Operation and Maintenance Training Sample Clauses

Operation and Maintenance Training. Prior to Material Completion, the Contractor shall furnish advance copies of proper written instructions to the Owner on operation and maintenance of all mechanical, electrical and other operating systems and equipment. The Contractor shall provide training in the operation and maintenance of all mechanical, electrical and other operating systems and equipment in the presence of the Design Professional to Owner and shall give notice in writing to the Design Professional and Owner at least fifteen (15) days prior to the date it is proposes for the training. The presence of a Commissioning Authority shall not diminish the responsibility of the Contractor to perform and administer this Operation and Maintenance Training.
Sample 1Sample 2Sample 3See All (36)
AutoNDA by SimpleDocs
Operation and Maintenance Training. A. Upon completion of the equipment installation and ten days before start-up, a qualified representative of the manufacturer shall be present for a minimum of three (3), eight (8) hour working days to instruct personnel in the operation and proper care of the equipment at each location.
Sample 1
Operation and Maintenance Training. Prior to Material Completion, the CM/GC shall furnish advance copies of proper written instructions to the Owner and Using Agency on operation and maintenance of all mechanical, electrical and other operating systems and equipment. The CM/GC shall provide training in the operation and maintenance of all mechanical, electrical and other operating systems and equipment in the presence of the Design Professional and Owner to the Using Agency and shall give notice in writing to the Design Professional, Owner and Using Agency at least fifteen
Sample 1
Operation and Maintenance Training. Consultant shall provide instruction to District’s staff in the design intent for operation of the equipment provided under this Project. This instruction will cover both the basic operational concept and actual operation and control of the systems and components under both normal and abnormal operations that are likely to occur. District will coordinate the services of qualified representatives from equipment manufacturers. Consultant shall conduct the following training sessions: overall project, biofilter, dry media scrubber, alum pumps (one session) and HES prior to startup. Consultant shall provide approximately ten training sessions, two for each training session topic, of up to two hours each and shall include design intent for operation and maintenance of the facility and SCADA training by District’s software contractor. Consultant shall provide up to four hours of follow-up training approximately six months after final completion.
Sample 1

Related to Operation and Maintenance Training

  • Operation and Maintenance 17.1 O&M obligations of the Concessionaire

  • Operation and Maintenance Manuals Receipts for transmittal of Operation and Maintenance Manuals, Brochures and Data to the Design Professional (or Commissioning Agent) as required by Section 6.1.1.5.

  • Installation and Maintenance Except for the bi‐directional and production metering equipment owned by the City, all equipment on Customer’s side of the delivery point, including the required disconnect device, shall be provided and maintained in satisfactory operating condition by Customer and shall remain the property and responsibility of the Customer. The City will bear no responsibility for the installation or maintenance of Customer’s equipment or for any damage to property as a result of any failure or malfunction thereof. The City shall not be liable, directly or indirectly for permitting or continuing to allow the interconnection of the Facility or for the acts or omissions of Customer or the failure or malfunction of any equipment of Customer that causes loss or injury, including death, to any party.

  • Operations and Maintenance Pursuant to Section 10.5 of this Agreement, Developer shall pay the reasonable expenses (including overheads) for the operation, maintenance, repair and replacement of Transmission Owner’s Attachment Facilities and incremental operating and maintenance expenses incurred in association with System Upgrade Facilities, if and to the extent provided for under Attachment S. For Transmission Owner’s Attachment Facilities, such expenses are calculated as follows:

  • Construction and Maintenance There are on-going maintenance, renovation and construction projects taking place in and around the residences. The work typically takes place during regular business hours, but may begin earlier or extend into evenings or weekends. On-going construction or renovation projects will continue through midterm and final exam periods. The University will take measures to ensure that prudent construction practices are followed, but there may be noise, dust and temporary interruption of some services. Residents may be required to temporarily or permanently relocate to facilitate construction or renovation to their residence area. There will be no compensation or reduction to your residence fees due to disruption and/or relocation.

  • Operating and Maintenance Manuals 58.1 If “as built” Drawings and/or operating and maintenance manuals are required, the Contractor shall supply them by the dates stated in the Contract Data.

  • Installation, Inspection, and Maintenance The Contractor is responsible for installation and maintenance of the BMPs as a part of its Bid. The Design Professional shall obtain the services of a qualified testing laboratory to inspect the BMPs in accordance with the permits, the costs of such inspections to be borne by the Owner. In the event of Abnormal Weather Conditions or force majeure, the Contractor shall be compensated for re-installation of BMPs at established Unit Prices.

  • Operating and Maintenance Costs The Participating Generator shall be responsible for all its costs incurred in connection with operating and maintaining the Generating Units identified in Schedule 1 for the purpose of meeting its obligations under this Agreement.

  • Operating and Maintenance Expenses Subject to the provisions herein addressing the use of facilities by others, and except for operations and maintenance expenses associated with modifications made for providing interconnection or transmission service to a third party and such third party pays for such expenses, the Interconnection Customer shall be responsible for all reasonable expenses including overheads, associated with: (1) owning, operating, maintaining, repairing, and replacing the Interconnection Customer’s Interconnection Facilities; and (2) operation, maintenance, repair and replacement of the Participating TO’s Interconnection Facilities.

  • Planned Maintenance (a) Sellers may designate up to twenty (20) Days of Planned Maintenance on Sellers’ Facilities during each Contract Year. Sellers shall be entitled to reduce (including down to zero (0)) its Gas scheduling under Clause 8 and Exhibit 3 for each Day of Planned Maintenance.

Time is Money Join Law Insider Premium to draft better contracts faster.