Spare Parts Contractor shall be responsible for obtaining vendor recommendations for spare parts and delivering such recommendations and spare parts to Owner in accordance with Section 3.4 of the Agreement.
Spares Boeing will revise, as applicable, the customized Recommended Spares Parts List (RSPL) and Illustrated Parts Catalog (IPC).
Tooling Inventory that consists of tooling or replacement parts;
Inventory To the extent Inventory held for sale or lease has been produced by any Borrower, it has been and will be produced by such Borrower in accordance with the Federal Fair Labor Standards Act of 1938, as amended, and all rules, regulations and orders thereunder.
Quantity Seller shall exclusively make available to Buyer and Buyer agrees to purchase from Seller, during the term of this Agreement a quantity equal to 100% of the current and future production into the Points of Delivery. Except as otherwise provided in this Section, Seller shall deliver all gas it develops and produces into the Points of Delivery. Unless agreed to by Buyer Seller shall not sell any gas to any other party. It is currently estimated that Atlas Energy Group, Inc. and Atlas Resources, Inc. will collectively deliver approximately 27,000 Mcf per day and Resource Energy. Inc. will deliver approximately 7,000 Mcf per day at the Points of Delivery. Buyer and Seller agree to mutually cooperate and regularly meet to establish production schedules of gas into the Points of Delivery. Seller shall nominate, by the 25th calendar day of the preceding month, the daily volumes to be delivered during the following month to the Points of Delivery. Seller's daily deliveries shall be no greater than one hundred and ten percent (110%) or no less than ninety percent (90%) of Seller's daily nominated volume as long as Seller's deliveries at each Point of Delivery are at least 500 Mcf per day, with the exception of the Wheatland Dehydration Meter, for which the minimum volume is 300 Mcf per day. If Seller's daily volume delivery is less than ninety percent (90%) of Seller's daily nominated volume, then Seller's shall pay Buyer one hundred and two percent (102%) of the Buyer's replacement cost, less the price set forth on Schedule I, for the volume of gas which is the difference between Seller's daily volume delivery and ninety percent (90%) of Seller's daily nominated volume. If Seller's daily volume delivery is more than one hundred and ten percent (110%) of Seller's daily nominated volume, then, regardless of other pricing provisions contained in this Agreement, Buyer shall pay Seller ninety eight percent (98%) of the daily market price of each Point of Delivery, as set forth on Schedule I, for the volume of gas which is the difference between Seller's daily volume delivery and one hundred and ten percent (110%) of Seller's daily nominated volume. Notwithstanding the first paragraph of this Section 4, it is understood and agreed to by the parties that Seller shall continue to supply gas to its three (3) direct delivery customers, Wheatland Tube Company, CSC Industries and Xxxxxx Consolidated for the life of those agreements, including any extensions or renewals. Buyer and Seller agree that Buyer will provide all billing services for the above three (3) customers. Buyer agrees that it will not utilize Seller's local production, or any other source of supply, as source of sales to the above three (3) customers of Seller to the extent Buyer's offer would supplant or in any manner displace the existing amount of Seller's direct delivery agreements throughout the term of Seller's agreements with the above three (3) customers, including any extensions or renewals. Seller currently delivers 2,600 Mcf per day to the Wheatland Tube Company, 3,400 Mcf per day to CSC Industries and 325 Mcf per day to Xxxxxx Consolidated. Seller agrees that Buyer may sell any amount, in excess of Seller's current volumes (so long as Seller continues to have a contact with the above three (3) customers) to such customers. Buyer shall not be restricted in selling to any of the above three (3) customers if Seller no longer has a contract with such customer. Seller's commitment to deliver all of the gas it produces to Buyer is subject to the right of investors, including limited partnerships where Seller is acting as the General Partner, in xxxxx operated by Seller, to take their gas in kind. In the event a party wishes to take its gas in kind, Seller shall promptly notify Buyer. Seller further agrees to indemnify Buyer for full losses attributable to gas which has been taken in kind by investors in xxxxx operated by Seller, to the extent Buyer has incurred a loss on such gas because of a prior commitment by Buyer.
Supplies and Equipment Property Manager may purchase, provide and pay for out of the Operating Account (so long as contemplated by the Budget or deemed to be a Permitted Expenditure) all needed janitorial and maintenance supplies, tools and equipment, restroom and toilet supplies, light bulbs, paints and similar supplies necessary for the management, operation and maintenance of the Property (collectively, the “Supplies and Equipment”). Such Supplies and Equipment shall be the property of Company, shall be delivered to and stored at the Property and shall be used only in connection with the management, operation, and maintenance of the Property. Property Manager shall use commercially reasonable efforts to purchase all goods, supplies or services at the lowest cost reasonably available from reputable sources in the metropolitan area where the Property is located.
Furniture, Fixtures and Equipment Sublessee shall have the right to use during the Term the office furnishings and equipment within the Subleased Premises that are identified on Exhibit C attached hereto, as such exhibit may be adjusted by mutual agreement of the parties prior to the Third Floor Premises Delivery Date (the “Furniture”), provided Sublessee may only use the Furniture located in the Second Floor Premises after the Second Floor Commencement Date. The Furniture is provided in its “AS IS, WHERE IS” condition, without representation or warranty whatsoever. Sublessee shall insure the Furniture under the property insurance policy required under the Master Lease, as incorporated herein, and pay all taxes with respect to the Furniture. Sublessee shall maintain the Furniture in good condition and repair, reasonable wear and tear excepted, and shall be responsible for any loss or damage to the same occurring during the Term. Sublessee shall surrender the Furniture to Sublessor upon the termination of this Sublease in the same condition as exists as of the applicable Delivery Date, reasonable wear and tear excepted. Sublessee shall not remove any of the Furniture from the Subleased Premises. Notwithstanding anything to the contrary herein, Sublessee may provide Sublessor with written notice one (1) time not less than forty-five (45) days prior to the Third Floor Premises Delivery Date that lists any items of Furniture that Sublessee does not want to use and Sublessor shall, at no cost to Sublessee, remove such items from the Subleased Premises prior to the Third Floor Premises Delivery Date and such items shall no longer be considered Furniture hereunder. Notwithstanding the foregoing, provided Sublessee is not in default beyond the expiration of any applicable cure or grace period as of the date of the expiration or earlier termination of this Sublease, which condition may be waived by Sublessor in its sole discretion, then upon the expiration or earlier termination of this Sublease, the Furniture shall become the property of Sublessee, and Sublessee shall accept the same in its “AS IS, WHERE IS” condition, without representation or warranty whatsoever except as provided in the Bill of Sale referred to in the following sentence. In the event the Furniture is to become the property of Sublessee upon the expiration or earlier termination of this Sublease pursuant to the terms of the immediately preceding sentence, then Sublessor agrees to execute and deliver to Sublessee a Bill of Sale in the form of Exhibit D attached hereto conveying and transferring to Sublessee the Furniture.
Machinery and Equipment Except for items disposed of in the ordinary course of business, all machinery, tools, furniture, fixtures, equipment, vehicles, leasehold improvements and all other tangible personal property (hereinafter “Fixed Assets”) of the Company currently being used in the conduct of its business, or included in determining the net book value of the Company on the Balance Sheet Date, together with any machinery or equipment that is leased or operated by the Company, are in fully serviceable working condition and repair. Said Fixed Assets shall be maintained in such condition from the date hereof through the Closing Date. Except as described on Schedule 4.14 hereto, all Fixed Assets owned, used or held by the Company are situated at its business premises and are currently used in its business. Schedule 4.14 describes all Fixed Assets owned by or an interest in which is claimed by any other person (whether a customer, supplier or other person) for which the Company is responsible (copies of all agreements relating thereto being attached to said Schedule 4.14), and all such property is in the Company’s actual possession and is in such condition that upon the return of such property in its present condition to its owner, the Company will not be liable in any amount to such owner. There are no outstanding requirements or recommendations by any insurance company that has issued a policy covering either (i) such Fixed Assets or (ii) any liabilities of the Company relating to operation of the Business, or by any board of fire underwriters or other body exercising similar functions, requiring or recommending any repairs or work to be done on any Fixed Assets or any changes in the operations of the Business, any equipment or machinery used therein, or any procedures relating to such operations, equipment or machinery. All Fixed Assets of the Company are set forth on Schedule 4.14 hereto.
Replacement Parts Replacement parts for goods purchased by Buyer hereunder are for the purpose of this Section defined as “Parts” and are included in the definition of “goods” under this Order. For all goods ordered by Buyer’s Measurement and Control Solutions. Industrial Solutions or Wind Energy businesses and if expressly required on the face of this Order by another Affiliate, group, division and/or business unit or Buyer, Seller shall provide Parts: (i) to Buyer’s Measurement and Control Solutions and Industrial Solutions businesses for a period of […***…]; and (ii) to Buyer’s Wind Energy business for a period of […***…]. Seller shall continue to supply such Parts past the […***…] or […***…] for so long as the Seller continues to produce goods for Buyer. After a good is no longer in production, the prices for Parts shall be […***…] of those amounts. No minimum order requirements shall apply unless the parties mutually agree in advance. After the end of the above referenced periods. Seller shall continue to maintain in good working condition all Seller-owned tooling required to produce the Parts, and shall not dispose of such tooling without first contacting Buyer and offering Buyer the right to purchase such tooling from Seller. Seller’s obligations with regard to Buyer owned tooling are set forth in Section 4, “Buyer’s Property”.
Fixtures and Equipment Each of the Company and its Subsidiaries (as applicable) has good title to, or a valid leasehold interest in, the tangible personal property, equipment, improvements, fixtures, and other personal property and appurtenances that are used by the Company or its Subsidiary in connection with the conduct of its business (the “Fixtures and Equipment”). The Fixtures and Equipment are structurally sound, are in good operating condition and repair, are adequate for the uses to which they are being put, are not in need of maintenance or repairs except for ordinary, routine maintenance and repairs and are sufficient for the conduct of the Company’s and/or its Subsidiaries’ businesses (as applicable) in the manner as conducted prior to the Closing. Each of the Company and its Subsidiaries owns all of its Fixtures and Equipment free and clear of all Liens except for (a) liens for current taxes not yet due and (b) zoning laws and other land use restrictions that do not impair the present or anticipated use of the property subject thereto.
