Normal Operating Capacity Sample Clauses

Normal Operating Capacity. At normal operation mode, except during start up and shut down, the generating units for each module should be capable of being operated as follows: - Primary turbine and : 3.3 MW per hour generator - LTT unit and generator : 2.7 MW per hour
AutoNDA by SimpleDocs
Normal Operating Capacity. The maximum MW output of a generator or group of generators under normal maximum head and flow conditions. • Pre-Application Document (PAD) – a document, representing a collection of documents as compiled into a single unit, containing detailed information on a hydroelectric project; the document is used to describe the project and its resources and to start the applicant’s consultation process with resource agencies and the public. • Project – One or more hydroelectric plants collectively included in a single license issued by the FERC. A Project typically consists of a dam or dams, reservoir(s), powerhouse(s), and appurtenant facilities. As used in this document, the capitalized term “Project” refers specifically to the Xxxx Hydroelectric Project (FERC Project No. 1894).

Related to Normal Operating Capacity

  • Lawful Operations, etc Each Credit Party and each of its Subsidiaries: (i) holds all necessary foreign, federal, state, provincial, local and other governmental licenses, registrations, certifications, permits and authorizations necessary to conduct its business and own its properties; and (ii) is in full compliance with all requirements imposed by law, regulation or rule, whether foreign, federal, state or local, that are applicable to it, its operations, or its properties and assets, including, without limitation, applicable requirements of Environmental Laws, except for any failure to obtain and maintain in effect, or noncompliance that, individually or in the aggregate, could not reasonably be expected to have a Material Adverse Effect.

  • Total Operating Expenses All costs and expenses paid or incurred by the Company, as determined under GAAP, that are in any way related to the operation of the Company or its business, including the Advisory Fee, but excluding (i) the expenses of raising capital such as Organization and Offering Expenses, legal, audit, accounting, underwriting, brokerage, listing, registration, and other fees, printing and other such expenses and taxes incurred in connection with the issuance, distribution, transfer and registration of securities, (ii) interest payments, (iii) taxes, (iv) non-cash expenditures such as depreciation, amortization and bad debt reserves, (v) incentive fees paid in compliance with the NASAA REIT Guidelines; (vi) acquisition fees and Acquisition Expenses, (vii) real estate commissions on the sale of Real Property, and (viii) other fees and expenses connected with the acquisition, disposition, management and ownership of real estate interests, mortgages or other property (including the costs of foreclosure, insurance premiums, legal services, maintenance, repair, and improvement of property). The definition of “Total Operating Expenses” set forth above is intended to encompass only those expenses which are required to be treated as Total Operating Expenses under the NASAA REIT Guidelines. As a result, and notwithstanding the definition set forth above, any expense of the Company which is not part of Total Operating Expenses under the NASAA REIT Guidelines shall not be treated as part of Total Operating Expenses for purposes hereof. 2%/25% Guidelines. 2%/25% Guidelines shall have the meaning set forth in Section 13.

  • Floor Loading Floor loading capacity shall be within building design capacity. Tenant may exceed floor loading capacity with Landlord’s consent, at Landlord’s sole discretion and must, at Tenant’s sole cost and expense, reinforce the floor as required for such excess loading.

  • Substantial Completion “Substantial Completion” means the stage in the progress of the Work when the Work, or designated portions thereof, may still require minor modifications or adjustments but, in the Owner’s opinion, the Work has progressed to the point such that all parts of the Work under consideration are fully operational and usable for intended purposes, as evidenced by a Certificate of Substantial Completion approved by the Owner. If a Certificate of Occupancy is required by public authorities having jurisdiction over the Work, said certificate shall be issued before the Work or any portion thereof is considered substantially complete. When the Contractor considers that the Work, or a portion thereof which the Owner agrees to accept separately, is substantially complete, the Contractor shall notify Owner’s Designated Representative (sometimes referred to as the “ODR”) and request a determination as to whether the Work or designated portion thereof is substantially complete. If the ODR does not consider the Work substantially complete, the ODR will notify the Contractor giving reasons therefore. Failure on the Owner’s part to list a reason does not alter the responsibility of the Contractor to complete all Work in accordance with the terms of this Agreement. After satisfactorily completing items identified by Owner’s Designated Representative, the Contractor shall then submit another request for the ODR to determine Substantial Completion. If The ODR considers the Work substantially complete, The ODR will prepare and deliver a certificate of Substantial Completion which shall establish the date of Substantial Completion, shall include a punch list of items to be completed or corrected before final completion and final payment, shall establish the time within which the Contractor shall finish the punch list, and shall establish responsibilities of the Owner and the Contractor for security, maintenance, heat, utilities, damage to the Work, warranty and insurance. Failure to include an item on the punch list does not alter the responsibility of the Contractor to complete all Work in accordance with the terms and conditions of this Agreement. The certificate of Substantial Completion shall be signed by the Owner and the Contractor to evidence acceptance of the responsibilities assigned to them in such certificate. Substantial Completion (as defined in this agreement) for all stages of the Work shall be achieved on or before the following Substantial Completion date: DATE FOR SUBSTANTIAL COMPLETION: TBD Under no circumstances will the time for Substantial Completion exceed this date without a written amendment to this Agreement. THE TIMES SET FORTH IN THE CONSTRUCTION DOCUMENTS ARE AN ESSENTIAL ELEMENT OF THE AGREEMENT. TIME LIMITS STATED IN THE CONTRACT DOCUMENTS ARE OF THE ESSENCE OF THIS AGREEMENT.

  • Continued Operations Continue at all times to conduct its business and engage principally in the same line or lines of business substantially as heretofore conducted.

  • Floor Load Tenant shall not place a load upon any floor of the Premises that exceeds 50 pounds per square foot “live load”. Landlord reserves the right to reasonably designate the position of all Equipment which Tenant wishes to place within the Premises, and to place limitations on the weight thereof.

  • Debt Service Coverage The Company will not, and will not permit any Subsidiary to, incur any Debt (including, without limitation, Acquired Debt) other than Intercompany Debt, if the ratio of Consolidated Income Available for Debt Service to the Annual Debt Service Charge for the period consisting of the four consecutive fiscal quarters most recently ended prior to the date on which such additional Debt is to be incurred is less than 1.5 to 1.0, on a pro forma basis after giving effect to the incurrence of such Debt and the application of the proceeds therefrom, and calculated on the assumption that (i) such Debt and any other Debt (including, without limitation, Acquired Debt) incurred by the Company or any of its Subsidiaries since the first day of such four-quarter period and the application of the proceeds therefrom (including to refinance other Debt since the first day of such four-quarter period) had occurred on the first day of such period, (ii) the repayment or retirement of any other Debt of the Company or any of its Subsidiaries since the first day of such four-quarter period had occurred on the first day of such period (except that, in making such computation, the amount of Debt under any revolving credit facility, line of credit or similar facility shall be computed based upon the average daily balance of such Debt during such period), and (iii) in the case of any acquisition or disposition by the Company or any Subsidiary of any asset or group of assets since the first day of such four-quarter period, including, without limitation, by merger, stock purchase or sale, or asset purchase or sale or otherwise, such acquisition or disposition had occurred on the first day of such period with the appropriate adjustments with respect to such acquisition or disposition being included in such pro forma calculation. If the Debt giving rise to the need to make the foregoing calculation or any other Debt incurred after the first day of the relevant four-quarter period bears interest at a floating rate then, for purposes of calculating the Annual Debt Service Charge, the interest rate on such Debt shall be computed on a pro forma basis as if the average interest rate which would have been in effect during the entire such four-quarter period had been the applicable rate for the entire such period.

  • Maintenance and Operation Member-Generator agrees to maintain their system and facilities in accordance with applicable manufacturer's recommended maintenance schedule and standard prudent engineering practices. Member-Generator covenants and agrees to operate their system, facilities and equipment so as to minimize the likelihood for a malfunction or other disturbance, damaging or otherwise affecting or impairing Cooperative’s electrical system. Member-Generator shall comply with all applicable laws, regulations, zoning, building codes, safety rules and other environmental regulations or restrictions applicable to the design, installation, operation and maintenance of the Member-Generator's System. Member-Generator must, at least once every year, conduct a test to confirm that Member-Generator’s System automatically ceases to energize the output (interconnection equipment output voltage goes to zero) within two (2) seconds of being disconnected from Cooperative’s electrical system. Disconnecting the Member-Generator’s System from Cooperative’s electrical system at the visible disconnect switch and measuring the time required for the unit to cease to energize the output shall satisfy this test. Member-Generator shall maintain a record of the results of these tests and, upon request by Cooperative, shall provide a copy of the test results to Cooperative. If Member-Generator is unable to provide a copy of the test results upon request, Cooperative shall notify Member- Generator by mail that Member-Generator has thirty (30) days from the date Member-Generator receives the request to provide Cooperative with the results of a test. If Member-Generator does not provide Cooperative with the test results within the thirty (30) day time period or if the test results provided to Cooperative show that Member-Generator’s net metering unit is not functioning correctly, Cooperative may immediately disconnect Member-Generator’s System from Cooperative’s electrical system. If Member-Generator’s equipment ever fails this test, Member-Generator shall immediately disconnect Member-Generator’s System from Cooperative's electrical system. Member-Generator’s System shall not be reconnected to Cooperative's electrical system by the Member-Generator until Member-Generator’s System is repaired and operating in a normal and safe manner. Cooperative shall have the right to have a representative present and informed when any such tests are conducted. Cooperative does not warrant the testing procedures or results by the presence of its representative. Member-Generator is responsible for protecting their equipment from transient high voltage spikes caused by lightning and/or transient low voltage conditions caused by faults or short circuits, and from any other causes or events. Therefore, Cooperative shall not be responsible for damage to Member-Generator’s equipment allegedly caused by transient high voltage spikes caused by lightning and/or transient low voltage conditions caused by faults or short circuits or other causes or events. Member-Generator agrees to notify Cooperative no less than thirty (30) days prior to modification of the components or design of the Member-Generator’s System that in any way may degrade or significantly alter the System’s output characteristics. Member-Generator acknowledges that any such modifications will require submission of a new Application and Agreement to Cooperative.

  • Minimum Debt Service Coverage The Borrower will not at any time permit the outstanding principal amount of the Unsecured Indebtedness to exceed an amount such that: (a) the Unencumbered Net Operating Income, divided by (b) Pro Forma Unsecured Debt Service Charges would be less than 1.5 for any Fiscal Quarter.

Time is Money Join Law Insider Premium to draft better contracts faster.