA-G or any Purchase Order provides that the Goods generally, or the Goods to be supplied under that Purchase Order (as the case may be), are to subject to pre-delivery inspection, then the following provisions will apply:
PRE-DELIVERY INSPECTION. The successful bidder shall conduct pre-delivery inspection of buses and remove all mechanical, electrical, and physical defects, if any, before delivery of the buses to the Embassy of India. The bidder shall submit the internal Inspection Report of the company along with the supplies before claiming the payment.
PRE-DELIVERY INSPECTION. Either 4.1 or 4.2 shall apply, as specified in Part I, point 14 of the Purchase Agreement.
PRE-DELIVERY INSPECTION. All equipment must be delivered with a Pre-Delivery Inspection (PDI) check list indicating that all predelivery checks have been performed; that all equipment, gauges, etc., are in operational order and ready for immediate use by the Purchasing Entity. The Contractor must perform their own PDI per the manufacturer’s instructions, or to subcontract the PDI. Contractor must also ensure, prior to delivery that all fluids at maximum levels, tire pressures to be at factory recommended levels, lights and switches in working order, etc. Any equipment delivered without the PDI checklist will not be accepted.
PRE-DELIVERY INSPECTION. Seller shall be responsible for the quality control of the Goods it supplies to Tesla pursuant to the Contract, including, without limitation, adequate inspection and testing of Goods prior to delivery.
PRE-DELIVERY INSPECTION. All equipment must be delivered having had the proper inspection and maintenance checks including verifying that all equipment, gauges, etc., are in operational order and ready for immediate use by the Purchasing Entity. The Contractor must perform their own inspections per the manufacturer’s instructions, or to subcontract the inspections. Contractor must also ensure, prior to delivery that all fluids at maximum levels, tire pressures to be at factory recommended levels, lights and switches in working order, etc. Any equipment delivered without having had proper inspections and completed maintenance will not be accepted.
PRE-DELIVERY INSPECTION. Inspection by Contractor upon AABS’ Substantial Completion of the manufacture of the Modular Units prior to Delivery.
PRE-DELIVERY INSPECTION. The following is an additional condition to the obligation of the Purchaser to acquire each Aircraft: Seller shall make the Aircraft (including the Aircraft Documents for such Aircraft) available to Purchaser in lots of four at the Expected Delivery Location to enable Purchaser to conduct a ground inspection of such Aircraft and an inspection of the Aircraft Documents for such Aircraft (collectively, the "Pre-Delivery Inspection"). Subject to Clause 3.8, the Pre-Delivery Inspection for such Aircraft and such Aircraft Documents shall occur during a period of 15 days, commencing on the date that Seller notifies Purchaser that such Aircraft and such Aircraft Documents are available for the Pre-Delivery Inspection at the Expected Delivery Location and such Aircraft and such Aircraft Documents are in fact available to Purchaser (the "Inspection Period"). The Pre-Delivery Inspection will be conducted at Purchaser's expense, and shall include a power assurance run of the Engines and auxiliary power unit of each Aircraft. During the Pre-Delivery Inspection for such Aircraft, Purchaser shall have the right to determine if (a) the condition of such Aircraft is consistent in all material respects with the description of the Aircraft in the Aircraft Specification Summary and (b) the Aircraft Documents for such Aircraft include all of the documents listed and described in the Standard Document List (the "Inspection Conditions"). If such Aircraft and Aircraft Documents comply with the Inspection Conditions, Purchaser shall within two (2) Business Days following completion of the Inspection Period for such Aircraft notify Seller in writing whether any or all such Aircraft are approved for purchase ("Written Approval"). If Purchaser has reasonably determined that any such Aircraft or Aircraft Documents are not in compliance with the Inspection Conditions, Purchaser shall within two (2) Business Days following completion of the Inspection Period for such Aircraft notify Seller in writing and describe in reasonable detail why Purchaser has determined that such Aircraft or Aircraft Documents are not in compliance with the Inspection Conditions (a "Rejection Notice"), but Seller and Purchaser shall proceed with the sale and purchase of the Aircraft for which Purchaser has provided a Written Approval to Seller in accordance with the provisions of this Agreement. If Purchaser has provided Seller with a Rejection Notice with respect to an Aircraft, Seller may, at its option, wit...
PRE-DELIVERY INSPECTION. 6.1 Subject to satisfactory completion of Purchaser's pre-delivery inspection of the Aircraft in accordance with Section 3.6A(b), Purchaser shall execute and deliver to Seller on the Delivery Date an Acceptance Certificate in respect: of the Aircraft, which shall be conclusive evidence (as between Purchaser and Seller) of the matters therein stated.
