Phase 1 SCCHN Sample Clauses

Phase 1 SCCHN. VTX-2337 with Cetuximab (VRXP-A103) This ongoing, single-center phase 1b protocol at Seattle Cancer Care Alliance (Seattle, WA) is being conducted as an Investigator Sponsored Trial, with Xxxxx Xxxx, MD as the Sponsor-Investigator. VRXP-A103 assesses the safety and tolerability of VTX-2337 in combination with cetuximab. Cetuximab is administered weekly and VTX-2337 is administered weekly for three weeks of a four-week cycle. Three dose levels of VTX-2337 will be evaluated in a standard dose-escalation schema: 2.5 mg/m2, 3.0 mg/m2 and 3.5 mg/m2. Ten subjects with recurrent or metastatic SCCHN have been enrolled. The study regimen has been safe and adequately tolerated to date. There have been no dose-limiting toxicities; no serious, unexpected drug-related adverse events; and no evidence of synergistic toxicities between cetuximab and VTX-2337. Clinical tolerability data indicate that long-term dosing at 3.0 mg/m2 will be better tolerated than 3.5 mg/m2. Preliminary translational medicine results are available from the first two cohorts of SCCHN subjects who received VTX-2337 (2.5 and 3.0 mg/m2) in combination with cetuximab. Consistent with the data from the Phase 1 VRXP-A101 study, serum biomarkers consistent with TLR8 activation were readily measured at both dose levels. In additional, ex vivo analysis of NK cells collected pre-dose and 24 hours after dosing demonstrate NK cell activation. Given the proposed mechanism of VTX-2337 enhancing ADCC with cetuximab in an NK-dependent manner, these data provide important correlative information and suggest the doses of 2.5 or
AutoNDA by SimpleDocs
Phase 1 SCCHN. VTX-2337 with Cetuximab (VRXP-A103) This ongoing, single-center phase 1b protocol at Seattle Cancer Care Alliance (Seattle, WA) is being conducted as an Investigator Sponsored Trial, with Xxxxx Xxxx, MD as the Sponsor-Investigator. VRXP-A103 assesses the safety and tolerability of VTX-2337 in combination with cetuximab. Cetuximab is administered weekly and VTX-2337 is administered weekly for three weeks of a four-week cycle. Three dose levels of VTX-2337 are being evaluated in a standard dose- escalation schema: 2.5 mg/m2, 3.0 mg/m2, and 3.5 mg/m2. Enrollment is complete (n=13), and one subject remains on study. The study regimen has been safe and adequately tolerated. There have been no dose-limiting toxicities; no serious, unexpected drug-related adverse events; and no evidence of synergistic toxicities between cetuximab and VTX-2337. Clinical tolerability data indicate that long-term dosing at 3.0 mg/m2 will be better tolerated than 3.5 mg/m2. Translational medicine results are available from the first twelve subjects who received VTX-2337 (2.5, 3.0, or 3.5 mg/m2) in combination with cetuximab. As expected based on data from the Phase 1 VRXP-A101 study, serum biomarkers consistent with TLR8 activation were readily measured at both dose levels. In addition, ex vivo analysis of NK cells collected pre-dose and 24 hours after dosing demonstrate NK cell activation. Given the proposed mechanism of VTX-2337 enhancing ADCC with cetuximab in an NK-dependent manner, these data provide important correlative information and suggest the doses of 2.5, 3.0, and 3.5 mg/m2 are biologically active from a pharmacologic perspective. Based on preliminary efficacy data, 10 of the 13 subjects have been eligible for evaluation of tumor response: 2 subjects achieved a partial response, 4 subjects experienced disease stabilization, and 4 subjects had disease progression. One subject has not yet had a response assessment, and 2 subjects discontinued the study prematurely and were unevaluable for response assessment.[20]

Related to Phase 1 SCCHN

  • Phase 2 Phase 2 is expected to consist of Member Nodes and a select number of Nodes operated by non-Members. The non-Member Nodes will be required to comply with Node hosting terms as set forth by the Council, which may be amended from time to time (the “General Node Terms”).

  • Development Phase contractual phase initiated with the approval of ANP for the Development Plan and which is extended during the Production Phase while investments in xxxxx, equipment, and facilities for the Production of Oil and Gas according to the Best Practices of the Oil Industry are required.

  • Phase II A small portion of the work for the Phase II modifications to the Plattsburgh Substation will be performed by Transmission Owner, and the remainder will be performed by Clinton and Xxxxxxxxx. A detailed definition of the specific scope for Transmission Owner and Clinton and Xxxxxxxxx including interface points shall be defined during the design phase and, as such documents become available, copies will be delivered to the NYISO, Transmission Owner, Noble Altona Windpark, LLC and Marble River, LLC. The full scope includes the installation of wave traps, CCVT’s and modifications and/or additions to relaying on the MWP-1 and MWP- 2 lines. These lines will be reconfigured at the completion of Phase II to connect to Xxxxx and Xxxxxxx Substations on MWP-1 and the Xxxx Substation on MWP-2. Clinton and Xxxxxxxxx will design the upgrades and purchase the materials based on the outline specification that was prepared and issued by Transmission Owner. The work to be performed by Clinton and Xxxxxxxxx will include both the materials for the exterior and interior installations and items for Transmission Owner installation inside the control building in existing relay panels and communication racks. In addition, Clinton and Xxxxxxxxx will be responsible for the exterior and interior construction work and will provide construction management services in coordination with Transmission Owner. The civil design for the foundations and the electrical design for the cable runs to the control room will be designed by, as approved by Transmission Owner, and installed under the supervision and control of Clinton and Xxxxxxxxx. The equipment will be selected and procured in accordance with the specifications developed during the detailed engineering phase, copies of which shall be furnished to the NYISO, Transmission Owner, Noble Altona Windpark, LLC and Marble River, LLC. The construction of the foundations, structures, wave traps, CCTV and cable runs into the control building to the termination cabinets will be completed by Clinton and Xxxxxxxxx. The work at the Plattsburgh Substation will be installed under Transmission Owner’s CPP-1. Transmission Owner will provide Protection and Controls Engineering, install and terminate wiring from the termination cabinets to the control panels and relays, install relays and equipment in the existing panels, and will commission such work inside the 230kV control building. Transmission Owner will develop the communications protocols and data flow over the circuits.

  • Provisioning of High Frequency Spectrum and Splitter Space 3.2.1 BellSouth will provide <<customer_name>> with access to the High Frequency Spectrum as follows:

  • Design Development Phase Services 3.3.1 Based on the Owner’s approval of the Schematic Design Documents, and on the Owner’s authorization of any adjustments in the Project requirements and the budget for the Cost of the Work, the Architect shall prepare Design Development Documents for the Owner’s approval. The Design Development Documents shall illustrate and describe the development of the approved Schematic Design Documents and shall consist of drawings and other documents including plans, sections, elevations, typical construction details, and diagrammatic layouts of building systems to fix and describe the size and character of the Project as to architectural, structural, mechanical and electrical systems, and other appropriate elements. The Design Development Documents shall also include outline specifications that identify major materials and systems and establish, in general, their quality levels.

  • Construction Phase Services 3.1.1 – Basic Construction Services

  • Preconstruction Phase Services Preconstruction Phase Services shall mean all services described in Article 3.1, and any similar services described in the Request for Proposals, including such similar services as are described in the Construction Manager at Risk’s Response to the Request for Proposals to the extent they are accepted by Owner, but excluding any Early Work. Early Work shall be considered part of Construction Phase Services.

  • Design Development Phase INDICATE IN STATEMENT OF WORK “NOT APPLICABLE” IF SECTION IS NOT APPLICABLE

  • PHASE is a distinct portion of the Work to be provided under this Agreement, as specified in the Statement Of Work.

  • PRE-CONSTRUCTION PHASE SERVICES The Pre-Construction Phase shall be deemed to commence upon the date specified in a written Notice to Proceed with Pre-Construction Phase Services issued by Owner and shall continue through completion of the Construction Documents and procurement of all major Subcontractor agreements. Contractor is not entitled to reimbursement for any costs incurred for Pre-Construction Phase Services performed before issuance of the written Notice to Proceed. Pre-Construction Phase Services may overlap Construction Phase Services. Contractor shall perform the following Pre-Construction Phase Services:

Time is Money Join Law Insider Premium to draft better contracts faster.