Naltrexone Sample Clauses

Naltrexone. Naltrexone is taken once a day or three times a week as a pill or as a once-a-month injection called Vivitrol. Although it can have some side effects, they tend to be mild and are rarely dangerous. Naltrexone can be prescribed by any physician or trained medical provider and does not require a special clinic or program. It can reduce cravings for opioids and blocks the effects of opioids on the brain, which can stop a person from getting “high.” However, it does not reduce withdrawal symptoms. You must first stop taking all opioids for at least 7 to 10 days before you can start taking naltrexone or you will experience severe withdrawal discomfort. You should not take naltrexone if you are taking lawfully prescribed opioid medication for pain or other medical problems. Your doctor or medical provider will talk with you about whether naltrexone or Vivitrol may be the right medication for you. Preventing or Reversing Overdose You should also know about another medicine called naloxone or Narcan. Narcan is not used to treat opioid use disorders but is used in case of an emergency to stop an overdose on opioids. It can be given as a shot by trained professionals or squirted into the nose by people without medical training who have been shown how to use it. Most cities or states have laws allowing people to keep naloxone with them and use it in case of an emergency. Check with the treatment court or your treatment provider about receiving training in using naloxone and getting a naloxone kit. [OPTIONAL IF APPLICABLE: The Treatment Court offers training in how to use Narcan to save another person’s life and provides free kits that you and your loved ones can keep with you and use in the event of a life-threatening overdose emergency.] Can I Take MOUD While Enrolled in Treatment Court? The Treatment Court is committed to providing safe and effective treatments for opioid use disorders while also protecting your welfare, the welfare of other participants, and public safety. Therefore, you are allowed to take MOUD when it is approved by the treatment court team and prescribed legally by a physician or other medical provider who has personally examined you and will continue to meet with you to see how you are doing. Whether or not you take MOUD, you will receive all of the same treatment and other services as other people in the program and will get the same benefits from graduating. Choosing whether or not to use MOUD, which medication to use, and the safest and bes...
AutoNDA by SimpleDocs
Naltrexone. For the treatment of alcohol use disorder AND in combination with behavioural intervention therapy (i.e., psychosocial counselling) as necessary. Approval period: 3 months Acamprosate: For the maintenance of abstinence in patients who have been abstinent from alcohol for at least four days OR for the treatment of alcohol use disorder for patients who have contraindications to naltrexone (i.e., concurrent opioid use, acute hepatitis, or liver failure) AND in combination with behavioural intervention therapy (i.e., psychosocial counselling) as necessary. Approval period: 3 months Terms of the Agreement: PSD reserves the right to: Implement Collaborative Prescribing Agreements for PharmaCare coverage; require renewals of such Agreements; and, as necessary, conduct quality assurance checks of such processes. For quality assurance purposes, the physician with a valid exemption agrees to receive feedback on his/ her prescribing of naltrexone or acamprosate, such as de-personalized, aggregate prescribing data. Patients whose prescriptions for naltrexone or acamprosate are written by a prescriber who has entered into a Collaborative Prescribing Agreement will receive automatic coverage for their subsequent claim. PharmaCare coverage is not retroactive. A current valid Agreement must be in place before a patient fills a prescription. PharmaCare coverage for naltrexone or acamprosate is only available with a valid Collaborative Prescribing Agreement. For any patient who does not meet the terms of this Agreement, a prescriber who has entered into a Collaborative Prescribing Agreement must write the following instruction to pharmacists on the prescription “Submit as zero cost to PharmaCare,” indicating that these prescriptions are not to be covered by PharmaCare. A physician’s exemption may be discontinued if the exempted physician prescribes naltrexone or acamprosate in a manner inconsistent with the terms of this Agreement. Name of prescriber (please print) College of Physicians & Surgeons ID Number Prescriber signature Medical Services Plan Billing Number Date submitted Fax # (to which confirmation of exemption should be sent) FAX COMPLETED AGREEMENT TO HEALTH INSURANCE BC at 0-000-000-0000 A copy of this Agreement will be kept on file at the Ministry of Health. PSD Use Only:
Naltrexone. Naltrexone, its physiologically active salts, derivatives, precursors or other chemical form of naltrexone which provides the physiological activity of naltrexone. THE PROJECT
Naltrexone. Please complete the following details: Patient’s name, address, date of birth Consultant’s contact details (p.3) And send One copy to:

Related to Naltrexone

  • API If the Software offers integration capabilities via an API, your use of the API may be subject to additional costs or Sage specific policies and terms and conditions (which shall prevail in relation to your use of the API). You may not access or use the API in any way that could cause damage to us or the Software, or in contravention of any applicable laws. We reserve the right in our sole discretion, to: (i) update any API from time to time; (ii) place limitations around your use of any API; and (iii) deny you access to any API in the event of misuse by you or to otherwise protect our legitimate interests.

  • Manufacture 2.1. The LED(s) on the LED module shall be equipped with suitable fixation elements.

  • Product ACCEPTANCE Unless otherwise provided by mutual agreement of the Authorized User and the Contractor, Authorized User(s) shall have thirty (30) days from the date of delivery to accept hardware products and sixty (60) days from the date of delivery to accept all other Product. Where the Contractor is responsible for installation, acceptance shall be from completion of installation. Failure to provide notice of acceptance or rejection or a deficiency statement to the Contractor by the end of the period provided for under this clause constitutes acceptance by the Authorized User(s) as of the expiration of that period. The License Term shall be extended by the time periods allowed for trial use, testing and acceptance unless the Commissioner or Authorized User agrees to accept the Product at completion of trial use. Unless otherwise provided by mutual agreement of the Authorized User and the Contractor, Authorized User shall have the option to run testing on the Product prior to acceptance, such tests and data sets to be specified by User. Where using its own data or tests, Authorized User must have the tests or representative set of data available upon delivery. This demonstration will take the form of a documented installation test, capable of observation by the Authorized User, and shall be made part of the Contractor’s standard documentation. The test data shall remain accessible to the Authorized User after completion of the test. In the event that the documented installation test cannot be completed successfully within the specified acceptance period, and the Contractor or Product is responsible for the delay, Authorized User shall have the option to cancel the order in whole or in part, or to extend the testing period for an additional thirty (30) day increment. Authorized User shall notify Contractor of acceptance upon successful completion of the documented installation test. Such cancellation shall not give rise to any cause of action against the Authorized User for damages, loss of profits, expenses, or other remuneration of any kind. If the Authorized User elects to provide a deficiency statement specifying how the Product fails to meet the specifications within the testing period, Contractor shall have thirty (30) days to correct the deficiency, and the Authorized User shall have an additional sixty (60) days to evaluate the Product as provided herein. If the Product does not meet the specifications at the end of the extended testing period, Authorized User, upon prior written notice to Contractor, may then reject the Product and return all defective Product to Contractor, and Contractor shall refund any monies paid by the Authorized User to Contractor therefor. Costs and liabilities associated with a failure of the Product to perform in accordance with the functionality tests or product specifications during the acceptance period shall be borne fully by Contractor to the extent that said costs or liabilities shall not have been caused by negligent or willful acts or omissions of the Authorized User’s agents or employees. Said costs shall be limited to the amounts set forth in the Limitation of Liability Clause for any liability for costs incurred at the direction or recommendation of Contractor.

  • Labeling Upon request, Lessee will xxxx the Equipment indicating Lessor's interest with labels provided by Lessor. Lessee will keep all Equipment free from any other marking or labeling which might be interpreted as a claim of ownership.

  • Manufacturing Technology Transfer With respect to each Technology Transfer Product, upon AbbVie’s written request after the Inclusion Date for the Included Target to which such Technology Transfer Product is Directed, Morphic shall effect a full transfer to AbbVie or its designee (which designee may be an Affiliate or a Third Party manufacturer) of all Morphic Know-How and Joint Know-How relating to the then-current process for the Manufacture of such Technology Transfer Product (the “Manufacturing Process”) and to implement the Manufacturing Process at facilities designated by AbbVie (such transfer and implementation, as more fully described in this Section 5.3, the “Manufacturing Technology Transfer”). To assist with the Manufacturing Technology Transfer, Morphic will make its personnel reasonably available to AbbVie during normal business hours for up to [***] FTE hours with respect to each Included Target (in each case, free of charge to AbbVie) to transfer and implement the Manufacturing Process under this Section 5.3. Thereafter, if requested by AbbVie, Morphic shall continue to perform such obligations; provided, that AbbVie will reimburse Morphic for its full-time equivalent (FTE) costs (for clarity, in excess of [***] FTE hours) and any reasonable and verifiable out-of-pocket costs incurred in providing such assistance. CERTAIN CONFIDENTIAL INFORMATION CONTAINED IN THIS DOCUMENT, MARKED BY [***], HAS BEEN OMITTED BECAUSE IT IS NOT MATERIAL AND WOULD LIKELY CAUSE COMPETITIVE HARM TO THE COMPANY IF PUBLICLY DISCLOSED.

  • Licensed Product “Licensed Product” shall mean any article, composition, apparatus, substance, chemical material, method, process or service whose manufacture, use, or sale is covered or claimed by a Valid Claim within the Patent Rights. For clarity, a “Licensed Product” shall not include other product or material that (a) is used in combination with Licensed Product, and (b) does not constitute an article, composition, apparatus, substance, chemical material, method, process or service whose manufacture, use, or sale is covered or claimed by a Valid Claim within the Patent Rights.

  • Manufacturing (a) The Supplier shall without limitation be responsible, at no additional cost to the Purchaser, for: sourcing and procuring all raw materials for the Products; obtaining all necessary approvals, permits and licenses for the manufacturing of the Products; providing sufficient qualified staff and workers to perform the obligations under this Purchase Agreement; implementing and maintaining effective inventory and production control procedures with respect to the Products; and handling other matters as reasonably requested by the Purchaser from time to time.

  • Commercialization Intrexon shall have the right to develop and Commercialize the Reverted Products itself or with one or more Third Parties, and shall have the right, without obligation to Fibrocell, to take any such actions in connection with such activities as Intrexon (or its designee), at its discretion, deems appropriate.

  • Product Testing Upon request, Customer shall provide Operator a laboratory report for each Product delivery by Customer or Customer’s supplier. Operator will not be obligated to receive Contaminated Product for throughput across the Berths, nor will Operator be obligated to accept Product that fails to meet the quality specifications set forth in the arrival notice.

  • Licensed Products Lessee will obtain no title to Licensed Products which will at all times remain the property of the owner of the Licensed Products. A license from the owner may be required and it is Lessee's responsibility to obtain any required license before the use of the Licensed Products. Lessee agrees to treat the Licensed Products as confidential information of the owner, to observe all copyright restrictions, and not to reproduce or sell the Licensed Products.

Time is Money Join Law Insider Premium to draft better contracts faster.