Photometric measurements. 18 5 Minimum requirements for conformity of production control procedures.................................... 20 6 Minimum requirements for sampling by an inspector................................................................... 22
Photometric measurements. 1. When photometric measurements are taken, stray reflexions shall be avoided by appropriate masking.
Photometric measurements. 31 5 Minimum requirements for conformity of production control procedures....................................... 33 6 Minimum requirements for sampling by an inspector ..................................................................... 35 Scope This Regulation applies to: Front and rear position lamps and stop lamps for vehicles of categories L, M, N, O and T1; and, End-outline marker lamps for vehicles of categories M, N, O and T.
Photometric measurements. 3.1.2.1. Photometric measurements shall be carried out on the samples before and after the test.
Photometric measurements. 5 Minimum requirements for conformity of production control procedures......... 6 Minimum requirements for sampling by an inspector " The text of the Regulation, Paragraph 8., amend to read:
Photometric measurements. 17 4 Colour of white light ....................................................................................................................... 20 5 Minimum requirements for conformity of production control procedures ...................................... 21
Photometric measurements. 5 Photometric measurements for the rear-registration-plate illuminating device" Text of the Regulation,
Photometric measurements. 19 3 Front and rear position lamps, end-outline marker lamps and stop-lamps: minimum angles required for light distribution in space of these lamps ..................................................................... 22
Photometric measurements. 1. Measurement methods 1.1. During photometric measurements, stray reflections shall be avoided by appropriate masking. 1.2. In case the results of measurements should be challenged, measurements shall be carried out in such a way as to meet the following requirements:
Photometric measurements
