Packaging Configuration Sample Clauses

Packaging Configuration. The Tip and Shaft protector shall be included into the Design. · The Scratch Pad shall be packaged with the Device. · The Device will be packaged in a Sterile Pouch.
Sample 1Sample 2Sample 3See All (4)
AutoNDA by SimpleDocs
Packaging Configuration. Within five (5) days after the Effective Date, Salix shall supply Xxxxxx with Salix’s labeling for the Branded Product. Within fourteen (14) days after Xxxxxx’x receipt of such labeling, Xxxxxx shall provide to Salix proposed camera ready artwork for the labeling and packaging for the Generic Product which shall be consistent with the labeling and packaging of the Branded Product; provided that the labeling and packaging for the Generic Product shall have appropriate references to Xxxxxx and the NDC Numbers obtained pursuant to Section 2.7 and no reference to the Trademark. The labeling and packaging for the Generic Product shall be subject to the prior approval of Salix, which approval shall not be unreasonably withheld or delayed. Salix shall only be obligated to supply to Xxxxxx Generic Product in the packaging configurations set forth in Exhibit X. Xxxxxx shall be solely responsible for the content of all labeling and packaging print copy and Xxxxxx shall ensure that all such labeling and packaging print copy complies with all Applicable Laws. Any changes to the packaging and labeling of the Generic Product requested by Xxxxxx shall require the prior written consent of Salix, which approval shall not be unreasonably withheld or delayed. If Salix consents to such changes, such changes shall be effected at Xxxxxx’x sole cost and expense. [*] Confidential treatment requested; certain information omitted and filed separately with the SEC.
Sample 1Sample 2Sample 3
Packaging Configuration. American Regent shall sell the Product with CytoDyn’s labeling and packaging, bearing American Regent’s NDC Number, and clearly identifying American Regent solely as the distributor of the Product. [***] after receiving FDA approval of its own labeling and packaging for the Product, CytoDyn shall supply American Regent with copies of CytoDyn’s approved labeling and packaging for the Product. CytoDyn’s labeling and packaging shall identify CytoDyn’s manufacturer of the Product. [***] after American Regent’s receipt of such labeling, American Regent shall provide to CytoDyn proposed camera ready artwork for the labeling and packaging for the Product American Regent will sell, which shall be consistent with the labeling and packaging of the Product provided by CytoDyn, with the addition of the American Regent’s NDC Number obtained pursuant to Section 3.3. The American Regent labeling and packaging for the Product shall be subject to the prior approval of CytoDyn, which approval shall not be unreasonably withheld or delayed. CytoDyn shall only be obligated to supply to American Regent the Product in mutually agreed upon packaging configurations, including, but not limited to pallet level aggregation for serialization. Any changes to the packaging and labeling of Product requested by American Regent shall require the prior written consent of CytoDyn, which approval shall not be unreasonably withheld or delayed. If CytoDyn consents to such changes, such changes shall be effected at American Regent’s sole cost and expense.
Sample 1Sample 2
Packaging Configuration. 5.1.1 The product is produced in three sizes: 2” x 2” (5 cm x 5 cm), 4” x 5” (10 cm x 12.5 cm) and 6” x 6” (15 cm x 15 cm).
Sample 1
Packaging Configuration. 9.1.1 The product will be produced in one size: 5” x 5” that will be packaged in a 7” x 10” peelable pouch. The pouches will be packaged 5 per box and the boxes will be contained in plain cardboard cases.
Sample 1
Packaging Configuration. 30 Gram Tube Component Dimensions Tube (Aluminum) 130 (H) x 22 (D) Carton (4 panels) 37.00 (L) x 36.00 (W) x 145.00 (H) Insert Roll Feed 7 1/2 (L) x 12 1/8 (W) (max size) Shipper 72 per Shipper Bundled by 12 5Gram Tube Component Dimensions Tube (Aluminum) 93 mm (H) x 13.5 mm (D) Carton (TBD) Insert (TBD) Shipper
Sample 1
Packaging Configuration. 5.1.1 The product is produced in one size: 1” diameter dressing with 4 mm insertion site.
Sample 1
AutoNDA by SimpleDocs

Related to Packaging Configuration

  • Configuration The configuration for the Purchase Right Aircraft will be the Detail Specification for Model 767-3S2F aircraft at the revision level in effect at the time of the Supplemental Agreement. Such Detail Specification will be revised to include (i) changes required to obtain required regulatory certificates and (ii) other changes as mutually agreed upon by Boeing and Customer.

  • AIRCRAFT CONFIGURATION The guarantees defined in Paragraphs 2 and 3 below (the “Guarantees”) are applicable to the A321 Aircraft as described in the A321 Standard Specification ***** as amended by the following SCNs:

  • Technical Specifications The Technical Specifications furnished on the CD are intended to establish the standards for quality, performance and technical requirements for all labor, workmanship, material, methods and equipment necessary to complete the Work. When specifications and drawings are provided or referenced by the County, these are to be considered part of the Scope of Work, and to be specifically documented in the Detailed Scope of Work. For convenience, the County supplied specifications, if any, and the Technical Specifications furnished on the CD.

  • Product Specifications The Company agrees that all Products sold to Xxxx hereunder shall conform to the respective specifications set forth on Schedule A or to such other specifications as are from time to time agreed upon by the Parties.

  • Changes to Specifications All Specifications and any changes thereto agreed to by the parties from time to time shall be in writing, dated and signed by the parties. Any change to the Packaging process shall be deemed a Specification change. No change in the Specifications shall be implemented by PCI, whether requested by Client, requested by PCI or requested or required by any Regulatory Authority, until the parties have agreed in writing to such change, the implementation date of such change, and any increase or decrease in costs, expenses or fees associated with such change (including any change to Pricing). PCI shall respond promptly to any request made by Client for a change in the Specifications, and both parties shall use commercially reasonable, good faith efforts to agree to the terms of such change in a timely manner. As soon as possible after a request is made for any change in Specifications, PCI shall notify Client of the costs associated with such change and shall provide such supporting documentation as Client may reasonably require. Client shall pay all costs associated with such agreed upon changes. If there is a conflict between the terms of this Agreement and the terms of the Specifications, this Agreement shall control. PCI reserves the right to postpone effecting changes to the Specifications, or in the case of changes requested or required by any Regulatory Authority postpone Packaging under this Agreement, until such time as the parties agree to and execute the required written amendment.

  • Manufacturing (a) The Supplier shall without limitation be responsible, at no additional cost to the Purchaser, for: sourcing and procuring all raw materials for the Products; obtaining all necessary approvals, permits and licenses for the manufacturing of the Products; providing sufficient qualified staff and workers to perform the obligations under this Purchase Agreement; implementing and maintaining effective inventory and production control procedures with respect to the Products; and handling other matters as reasonably requested by the Purchaser from time to time.

  • Training Materials Training Materials will be provided for each student. Training Materials may be used only for either (i) the individual student’s reference during Boeing provided training and for review thereafter or (ii) Customer’s provision of training to individuals directly employed by the Customer.

  • Product Description The lead products covered by this Settlement Agreement is limited to following Amazon Identification Number (ASIN) B0BBMRLNV9, with the description, "Lesnow 63-37 Tin Lead Rosin Core Solder Wire for Electrical Soldering 0.8mm Soldering Wire Electronics Solder Content Solder Flux 1.8% (0.8mm, 50g)," which was offered for sale by the Settling Entity on xxxxxx.xxx, hereinafter the “Product” or “Products.”

  • API If the Software offers integration capabilities via an API, your use of the API may be subject to additional costs or Sage specific policies and terms and conditions (which shall prevail in relation to your use of the API). You may not access or use the API in any way that could cause damage to us or the Software, or in contravention of any applicable laws. We reserve the right in our sole discretion, to: (i) update any API from time to time; (ii) place limitations around your use of any API; and (iii) deny you access to any API in the event of misuse by you or to otherwise protect our legitimate interests.

  • Packaging Tangible product shall be securely and properly packed for shipment, storage, and stocking in appropriate, clearly labeled, shipping containers and according to accepted commercial practice, without extra charge for packing materials, cases, or other types of containers. All containers and packaging shall become and remain Customer’s property.

Time is Money Join Law Insider Premium to draft better contracts faster.