POWDER COATING Sample Clauses

POWDER COATING. As an alternate, the finish may be a powder coating for exterior components. The powder shall be Full Gloss Super TGIC Polyester Acrylic. The finish shall withstand salt water spray, exhaust emissions, sunlight UV and acid rain. To meet the above requirements as set by EPA and OSHA, the following ASTM standards apply: Gloss @ 60 Standard 90+/- ASTM D523 Hardness 2H - 3H ASTM D3363 Flexibility ½ inch ASTM D2794 Impact Up to 160 in-lbs., depending on color ASTM D2794 Salt spray Less than 1/16” creepage. 2,500 hrs B1000 Iron phosphate steel ASTM B1117 3,500 hrs zinc phosphate steel ASTM B1117 800 hrs Alodine Aluminum ASTM B1117 Exposure White - 60 months, less than 50% gloss loss. Bronze - 60 months, less than 50% gloss loss. The pole shall be painted to height of seven (7) feet.
Sample 1Sample 2See All (6)
AutoNDA by SimpleDocs
POWDER COATING. As an alternate, the finish may be a powder coating for exterior components. The powder shall be Full Gloss Super
Sample 1Sample 2Sample 3
POWDER COATING. Powder coating shall be carried out using pure Polyester powder with proper and appropriate pre- treatment to a thickness of not less than 60 – 80 Microns, measured on all significant surfaces.
Sample 1Sample 2
POWDER COATING. Gloss @ 60□ Hardness Flexibility Standard 90+/- 2H - 3H ½ inch ASTM D523 XXXXX0000 ASTM D2794 Impact Up to 160 in-lbs., depending on color ASTM D2794 Salt spray Less than 1/16” creepage 2,500 hrs B1000 Iron phosphate steel ASTM B1117 3,500 hrs zinc phosphate steel ASTMB1117 800 hrs Alodine Aluminum ASTM B1117 Exposure White - 60 months, less than 50% gloss loss. Bronze - 60 months, less than 50% gloss loss.
Sample 1Sample 2
POWDER COATING. As an alternate, the finish may be a powder coating for exterior components. The powder shall be Full Gloss Super TGIC Gloss @ 60□ Hardness Flexibility Standard 90+/- 2H - 3H ½ inch ASTM D523 XXXXX0000 ASTM D2794 Impact Up to 160 in-lbs., depending on color ASTM D2794 Salt spray Less than 1/16” creepage 2,500 hrs B1000 Iron phosphate steel ASTM B1117 3,500 hrs zinc phosphate steel ASTMB1117 800 hrs Alodine Aluminum ASTM B1117 Exposure White - 60 months, less than 50% gloss loss. Bronze - 60 months, less than 50% gloss loss.
Sample 1
POWDER COATING. Figure 1 – Map of Counties in Utah
Sample 1

Related to POWDER COATING

  • FABRICATION Making up data or results and recording or reporting them.

  • Welding Welding and use of cutting torches or cutoff saws will be permitted only in areas that have been cleared or are free of all material capable of carrying fire. Flammable debris and vegetation must be removed from within a minimum 10-foot radius of all welding and cutting operations. A shovel and a 5-gallon standard backpack water container filled and with handpump attached shall be immediately available for use in the event of a fire start. C8.212 – MARKET-RELATED CONTRACT TERM ADDITION (11/08). The term of this contract may be adjusted when a drastic reduction in wood product prices has occurred in accordance with 36 CFR 223.52. The Producer Price Index used to determine when a drastic reduction in price has occurred is stated in A20. Purchaser will be notified whenever the Chief determines that a drastic reduction in wood product prices has occurred. If the drastic reduction criteria specified in 36 CFR 223.52 are met for 2 consecutive calendar quarters, after contract award date, Contracting Officer will add 1 year to the contract term, upon Purchaser’s written request. For each additional consecutive quarter such a drastic reduction occurs, Contracting Officer will, upon written request, add an additional 3 months to the term during Normal Operating Season, except that no single 3-month addition shall extend the term of the contract by more than one year. Contracting Officer must receive Purchaser’s written request for a market-related contract term addition before the expiration of this contract. No more than 3 years shall be added to a contract's term by market-related contract term addition unless the following conditions are met:

  • Shoes All uniformed staff shall be provided with 2 pairs of shoes annually, replaceable on a normal wear and tear basis.

  • Cement Cement to be used for the work shall comply the following and shall be used with the prior approval of Engineer -in -charge

  • Rubric The rubrics are a scoring tool used for the Educator’s self-assessment, the formative assessment, the formative evaluation and the summative evaluation. The districts may use either the rubrics provided by ESE or comparably rigorous and comprehensive rubrics developed or adopted by the district and reviewed by ESE.

  • VOETSTOOTS The PROPERTY is sold:

  • Prosthetics Crowns and Bridges (Plan B) paying for 60% of the approved Schedule of Fees.

  • Fertilizer Purchaser shall evenly spread the fertilizer listed below on all exposed soil inside the grubbing limits at a rate of 200 pounds per acre of exposed soil. Fertilizer must meet the following specifications: Chemical Component % by Weight Sulphur 3 Inerts 49 SECTION 9 – POST-HAUL ROAD WORK 9-3 CULVERT MATERIAL REMOVED FROM STATE LAND Culverts removed from roads become the property of the Purchaser and must be removed from state land.

  • Footwear Where an employee is required by the College or by legislation, in order to perform his/her duties, to acquire and wear protective footwear, the employee shall provide the College with proof of purchase by March 1 each year and the College shall reimburse such employee, on the first pay day in April in each year, up to a maximum of one hundred and fifty dollar ($150.00). In situations other than the foregoing, the College may, in its discretion, (which discretion shall not be unreasonably exercised) reimburse such expense where it is recommended by the health and safety committee constituted under the Occupational Health and Safety Act.

  • Television Equipment Recycling If this Contract is for the purchase or lease of covered television equipment, then Contractor certifies that it is compliance with Subchapter Z, Chapter 361 of the Texas Health and Safety Code related to the Television Equipment Recycling Program.

Time is Money Join Law Insider Premium to draft better contracts faster.