Part 4 Sample Clauses

Part 4. 16(a) of the Company Disclosure Schedule contains a correct and complete list identifying each material Company Employee Plan. With respect to each material Company Employee Plan, the Company has Made Available to Parent correct and complete copies of (where applicable): (i) the most recent determination, opinion, or advisory letter, if any, from the United States Internal Revenue Services (“IRS”) for any Company Employee Plan that is intended to qualify pursuant to Section 401(a) of the Code; (ii) the plan documents (or, with respect to any unwritten material Company Employee Plan, a written summary of the material terms thereof), together with all amendments thereto, (iii) summary plan descriptions, together with any summaries of material modifications; (iv) any related trust agreements or other funding instruments and all amendments thereto; (v) any material correspondence to or from any Governmental Authority within the past three years, including any materials relating to any government investigation or audit or any submissions under any voluntary compliance procedures; (vi) the most recent annual report required to be filed with any Governmental Authority; (vii) the two most recently prepared actuarial valuation reports; and (viii) the most recently prepared financial statements.
AutoNDA by SimpleDocs
Part 4. Financial Evaluation P R E V I E W The financial offers for tenders which were not eliminated during the technical evaluation (i.e., those found to be technically compliant) will be evaluated. The Evaluation Committee will check that the financial offers contain no arithmetical errors as outlined in Clause 31. [If the tender procedure contains several lots, financial offers are compared for each lot.] The financial evaluation will have to identify the best financial offer [for each lot].
Part 4. Description Choices Value
Part 4. Product development at the system level, Clause 6.4.2.3 „For each safety mechanism that enables an item to achieve or maintain a safe state the follow- ing shall be specified: a) the transition to the safe state; b) the fault tolerant time interval; c) the emergency operation interval, if the safe state cannot be reached immediately; and d) the measures to maintain the safe state.” Recommendation: This requirement should be represented in a checklist to be used in the de- sign level modeling ("For each safety mechanism represented in a design model, have the fol- lowing been specified?...").
Part 4. 10(i) of Aprion Disclosure Schedule contains a true, correct and complete copy of Aprion and its subsidiaries standard warranty or warranties for sales of their products or services rendered and, except as stated therein, there are no (i) warranties, commitments or EXECUTION COPY obligations with respect to the return, repair, or replacement of products, (ii) commitments or undertakings by Aprion or its subsidiaries to refund all or part of the amount paid to them in respect of such products or services or (iii) provisions for extended warranty period. There are no defects in such products, of which Aprion is aware, that would materially and adversely affect, in the short term and for the life of the product, their performance or create an unusual risk of injury to property. The products have been designed and manufactured so as to meet and comply with all applicable governmental standards and specifications currently in effect in all material respects (as applicable to the manner in which its business is currently conducted), and have received all governmental approvals necessary to allow their sale and use.
Part 4. 1. On the first Business Day as of which all of the steps set out in Part 1, Part 2 and Part 3 of this Schedule 3 have been completed, the Completion will be deemed consummated and:
Part 4. In addition to Parts 1, 2 and 3, Tenant may, at its option by written notice delivered to Landlord on or prior to the Commencement Date, also lease from Landlord all, or the following described portions of, floors 22, 23 and 24 of the Building. To the extent that Tenant does not lease all of floors 22, 23 and 24 pursuant to this Paragraph 32.A., Tenaxx'x xption hereunder shall apply first to space on the 24th floor, then the 23rd floor and, then the 22nd floor; and if Tenant leases less than a full floor hereunder, it shall lease not less than five thousand (5,000) square feet of Rentable Area on either the 23rd and 24th floors and not less than ten thousand (10,000) square feet of Rentable Area on the 22nd floor (such partial floor space to be in such location, size and configuration on the floor as Tenant shall designate, subject to Landlord's approval, which shall not be unreasonably withheld or delayed). Any space leased under the provisions of this Paragraph 32.A. shall be designated as "PART 4" of the Premises and shall be leased to Tenant upon the same terms as those applicable to Part 3 (subject, however, to necessary adjustments of the Part 4 Commencement Date and references to time periods to reflect the actual date of substantial completion and occupancy of Part 4) except that the Part 4 Term shall be adjusted so as to end on the same date as the Part 3 Term. Tenant shall be entitled to have constructed on Part 4 at Landlord's cost in accordance with the Work Letter tenant improvements of the same scope, quality and nature as are to be constructed on floor 31 of the Premises.
AutoNDA by SimpleDocs
Part 4. 16(a) of the Company Disclosure Schedule contains a correct and complete list identifying, to the extent material, each Company Employee Plan. “Company Employee Plan” means (i) each “employee benefit plan,” as defined in Section 3(3) of ERISA (whether or not subject to ERISA), (ii) each employment, severance or similar contract, plan, arrangement or policy and (iii) each other plan or arrangement providing for compensation, bonuses, profit-sharing, stock option or other stock-related rights or other forms of incentive or deferred compensation, insurance (including any self-insured arrangements), health or medical benefits, employee assistance program, disability or sick leave benefits, supplemental unemployment benefits, severance benefits and post-employment or retirement benefits (including compensation, pension, health, medical or life insurance benefits), other than, in the case of clause (ii), any such contract, plan, arrangement or policy that is terminable “at will” (or following a notice period imposed by Applicable Law) without any contractual obligation on the part of the Company or any Subsidiary of the Company to make any severance, termination, change in control, or similar payment, which, in each case, is maintained, administered or contributed to by the Company or any Subsidiary of the Company or with respect to which the Company or any Subsidiary of the Company could incur material liability; provided, however, in the case of clause (ii), each contract, plan, arrangement or policy that provides any contractual obligation on the part of the Company or any Subsidiary of the Company to make any severance, termination, change in control or other similar payment in excess of $100,000 shall be considered a material Company Employee Plan.

Related to Part 4

  • Appendix The following definitions shall be in effect under the Agreement:

  • SERVICE LEVEL DESCRIPTION The Fund Accounting Agreement is hereby amended by deleting the Service Level Description attached thereto and replacing it in its entirety with the Service Level Description attached hereto.

  • List of Plans Set forth in Section 3.15(a) of the Company Disclosure Schedule is an accurate and complete list of all domestic and foreign (i) “employee benefit plans,” within the meaning of Section 3(3) of ERISA; (ii) bonus, stock option, stock purchase, restricted stock, incentive, fringe benefit, “voluntary employees’ beneficiary associations” (“VEBAs”) under Section 501(c)(9) of the Internal Revenue Code, profit-sharing, pension or retirement, deferred compensation, medical, life insurance, disability, accident, salary continuation, severance, accrued leave, vacation, sick pay, sick leave, supplemental retirement and unemployment benefit plans, programs, arrangements, commitments and/or practices (whether or not insured); and (iii) employment, consulting, termination, and severance Contracts; in each case for active, retired or former employees or directors, whether or not any such plans, programs, arrangements, commitments, Contracts and/or practices (referred to in (i), (ii) or (iii) above) are in writing or are otherwise exempt from the provisions of ERISA; that have been established, maintained or contributed to (or with respect to which an obligation to contribute has been undertaken) or with respect to which any potential liability is borne by the Company or any of its Subsidiaries (including, for this purpose and for the purpose of all of the representations in this Section 3.15, any predecessors to the Company or to any of its Subsidiaries and all employers (whether or not incorporated) that would be treated together with the Company or any of its Subsidiaries as a single employer (1) within the meaning of Section 414 of the Internal Revenue Code, or (2) as a result of the Company or any Subsidiary having been a general partner of any such employer), since September 2, 1974 (“Employee Benefit Plans”).

  • APPENDIX H Appendix H, Contractor’s Insurance Requirements, attached hereto, is hereby expressly made a part of this Contract as fully as if set forth at length herein. The Contractor shall maintain in force at all times during the terms of the resultant Contract, policies of insurance pursuant to the requirements outlined in Appendix H – Contractor’s Insurance Requirements.

  • Additional Provisions Relating to Customer 6.1 Representations of Customer and Bank

  • Data Privacy Participant hereby explicitly and unambiguously consents to the collection, use and transfer, in electronic or other form, of Participant’s personal data as described in this Award Agreement and any other Restricted Stock Unit grant materials by and among, as applicable, the Employer, the Company and any Parent or Subsidiary for the exclusive purpose of implementing, administering and managing Participant’s participation in the Plan. Participant understands that the Company and the Employer may hold certain personal information about Participant, including, but not limited to, Participant’s name, home address and telephone number, date of birth, social insurance number or other identification number, salary, nationality, job title, any Shares or directorships held in the Company, details of all Restricted Stock Units or any other entitlement to Shares awarded, canceled, exercised, vested, unvested or outstanding in Participant’s favor (“Data”), for the exclusive purpose of implementing, administering and managing the Plan. Participant understands that Data will be transferred to a stock plan service provider as may be selected by the Company in the future, which is assisting the Company with the implementation, administration and management of the Plan. Participant understands that the recipients of the Data may be located in the United States or elsewhere, and that the recipients’ country of operation (e.g., the United States) may have different data privacy laws and protections than Participant’s country. Participant understands that if he or she resides outside the United States, he or she may request a list with the names and addresses of any potential recipients of the Data by contacting his or her local human resources representative. Participant authorizes the Company, any stock plan service provider selected by the Company and any other possible recipients which may assist the Company (presently or in the future) with implementing, administering and managing the Plan to receive, possess, use, retain and transfer the Data, in electronic or other form, for the sole purpose of implementing, administering and managing his or her participation in the Plan. Participant understands that Data will be held only as long as is necessary to implement, administer and manage Participant’s participation in the Plan. Participant understands if he or she resides outside the United States, he or she may, at any time, view Data, request additional information about the storage and processing of Data, require any necessary amendments to Data or refuse or withdraw the consents herein, in any case without cost, by contacting in writing his or her local human resources representative. Further, Participant understands that he or she is providing the consents herein on a purely voluntary basis. If Participant does not consent, or if Participant later seeks to revoke his or her consent, his or her status as a Service Provider and career with the Employer will not be adversely affected; the only adverse consequence of refusing or withdrawing Participant’s consent is that the Company would not be able to grant Participant Restricted Stock Units or other equity awards or administer or maintain such awards. Therefore, Participant understands that refusing or withdrawing his or her consent may affect Participant’s ability to participate in the Plan. For more information on the consequences of Participant’s refusal to consent or withdrawal of consent, Participant understands that he or she may contact his or her local human resources representative.

  • LIST OF ATTACHMENTS Attachment 1: Acronyms and Abbreviations Attachment 2: Cost/Price – Government Site (Contractor’s Cost/Price- Government Site – Contractor’s Proposal dated 11/17/06 is incorporated herein by reference.) Attachment 3: Cost/Price – Contractor Site (Contractor’s Cost/Price-Contractor Site – Contractor’s Proposal dated 11/17/07 is incorporated herein by reference.) Attachment 4: Labor Category Descriptions Attachment 5: Federal Enterprise Architecture/Department. of Defense Enterprise Architecture Overview Attachment 6: Past Performance Tables (Not Applicable) (END OF SECTION J) SECTION J ATTACHMENT 1‌ ACRONYMS AND ABBREVIATIONS ACO Administrative Contracting Officer ADR Alternative Dispute Resolution ATM Asynchronous Transfer Mode CAF Contract Access Fee CAS Cost Accounting Standards CAV Contractor Assisted Visits CCR Central Contractor Registration CDA Contract Disputes Act of 1978 CFE Contractor Furnished Equipment CLIN Contract Line Item Number CO Contracting Officer CONUS Continental United States COR Contracting Officer’s Representative COTR Contracting Officer’s Technical Representative CPS Contractor Performance System CRM Customer Relationship Management CSO Cognizant Security Office D&F Determination and Findings DBA Xxxxx Xxxxx Act DCAA Defense Contract Audit Agency DCMA Defense Contract Management Agency DOL Department of Labor DPA Delegation of Procurement Authority DSL Digital Subscriber Line DUNS Data Universal Numbering System EAI Enterprise Application Integration EDI Electronic Data Interchange EEO Equal Employment Opportunity EFT Electronic Funds Transfer eSRS Electronic Subcontracting Reporting System EVMS Earned Value Management System FEA Federal Enterprise Architecture; also Department of Defense Enterprise Architecture (DoDEA). FAS Federal Acquisition Service FOIA Freedom of Information Act FPDS-NG Federal Procurement Data System-Next Generation FTP File Transfer Protocol FTR Federal Travel Regulations G&A General and Administrative GFE Government Furnished Equipment GFM Government Furnished Material GFP Government Furnished Property GPS Global Positioning Systems GSA General Services Administration GWAC Government Wide Acquisition Contract HCA Head of Contracting Activity HTTP HyperText Transfer Protocol ITMRA Information Technology Management Reform Act J&A Justification and Approval JTR Joint Travel Regulations L-H Labor Hour MA/IDIQ Multiple Award Indefinite-Delivery Indefinite-Quantity MOM Messaging-Oriented Middleware MOU Memorandum of Understanding MPIN Marketing Partner Identification Number NAICS North American Industrial Classification System OCI Organizational Conflict of Interest OCO Ordering Contracting Officer OCONUS Outside of Continental United States OCR Optical Character Recognition ODBC Open DataBase Connectivity ODC Other Direct Cost OLAP OnLine Analytical Processing OMB Office of Management and Budget ORB Object Request Broker ORCA Online Representations and Certifications Application PBSOW Performance-Based Statement of Work PCO Procuring Contracting Officer PMO Program Management Office POC Point of Contact PPIRS Past Performance Information Retrieval System PWS Performance Work Statement QASP Quality Assurance Surveillance Plan RADIUS Remote Authentication Dial-In User Service RDF Resource Description Framework RFP Request for Proposal SCA Service Contract Act SMTP Simple Mail Transfer Protocol SOAP Simple Object Access Protocol SOO Statement of Objectives SOW Statement of Work SRM Service Component Reference Model SQL Structured Query Language T&M Time & Materials TOR Task Order Request TRM Technical Reference Model UDDI Universal Description, Discovery and Integration VPN Virtual Private Network VSC Vendor Support Center WSDL Web Services Description Language XML EXtensible Markup Language FORMS DD254 Contract Security Classification Specification GSA 527 Contractor’s Qualifications and Financial Information (END OF SECTION J, ATTACHMENT 1) SECTION J ATTACHMENT 4‌‌ LABOR CATEGORY DESCRIPTIONS Knowledge/Skill Levels: Many functional labor categories below (marked with “#”) are further subdivided by knowledge/skill level. Definitions of these knowledge/skill levels are shown in this chart: Level Knowledge/Skill Description Entry-Level Applies fundamental concepts, processes, practices, and procedures on technical assignments. Performs work that requires practical experience and training. Work is performed under supervision. Journeyman Possesses and applies expertise on multiple complex work assignments. Assignments may be broad in nature, requiring originality and innovation in determining how to accomplish tasks. Operates with appreciable latitude in developing methodology and presenting solutions to problems. Contributes to deliverables and performance metrics where applicable. Senior Possesses and applies a comprehensive knowledge across key tasks and high impact assignments. Plans and leads major technology assignments. Evaluates performance results and recommends major changes affecting short-term project growth and success. Functions as a technical expert across multiple project assignments. May supervise others. Master Provides technical/management leadership on major tasks or technology assignments. Establishes goals and plans that meet project objectives. Has domain and expert technical knowledge. Directs and controls activities for a client, having overall responsibility for financial management, methods, and staffing to ensure that technical requirements are met. Interactions involve client negotiations and interfacing with senior management. Decision making and domain knowledge may have a critical impact on overall project implementation. May supervise others. The “G” in the labor identification (ID) numbers below indicate Government-Site Work (see Section J, Attachment 2). The “C” in the labor ID numbers below indicate Contractor-Site Work (see Section J, Attachment 3). Administration/Clerical (101G# and 101C#)

  • Provisions Relating to Accounts (a) Anything herein to the contrary notwithstanding, each of the Grantors shall remain liable under each of the Accounts to observe and perform all the conditions and obligations to be observed and performed by it thereunder, all in accordance with the terms of any agreement giving rise to each such Account. Neither the Administrative Agent nor any holder of the Secured Obligations shall have any obligation or liability under any Account (or any agreement giving rise thereto) by reason of or arising out of this Security Agreement or the receipt by the Administrative Agent or any holder of the Secured Obligations of any payment relating to such Account pursuant hereto, nor shall the Administrative Agent or any holder of the Secured Obligations be obligated in any manner to perform any of the obligations of a Grantor under or pursuant to any Account (or any agreement giving rise thereto), to make any payment, to make any inquiry as to the nature or the sufficiency of any payment received by it or as to the sufficiency of any performance by any party under any Account (or any agreement giving rise thereto), to present or file any claim, to take any action to enforce any performance or to collect the payment of any amounts that may have been assigned to it or to which it may be entitled at any time or times.

  • Special Provisions Relating to Euro Each obligation hereunder of any party hereto that is denominated in the National Currency of a state that is not a Participating Member State on the date hereof shall, effective from the date on which such state becomes a Participating Member State, be redenominated in Euro in accordance with the legislation of the European Union applicable to the European Monetary Union; provided that, if and to the extent that any such legislation provides that any such obligation of any such party payable within such Participating Member State by crediting an account of the creditor can be paid by the debtor either in Euros or such National Currency, such party shall be entitled to pay or repay such amount either in Euros or in such National Currency. If the basis of accrual of interest or fees expressed in this Agreement with respect to an Agreed Foreign Currency of any country that becomes a Participating Member State after the date on which such currency becomes an Agreed Foreign Currency shall be inconsistent with any convention or practice in the interbank market for the basis of accrual of interest or fees in respect of the Euro, such convention or practice shall replace such expressed basis effective as of and from the date on which such state becomes a Participating Member State; provided that, with respect to any Borrowing denominated in such currency that is outstanding immediately prior to such date, such replacement shall take effect at the end of the Interest Period therefor. Without prejudice to the respective liabilities of the Borrower to the Lenders and the Lenders to the Borrower under or pursuant to this Agreement, each provision of this Agreement shall be subject to such reasonable changes of construction as the Administrative Agent may from time to time, in consultation with the Borrower, reasonably specify to be necessary or appropriate to reflect the introduction or changeover to the Euro in any country that becomes a Participating Member State after the date hereof; provided that the Administrative Agent shall provide the Borrower and the Lenders with prior notice of the proposed change with an explanation of such change in sufficient time to permit the Borrower and the Lenders an opportunity to respond to such proposed change.

Time is Money Join Law Insider Premium to draft better contracts faster.