Modifications in Specifications Sample Clauses

Modifications in Specifications. Encap shall not amend the Specifications without the prior consent of Customer. All Specifications and any changes thereto agreed to by the Parties from time to time shall be in writing, dated and signed by the Parties. No change in the Specifications shall be implemented by Encap, whether requested by Customer or requested or required by any Regulatory Authority, until the Parties have agreed in writing to such change, the implementation date of such change, and any increase or decrease in costs, expenses or fees associated with such change. Encap shall respond promptly, and in any event within [***] business days, to any request made by Customer for a change in the Specifications, and both Parties shall use commercially reasonable, good faith efforts to agree to the terms of such change in a timely manner. As soon as possible after a request is made for any change in Specifications, Encap shall notify Customer of the costs, if any, associated with implementing such change and shall provide such supporting documentation as Customer may reasonably require. Customer shall pay any such costs associated with implementing such agreed upon changes unless such changes are due to processes or procedures of Encap. PORTIONS OF THIS EXHIBIT WERE OMITTED AND HAVE BEEN FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE COMMISSION PURSUANT TO AN APPLICATION FOR CONFIDENTIAL TREATMENT UNDER RULE 24B-2 OF THE SECURITIES EXCHANGE ACT; [***] DENOTES OMISSIONS.
Sample 1Sample 2
AutoNDA by SimpleDocs
Modifications in Specifications. Neither Party shall make any revisions to the Specifications, manufacturing processes or Product Materials of a Product without the prior written consent of the other Party, such consent not to be unreasonably withheld. All costs for any and all revisions to the Specifications (including any additional Product or procurement costs) shall be borne by the Customer and shall be mutually agreed in writing by the Parties.
Sample 1Sample 2
Modifications in Specifications. (a) Gilead shall not make any revisions to the Specifications without the prior written consent of Eyetech.
Sample 1Sample 2
Modifications in Specifications. (a) COMPANY will not make any changes to its process, Raw Materials, supply sources, manufacturing locations or Facilities (where to do so would impact the Product(s)) for PFIZER without prior written consent of PFIZER which shall not be unreasonably withheld or delayed. This includes any changes made that may need notification to regulatory authorities by PFIZER. Any proposed changes that could fall into the categories above, will be discussed with PFIZER.
Sample 1
Modifications in Specifications. Any changes to the Specifications shall be agreed between the Parties in writing. Costs for amendments to the Specifications (including without limitation any additional Product or procurement costs) [***].
Sample 1
Modifications in Specifications. Company shall not make any revisions to the Specifications without the written consent of Purchaser. Costs for revisions to the Specifications (including any additional Product or procurement costs) agreed to by the Parties shall be borne by the Purchaser.
Sample 1
Modifications in Specifications. HII reserves the right to modify the specifications at any time without prior notice to Vendor. Upon receipt of such modifications to the specifications, Vendor shall promptly quote time and cost estimates for making changes in the System Software to reflect such changes. Upon receipt of written approval of HII, Vendor shall diligently develop the capabilities for implementing the modifications and shall make such modifications to the System Software to HII's satisfaction within a reasonable amount of time after receiving notification of the modifications to the specifications. If such modifications require changes in Vendor's interface or other software, equipment, or system architecture, all such changes shall be Vendor's sole responsibility and shall be at Vendor's sole cost and expense; provided, however, HII shall provide up to five (5) qualified software developers to Vendor to be directed by Vendor in making such modifications and HII shall pay for the cost of distribution of the modified software; and provided further, that if additional equipment or third party software is necessary at Hotels to accommodate the modifications, Vendor shall not be responsible for the cost of such equipment or software.
Sample 1
AutoNDA by SimpleDocs

Related to Modifications in Specifications

  • Modifications in Writing 19. No change, modification, extension, termination or waiver of this Agreement, or any of the provisions herein contained, shall be valid unless made in writing and signed by a duly authorized representative of each party.

  • Software Modifications Company may request that BNYM, at Company’s expense, develop modifications to the software constituting a part of the Licensed System that BNYM generally makes available to customers for modification (“Software”) that are required to adapt the Software for Company’s unique business requirements. Such requests, containing the material features and functionalities of all such modifications in reasonable detail, will be submitted by Company in writing to BNYM in accordance with the applicable, commercially reasonable procedures maintained by BNYM at the time of the request. Company shall be solely responsible for preparing, reviewing and verifying the accuracy and completeness of the business specifications and requirements relied upon by BNYM to estimate, design and develop such modifications to the Software. BNYM shall have no obligation to develop modifications to the Licensed System requested by Company, but may in its discretion agree to develop requested modifications which it, in its sole discretion, reasonably determines it can accomplish with existing resources or with readily obtainable resources without disruption of normal business operations provided Company agrees at such time in writing to pay all costs and expenses, including out-of-pocket expenses, associated with the customized modification. BNYM shall be obligated to develop modifications under this Section 2.16 only upon the execution of and in accordance with a writing containing, to BNYM’s reasonable satisfaction, all necessary business and technical terms, specifications and requirements for the modification as determined by BNYM in its sole judgment (“Customization Order”) and Company’s agreement to pay all costs and expenses, including out-of-pocket expenses, associated with the customized modification (“Customization Fee Agreement”). All modifications developed and incorporated into the Licensed System pursuant to a Customization Order are referred to herein as “Company Modifications”. BNYM may make Company Modifications available to all users of the Licensed System, including BNYM, at any time after implementation of the particular Company Modification and any entitlement of Company to reimbursement on account of such action must be contained in the Customization Fee Agreement.

  • Alterations, Modifications and Additions The Owner shall, or shall cause a Permitted Lessee to, make (or cause to be made) alterations and modifications in and additions to the Aircraft, Airframe and each Engine as may be required to be made from time to time to meet the applicable standards of the FAA or other Aviation Authority having jurisdiction over the operation of the Aircraft, to the extent made mandatory in respect of the Aircraft (a “Mandatory Modification”); except for (i) immaterial and non-recurring violations with respect to which corrective measures are being taken promptly by Owner or a Permitted Lessee and (ii) any law, rule, regulation or order the validity or application of which is being contested in good faith by the Owner or any Permitted Lessee in any reasonable manner which does not materially adversely affect the Indenture Trustee’s interest in the Aircraft, does not impair the Indenture Trustee’s security interest or International Interest in the Aircraft and does not involve any material risk of sale, forfeiture or loss of the Aircraft or the interest of the Indenture Trustee therein or any material risk of material civil penalty or any material risk of criminal liability being imposed on the Indenture Trustee or the holder of any Equipment Note. In addition, the Owner, at its own expense, may, or may permit a Permitted Lessee at its own cost and expense to, from time to time make or cause to be made such alterations and modifications in and additions to the Airframe or any Engine (each an “Optional Modification”) as the Owner or such Permitted Lessee may deem desirable in the proper conduct of its business including, without limitation, removal of Parts which the Owner deems are obsolete or no longer suitable or appropriate for use in the Aircraft, Airframe or such Engine; provided, however, that no such Optional Modification shall (i) materially diminish the fair market value, utility, or useful life of the Aircraft or any Engine below its fair market value, utility or useful life immediately prior to such Optional Modification (assuming the Aircraft or such Engine was in the condition required by this Trust Indenture immediately prior to such Optional Modification) or (ii) cause the Aircraft to cease to have the applicable standard certificate of airworthiness except that such certificate of airworthiness temporarily may be replaced by an experimental certificate during the process of implementing and testing such Optional Modification and securing related FAA re-certification of the Aircraft. For the avoidance of doubt, Owner may make alterations in the passenger configuration of the Aircraft and such alterations shall not constitute an Optional Modification. All Parts incorporated or installed in or attached to any Airframe or any Engine as the result of any alteration, modification or addition effected by the Owner shall be free and clear of any Liens except Permitted Liens and become subject to the Lien of this Trust Indenture; provided that the Owner or any Permitted Lessee may, at any time so long as the Airframe or any Engine is subject to the Lien of this Trust Indenture, remove any such Part (such Part being referred to herein as a “Removable Part”) from such Airframe or an Engine if (i) such Part is in addition to, and not in replacement of or in substitution for, any Part originally incorporated or installed in or attached to such Airframe or any Engine at the time of delivery thereof hereunder or any Part in replacement of, or in substitution for, any such original Part, (ii) such Part is not required to be incorporated or installed in or attached or added to such Airframe or any Engine pursuant to the terms of Section 4.02(d) or the first sentence of this Section 4.04(d) and (iii) such Part can be removed from such Airframe or any Engine without materially diminishing the fair market value, utility or remaining useful life which such Airframe or any Engine would have had at the time of removal had such removal not been effected by the Owner, assuming the Aircraft was otherwise maintained in the condition required by this Trust Indenture and such Removable Part had not been incorporated or installed in or attached to the Aircraft, Airframe or such Engine. Upon the removal by the Owner of any such Part as above provided in this Section 4.04(d), title thereto shall, without further act, be free and clear of all rights of the Indenture Trustee and such Part shall no longer be deemed a Part hereunder. Removable Parts may be leased from or financed by third parties other than the Indenture Trustee. Notwithstanding any other provision of this Indenture, Owner may, at any time, install or permit to be installed in the Aircraft Passenger Convenience Equipment owned by Owner or any Permitted Lessee or by third parties and leased or otherwise furnished to Owner in the ordinary course of business (including pursuant to a conditional sale contract, a licence or otherwise), and Owner may remove (and not replace) or permit to be removed (and not replaced) the same, and Indenture Trustee shall not acquire a Lien thereon by virtue of such installation or otherwise, and the rights of the owners therein shall not constitute a default under this Trust Indenture, it being acknowledged and agreed, however, that in no event shall the installation of any such Passenger Convenience Equipment impair or otherwise affect the rights and remedies of the Indenture Trustee hereunder and under applicable law.

  • Modifications; Waivers This Agreement may not be changed, modified or terminated, nor may any provision hereof be waived, except by a writing signed by the party to be charged with any such change, modification, termination or waiver. The waiver of any of the terms and conditions of this Agreement on any occasion or occasions shall not be deemed a waiver of such terms and conditions on any future occasion.

  • Amendments; Modifications This Agreement may not be modified, altered or amended except by an agreement in writing executed by all of the parties hereto.

  • Modifications This Agreement shall not be modified, cancelled or terminated except by an instrument in writing signed by each Note Holder. Additionally, for as long as any Note is contained in a Securitization Trust, the Note Holders shall not amend or modify this Agreement without first obtaining a Rating Agency Confirmation from each Rating Agency then rating any Certificates of any Securitization; provided that no such Rating Agency Confirmation shall be required in connection with a modification (i) to cure any ambiguity, to correct or supplement any provisions herein that may be defective or inconsistent with any other provisions herein or with the Lead Securitization Servicing Agreement, or (ii) with respect to matters or questions arising under this Agreement, to make provisions of this Agreement consistent with other provisions of this Agreement (including, without limitation, in connection with the creation of New Notes pursuant to Section 32).

  • Written Modifications This Agreement may be amended, modified, extended or terminated, and the provisions hereof may be waived, only by an agreement in writing signed by the Company and the Stockholders that hold a majority of the Shares held by all Stockholders: provided, however, that any amendment, modification, extension, termination or waiver (an “Amendment”) shall also require the consent of any Stockholder who would be disproportionately and adversely affected thereby. Each such Amendment shall be binding upon each party hereto and each holder of Shares subject hereto. In addition, each party hereto and each holder of Shares subject hereto may waive any right hereunder by an instrument in writing signed by such party or holder.

  • Waivers; Modifications Except as set forth in a written instrument included in the related Mortgage File, the (A) material terms of the related Mortgage Note, the related Mortgage(s) and any related loan agreement and/or lock-box agreement have not been waived, modified, altered, satisfied, impaired, canceled, subordinated or rescinded by the mortgagee in any manner, and (B) no portion of a related Mortgaged Property has been released from the lien of the related Mortgage, in the case of (A) and/or (B), to an extent or in a manner that in any such event materially interferes with the security intended to be provided by such document or instrument. Schedule I identifies each Mortgage Loan (if any) as to which, since the latest date any related due diligence materials were delivered to American Capital Strategies Ltd. (or its designee), there has been (in writing) given, made or consented to a material alteration, material modification or assumption of the terms of the related Mortgage Note, Mortgage(s) or any related loan agreement and/or lock-box agreement and/or as to which, since such date, there has been (in writing) a waiver other than as related to routine operational matters or minor covenants.

  • Modifications, Amendments or Waivers With the written consent of the Required Lenders, the Administrative Agent, acting on behalf of all the Lenders, and the Borrower, on behalf of the Loan Parties, may from time to time enter into written agreements amending or changing any provision of this Agreement or any other Loan Document or the rights of the Lenders or the Loan Parties hereunder or thereunder, or may grant written waivers or consents hereunder or thereunder. Any such agreement, waiver or consent made with such written consent shall be effective to bind all the Lenders and the Loan Parties; provided, that no such agreement, waiver or consent may be made which will:

  • Modifications and Amendments The terms and provisions of this Agreement may be modified or amended only by written agreement executed by all parties hereto.

Time is Money Join Law Insider Premium to draft better contracts faster.