Physical layer Sample Clauses

Physical layer. The physical layer of the Internet FWA air interface uses digital time division multiplex/time division multiple access (TDM/TDMA) with a 10-slot frame structure. Uplink and downlink carriers are paired, and separated by a fixed duplex spacing of 99.84MHz. A TDM/TDMA channel (i.e. one time-slot one on one RF carrier) is known as a physical channel. In the maximum configuration, one ITS provides 18 pairs of RF carriers, and 180 physical channels. The uplink carriers are contained within the frequency band 3425 MHz to 3450 MHz, and the downlink carriers are contained within the frequency band 3525 MHz to 3550 MHz. The modulation scheme for both the uplink and downlink direction is pi/4 shifted differential quadrature phase shift keying ((pi)/4DQPSK) with a nominal symbol rate of [ * ] symbols/s. The gross data rate is [ * ] kbits/s per carrier.
Sample 1Sample 2Sample 3See All (7)
AutoNDA by SimpleDocs
Physical layer. 6 2.2.1 System Gain Calculation................................................7 2.2.2 Range and Availability for 26GHz ETSI..................................7 2.2.3 Range and Availability for 10GHz ETSI..................................8 3
Sample 1Sample 2
Physical layer. The specifications for the physical layer of the air interface are given in Table 2-3 TABLE 2-3: PHYSICAL LAYER SPECIFICATIONS PARAMETER VALUE --------- ----- Spectral Shape [***] Symbol Rate [***] Mbaud (7 MHz Channel) [***] Mbaud (14 MHz Channel) Modulation 4 QAM Raw Bit Rate: [***] Mbps (7 MHz) [***] Mbps (14 MHz) C/N for [***] BER [***] dB, Typical [***] CONFIDENTIAL TREATMENT REQUESTED
Sample 1Sample 2
Physical layer. The first layer of the seven-layer International Standards Organization (ISO) Open Systems Interconnect (OSI) reference model. This provides the mechanical, electrical, functional and procedural characteristics required to gain access to the transmission medium (e.g., cable) and is responsible for transporting binary information between computerized systems.
Sample 1
Physical layer. The specifications for the physical layer of the air interface are given in Table 2-3 TABLE 2-3: PHYSICAL LAYER SPECIFICATIONS [***] [***] CONFIDENTIAL TREATMENT REQUESTED -10- 30 SYSTEM FUNCTIONAL SPECIFICATION FOR AIRSTAR NETRX --------------------------------------------------------------------------------
Sample 1

Related to Physical layer

  • Physical Examination The Employer, at its own expense, shall have the right and be given the opportunity to have a medical doctor appointed by the Employer examine, as often as it may reasonably require, any employee whose injury, sickness, mental or nervous disorder is the basis of claim upon this Plan.

  • Physical Condition Except as disclosed in the Physical Conditions Reports delivered to Lender in connecting with this Loan, to Borrower's knowledge, the Property, including, without limitation, all buildings, improvements, parking facilities, sidewalks, storm drainage systems, roofs, plumbing systems, HVAC systems, fire protection systems, electrical systems, equipment, elevators, exterior sidings and doors, landscaping, irrigation systems and all structural components, are in good condition, order and repair in all material respects; there exists no structural or other material defects or damages in the Property, whether latent or otherwise, and Borrower has not received notice from any insurance company or bonding company of any defects or inadequacies in the Property, or any part thereof, which would adversely affect the insurability of the same or cause the imposition of extraordinary premiums or charges thereon or of any termination or threatened termination of any policy of insurance or bond.

  • Annual Physical The Executive may, if the Executive so elects, within the twelve (12) months following the Date of Termination, receive an annual physical at the Company’s expense consistent with the physical provided under, and subject to the requirements of, the Company’s annual physical program as in effect immediately prior to the Date of Termination.

  • Physical Inventory The Contractor shall periodically perform, record, and disclose physical inventory results. A final physical inventory shall be performed upon contract completion or termination. The Property Administrator may waive this final inventory requirement, depending on the circumstances (e.g., overall reliability of the Contractor’s system or the property is to be transferred to a follow-on contract).

  • Physical Inventories (a) The Collateral Agent, at the expense of the Loan Parties, may participate in and/or observe each physical count and/or inventory of so much of the Collateral as consists of Inventory which is undertaken on behalf of the Borrowers so long as such participation does not disrupt the normal inventory schedule or process.

  • Physical Inspection Subject to the limitations set forth in this Section 4.1(c) and notwithstanding any provision to the contrary in this Agreement, commencing on the Effective Date and continuing through the Closing or any earlier termination of this Agreement, Buyer shall have the right, at Buyer’s expense, to make inspections (including tests, surveys and other studies) of the Real Property and all matters relating thereto, including, but not limited to, soils and geologic conditions, location of property lines, utility availability and use restrictions, environmental conditions, the manner or quality of the construction of the Improvements, the habitability, merchantability, marketability, profitability or fitness for a particular purpose of the Real Property, the effect of applicable planning, zoning and subdivision statutes, ordinances, regulations, restrictions and permits, the character and amount of any fees or charges that must be paid to further develop, improve and/or occupy the Real Property and all other matters relating to the Real Property. Prior to Closing, Buyer and its agents, contractors and subcontractors shall have the right to enter upon the Real Property, at reasonable times during ordinary business hours, to make inspections and tests as Buyer deems reasonably necessary and which may be accomplished without causing any material damage to the Real Property including, without limitation, the right to conduct a phase I environmental audit and an investigation with respect to the Real Property’s compliance with the requirements of Title III of the Americans with Disabilities Act of 1990. Notwithstanding the foregoing, in no event shall Buyer, its agents, contractors or subcontractors conduct any invasive testing on the Real Property without Seller’s prior written approval, which approval shall not be unreasonably withheld, conditioned or delayed. Buyer shall not materially interfere with any Tenant, occupant or invitee of the Real Property in making such inspections or tests, and shall return and restore the Property to substantially its original condition prior to such inspections or tests. Buyer shall not permit any liens or encumbrances to be placed against the Real Property in connection with Buyer’s investigation and inspection of the Real Property and/or in connection with Buyer’s activities on the Real Property. Buyer hereby agrees to and shall indemnify, defend and hold harmless Seller and Seller’s members, managers, partners, officers, directors, shareholders, employees, agents, representatives, invitees, successors and assigns (each, a “Seller Group Indemnitee”), from and against any and all claims, demands, and causes of action for personal injury or property damage, and all damages, judgments, liabilities, costs, fees and expenses (including reasonable attorneys’ fees) resulting therefrom, arising out of any entry onto the Real Property by Buyer, its agents, employees, contractors and/or subcontractors, pursuant to this Section 4.1(c) hereof, provided, however, Buyer shall not be obligated to indemnify, defend or hold harmless Seller or any Seller Group Indemnitee for any such claims, demands and/or causes of action or any such damages, judgments, liabilities, costs, fees or expenses caused by: (i) the discovery of conditions that were present before Buyer or its representatives entered onto the Real Property, or the accidental or inadvertent release of any Hazardous Materials that were in, on or under the Real Property prior to such entry; or (ii) the negligent or willful misconduct of Seller or any Seller Group Indemnitee. The covenants, agreements and obligations of Buyer set forth in this Section 4.1(c) shall survive the termination of this Agreement and the Closing, as applicable.

  • Physical Damage Insurance The Servicer shall, in accordance with its customary servicing procedures, require that each Obligor shall have obtained physical damage insurance covering the Financed Equipment as of the execution of the Receivable.

  • Physical Possession of Documents 4.1 During the term of the Pledge under this Agreement, the Pledgor shall deliver the physical possession of his/her Certificate of Capital Contribution and the Register of Shareholders of the Company to the Pledgee within one (1) week from the execution date of this Agreement.

Time is Money Join Law Insider Premium to draft better contracts faster.