Other characteristics Sample Clauses

Other characteristics. The Absorbing SICAV and the Absorbed Fund have the BANQUE FEDERATIVE DU CREDIT MUTUEL as their custodian. The Absorbed Fund and the Absorbing SICAV have an identical investment objective, investment strategy and asset composition. The Absorbing SICAV and the Absorbed Fund are open to all subscribers. The Absorbing SICAV and the Absorbed Fund are accumulation and distribution UCIs with respect to distributable amounts. The fees and commissions of the Absorbed Fund are currently as follows and shall also apply mutatis mutandis to the Absorbing SICAV: Subscription and redemption fees Fees are to be paid by investors upon subscription or redemption Basis Rate scale Subscription fees not paid to the UCITS net asset value × number of units Maximum 2% Subscription fees paid to the UCITS net asset value × number of units None Redemption fees not paid to the UCITS net asset value × number of units None Redemption fees paid to the UCITS net asset value × number of units None Management and administration fees Fees charged to the UCITS Basis Rate scale Unit Class RC Unit Class RD Unit Class R Unit Class IC Unit Class S 1 Financial management fees and administration fees external to the Portfolio Management Company* Net assets Maximum 1.7940% inclusive of tax Maximum 1.7940% inclusive of tax Maximum 2.250% inclusive of tax Maximum 0.897% inclusive of tax Maximum 1.40% inclusive of tax 2 Transfer fees Portfolio Management Company: 100% Levy on each transaction From 0% to maximum of 0.10% in equities, inclusive of tax 3 Performance fee Net assets None * Non-recurring costs linked to the recovery of claims on behalf of the Mutual Fund or to a procedure for enforcing a claim may be added to the ongoing fees invoiced to the UCITS and listed above.
Sample 1Sample 2Sample 3See All (45)
AutoNDA by SimpleDocs
Other characteristics. The Absorbing SICAV and the Absorbed Fund have the BANQUE FEDERATIVE DU CREDIT MUTUEL as their custodian. Your fund's current investment objective is to seek to outperform companies in the commodities sector over the recommended investment period. From 60% to 110% is exposed to equities from all sectors linked to commodities, all geographical areas, all capitalisations and to futures contracts on commodity futures indices, of which at least 60% to the equity markets. Exposure to fixed income instruments from 0% to 10% of sovereign debt, issued by the public or private sector, in all geographical areas (including emerging markets), in all rating categories, as assessed by the portfolio management company or the rating agencies, or unrated. After the merger, your fund's investment objective will be to seek performance net of fees linked to the changes in gold mining and commodities related stocks, without limitation and through selective management of gold and natural resources related stocks over the recommended investment period. Henceforth the manager will not gain exposure to commodities via futures but solely via equities. This exposure shall range from 60% to 110% to the equity markets of all geographical areas, including emerging markets, of all market capitalisations, and from all sectors, of which from 60% to 110% to the equity markets linked to gold and natural resources; A minimum of 50% to equity markets linked to gold mining. Interest rate risk exposure shall range from 0% to 10% invested in sovereign debt instruments, issued by the public or private sector, in all geographical areas including emerging markets, in the Investment Grade category, as assessed by the management company or the rating agencies. This exposure to interest rate risk is decreasing as it will be limited to Investment Grade securities. However, the SRRI of your fund will increase from 6 to 7 due to its exposure to fixed income and equity markets which may experience significant fluctuations. Information on the amendments is detailed in the comparative table in Appendix 2 of the letter. The Absorbing SICAV and the Absorbed Fund are open to all subscribers. Subscription and redemption fees Absorbing SICAV Charges are to be paid by investors upon subscription or redemption Basis Rate scale Share Class RC Subscription fee not paid to the UCITS net asset value x number of shares 2% max Subscription fee paid to the UCITS net asset value x number of shares None Redemption fee not ...
Sample 1Sample 2Sample 3See All (8)
Other characteristics. All the other characteristics of the Issue and the Debentures are described in the Deed, which shall be executed by the Parties, pursuant to the draft attached hereto as Exhibit 2.2, on the Issue Date.
Sample 1Sample 2Sample 3See All (7)
Other characteristics. 1. Equivalent to completion of the 12th grade required; supplemental course work or training in environmental sciences.
Sample 1
Other characteristics. The software for interfacing with the management systems does not provide a user interface. How to install the software The software for interfacing with the management systems will be automatically installed with the Well-Contact Suite Basic Software (cod. 01590) or Well- Contact Suite Top Software (cod. 01591) Unless you activate the service-specific license, this component is non-operational. To activate the license you must follow the appropriate procedure described in License Activation. After properly installing the WCS software, so that it can be used with all its features, you need to perform the appropriate configuration described in the Chapter Configuration of the interfacing with management software. The configuration operations can be performed only by software users with high access privilege to the software. Software update The software for interfacing with the management systems will be automatically updated with the WCS Software. To update the software, proceed as described in the user manual of the WCS software installed. CONFIGURATION SECTION Introduction After properly installing the WCS software, so that it can be used with all its features, you need to perform the appropriate configuration. These operations are described in detail in the next few paragraphs. In the chapter Configuration of the interfacing with management software are described the generic operations that apply to all types of management software, while the next few chapters describe the operations to perform for each PMS compatible system. Configuration of the interfacing with management software Log on to the "General Interfacing Activation/Configuration" section from the menu "Settings" as described in Picture 1.
Sample 1
Other characteristics. Insulating material: Al. Porcelain Glaze: Light Xxxx Xxxxxxx n° 70 Metal parts assembled with Portland cement. Shed Profile 18° Ø6.3 (Ø160) R 0.19 (5) 1.77 (45) 10° Ø5.0 (Ø127) Bottom Flange View 4 Tapped Holes 5/8-11 UNC +0.015 Oversize Full Thread 0.87 (22) 1.77 (45) NOTE: TO PURCHASER ALL SALES OF GAMMA PRODUCTS ARE SUBJECT TO O U R S T A N D A R D T E R M S A N D C O N D I T I O N S A N D T H E L I M I T E D W A R R A N T I E S T H E R E U N D E R DWG. No.: H21289EJ DWG: TYPE SALES Date: 2015/07/01 DWN: X.XXXXX A. APP: X. XXXXXXXXX REVISION HISTORY DRAWING CREATED DATE 2016-04-06 Exhibit E in. (mm) PART NUMBER 278HU0350 REF. TR-278 TITLE HIGH STRENGTH POST TYPE INSULATOR TR-278 METAL CAP BOTH ENDS 4 TAPPED HOLES Ø5/8"-11NC +0.015 OVERSIZE 0.625 (16) MIN. Ø5 (127) MARK Ø5.25 (133) ANSI TR-278 NBA 350 kV 13.3 kN YEAR - DAY Ø9.1 (232) (762) NOTES
Sample 1
Other characteristics. In the case of all technical characteristics whose tolerances have not been defined above, slight differences cannot be grounds for complaint on the part of the Buyer so long as the Goods delivered are suitable for the use envisaged in the order. The waviness of paper and board is not a hidden vice. The Buyer of special makings must accept a paper or board which does not entirely match the specification in minor respects but which will meet the needs of the end-use specified, up to a maximum quantity of 10 % of the initial order.
Sample 1
AutoNDA by SimpleDocs

Related to Other characteristics

  • Characteristics The Initial Contracts have the following characteristics: (i) all the Contracts are secured by Motorcycles; (ii) no Initial Contract has a remaining maturity of more than 84 months; and (iii) the final scheduled payment on the Initial Contract with the latest maturity is due not later than June 2014. Approximately 77.89% of the Principal Balance of the Initial Contracts as of the Initial Cutoff Date is attributable to loans for purchases of new Motorcycles and approximately 22.11% is attributable to loans for purchases of used Motorcycles. No Initial Contract was originated after the Initial Cutoff Date. No Initial Contract has a Contract Rate less than 3.989%. The last scheduled payment date of the Contracts (including any Subsequent Contracts) is due not later than September 2014. Approximately 98.98% of the Principal Balance of the Initial Contracts as of the Initial Cutoff Date is attributable to loans to purchase Motorcycles manufactured by Harley-Davidson or Buell and approximately 1.02% of the Principal Balance of the Initial Contracts as of the Initial Cutoff Date is attributable to loans to purchase Motorcycles not manufactured by Harley-Davidson or Buell.

  • Individual Characteristics Each Receivable has the following individual characteristics as of the Cut-Off Date:

  • Mortgage Loan Characteristics The characteristics of the related Mortgage Loan Package are as set forth on the description of the pool characteristics for the applicable Mortgage Loan Package delivered pursuant to Section 11 on the related Closing Date in the form attached as Exhibit B to each related Assignment and Conveyance Agreement;

  • Characteristics of Receivables As of the Cut-Off Date (or such other date as may be specifically set forth below), each Receivable:

  • Environmental Conditions A Phase I environmental site assessment (or update of a previous Phase I and or Phase II environmental site assessment) and, with respect to certain Mortgage Loans, a Phase II environmental site assessment (collectively, an “ESA”) meeting ASTM requirements conducted by a reputable environmental consultant in connection with such Mortgage Loan within 12 months prior to its origination date (or an update of a previous ESA was prepared), and such ESA (i) did not identify the existence of Recognized Environmental Conditions (as such term is defined in ASTM E1527-05 or its successor, hereinafter “Environmental Condition”) at the related Mortgaged Property or the need for further investigation, or (ii) if the existence of an Environmental Condition or need for further investigation was indicated in any such ESA, then at least one of the following statements is true: (A) an amount reasonably estimated by a reputable environmental consultant to be sufficient to cover the estimated cost to cure any material noncompliance with applicable Environmental Laws or the Environmental Condition has been escrowed by the related Mortgagor and is held or controlled by the related lender; (B) if the only Environmental Condition relates to the presence of asbestos-containing materials, radon in indoor air, lead based paint or lead in drinking water, the only recommended action in the ESA is the institution of such a plan, an operations or maintenance plan has been required to be instituted by the related Mortgagor that can reasonably be expected to mitigate the identified risk; (C) the Environmental Condition identified in the related environmental report was remediated, abated or contained in all material respects prior to the date hereof, and, if and as appropriate, a no further action, completion or closure letter or its equivalent, was obtained from the applicable governmental regulatory authority (or the Environmental Condition affecting the related Mortgaged Property was otherwise listed by such governmental authority as “closed” or a reputable environmental consultant has concluded that no further action or investigation is required); (D) an environmental policy or a lender’s pollution legal liability insurance policy that covers liability for the Environmental Condition was obtained from an insurer rated no less than “A-” (or the equivalent) by Xxxxx’x, S&P and/or Fitch; (E) a party not related to the Mortgagor was identified as the responsible party for the Environmental Condition and such responsible party has financial resources reasonably estimated to be adequate to address the situation; or (F) a party related to the Mortgagor having financial resources reasonably estimated to be adequate to address the situation is required to take action. To Seller’s knowledge, except as set forth in the ESA, there is no Environmental Condition at the related Mortgaged Property.

  • Environmental Condition Except as set forth on Schedule 5.12 to the Information Certificate, (a) to each Loan Party’s knowledge, no properties or assets of any Loan Party or any of its Subsidiaries have ever been used by a Loan Party, its Subsidiaries, or by previous owners or operators in the disposal of, or to produce, store, handle, treat, release, or transport, any Hazardous Materials, where such disposal, production, storage, handling, treatment, release or transport was in violation, in any material respect, of any applicable Environmental Law, (b) to each Loan Party’s knowledge, after due inquiry, no Loan Party’s nor any of its Subsidiaries’ properties or assets have ever been designated or identified in any manner pursuant to any environmental protection statute as a Hazardous Materials disposal site, (c) no Loan Party nor any of its Subsidiaries has received notice that a Lien arising under any Environmental Law has attached to any revenues or to any Real Property owned or operated by a Loan Party or its Subsidiaries, and (d) no Loan Party nor any of its Subsidiaries nor any of their respective facilities or operations is subject to any outstanding written order, consent decree, or settlement agreement with any Person relating to any Environmental Law or Environmental Liability that, individually or in the aggregate, could reasonably be expected to result in a Material Adverse Change.

  • Location and Type of Mortgaged Property The Mortgaged Property is a fee simple property located in the state identified in the Mortgage Loan Schedule and consists of a single parcel of real property with a detached single family residence erected thereon, or a two- to four-family dwelling, or an individual residential condominium unit in a condominium project, or an individual unit in a planned unit development and that no residence or dwelling is a mobile home, provided, however, that any condominium unit or planned unit development shall not fall within any of the "Ineligible Projects" of part VIII, Section 102 of the Fannie Mae Selling Guide and shall conform with the Underwriting Guidelxxxx. Ix xhe case of any Mortgaged Properties that are manufactured homes (a "Manufactured Home Mortgage Loans"), (i) the related manufactured dwelling is permanently affixed to the land, (ii) the related manufactured dwelling and the related land are subject to a Mortgage properly filed in the appropriate public recording office and naming Seller as mortgagee, (iii) the applicable laws of the jurisdiction in which the related Mortgaged Property is located will deem the manufactured dwelling located on such Mortgaged Property to be a part of the real property on which such dwelling is located, and (iv) such Manufactured Home Mortgage Loan is (x) a qualified mortgage under Section 860G(a)(3) of the Internal Revenue Code of 1986, as amended and (y) secured by manufactured housing treated as a single family residence under Section 25(e)(10) of the Code. As of the date of origination, no portion of the Mortgaged Property was used for commercial purposes, and since the date of origination, no portion of the Mortgaged Property has been used for commercial purposes; provided, that Mortgaged Properties which contain a home office shall not be considered as being used for commercial purposes as long as the Mortgaged Property has not been altered for commercial purposes and is not storing any chemicals or raw materials other than those commonly used for homeowner repair, maintenance and/or household purposes;

  • Contamination The presence in, on or under land, air or water of a substance (whether a solid, liquid, gas, odour, heat, sound, vibration or radiation) at a concentration above the concentration at which the substance is normally present in, on or under land, air or water in the same locality, that presents a risk of Environmental Harm, including harm to human health or any other aspect of the Environment, or could otherwise give rise to a risk of non-compliance with any Statutory Requirement for the protection of the Environment.

Time is Money Join Law Insider Premium to draft better contracts faster.