Marine Facilities Sample Clauses

Marine Facilities. The Vessels shall operate in compliance with any and all regulations, including operating, pollution abatement and safety regulations of the operator or governing regulatory bodies of any marine terminal facility, wharf, berth or dock for which the Vessels are nominated by Shipper to load or discharge Cargo hereunder, including when the Vessels are approaching, alongside or departing said facility, wharf, berth or dock. Should the Vessel fail to comply with such rules and regulations or should the terminal representative determine that an unsafe condition exists with respect to the Vessels or either of them, the terminal representative shall have the right to order the Vessels to immediately cease loading or unloading operations and leave the place of mooring. Any and all time lost as a result of such Vessel non-compliance shall not count as used laytime or as demurrage if the Vessels are on demurrage, and all costs and expenses that arise as a result of such non-compliance shall be for the sole account of Carrier.
Sample 1Sample 2
AutoNDA by SimpleDocs
Marine Facilities. Loading Berth - Phase 1 - Excavation and Dredging Breakdown - Sheet 1 of 3 26089-200-R0-0000-10211 00B
Sample 1Sample 2
Marine Facilities. The marine facilities include: • LNG Loading Berth: one south Berth capable of berthing tankers from 125,000 m3 to 266,000 m3 (QMAX) capacity, with a design loading rate of 12,000 m3/hr. • Access trestle supporting a pipe rack and roadway providing access to the berths • Material Offloading Facility (MOF) consisting of a quayside structure to import Equipment and Contractor Equipment during performance of the Work • Contractor shall construct at least one Pioneer Dock; if Contractor elects to construct additional pioneer docks, it shall do so at its own cost and in compliance with all Owner Permits. • Ship turning basin and LNG berthing basin, including navigational aids and dredging including pre-turnover dredging of shoaling and maintenance dredging. The dredging depth shall be defined as what is outlined in the Specification for “Dredging Works, Marine Facilities Design Criteria for LNG Loading Berths” and “Marine Facilities Design Criteria for Material Offloading Facility” as referenced in Appendix B. • Shore protection at the Berth pocket, MOF dredging slope and turning basin east bank slope.
Sample 1
Marine Facilities. The marine facilities include a dredge deep-water basin and shiploader pier. The dredging provides access and berthing areas at the pier which extends towards shore from the Corps of Engineers' pierhead line. An area on the south side of the pier has been dredged to a depth of 50 feet to match the existing channel. The north side of the pier can be dredged to a depth of 50 feet if so necessitated by an increase in business. The shiploader dock is designed as a finger pier with a berth on each side for loading colliers up to 173,000 dwt. It is provided with a trestle connection to shore. The pier supports the shiploading conveyor and shiploader, plus a roadway with a turnaround area at the offshore end. Both faces of the pier are provided with a fendering system. A turning dolphin has been constructed at the outer end, connected by a walkway to the pier.
Sample 1
Marine Facilities. LNG ships will off-load their LNG cargoes at two protected berths to be constructed on the Site, each equipped with mooring systems and accessories for safe berthing and de-berthing of LNG ships. The LNG ship berths will be located in a new marine basin, which will include a maneuvering basin to turn and move the LNG ships into their berth. A new 1250 ft by 1100 ft (approximate) marine basin will be dredged to a depth of at least 45 feet and will be connected to the Sabine Pass Channel. The new marine basin and berths will be able to accommodate both currently operating LNG ships and future ships, each of which will be capable of holding up to 250,000 cubic meters (m3) of LNG. The Facility will have three tugs, two line handling boats, and facilities for their berthing at the Facility. Onboard ship pumps will deliver LNG to low-pressure LNG storage Tanks via stainless steel unloading arms and cryogenic piping. Each berth will have one set of LNG unloading arms. Each set of unloading arms will consist of four arms, two for unloading, one for vapor return and one for either unloading or vapor return. Space for a fifth arm will be reserved on the platform. All the arms will be equipped with powered emergency release couplings (“PERCs”), swivel joints to provide the required range of movement between the ship and the shore connections, and quick connect/disconnect couplings to facilitate hook up to the LNG ship. The unloading arms will be capable of being drained into the LNG unloading lines prior to disconnecting. The unloading arms will be connected to two parallel stainless steel insulated LNG transfer lines for each berth. These four lines then will be manifolded together with valves into a single pair of stainless steel insulated lines which will run along the main piperack to transfer the LNG into the Tanks. The average LNG unloading rate will be 12,000 m3/hr (423,780 ft3/hr) from each ship, at approximately 75 pounds per square inch gauge (psig) and -260oF. Two ships will be able to unload simultaneously; however, this will require reduced unloading rates. All mooring line hooks shall be specifically ordered with, and include load cells for line tension monitoring, and quick release electrical and mechanical mechanisms. The load cells and electrical quick release mechanism shall not be wired or energized for service, but only reserved for future at a later date by the Owner. Contractor is responsible for detail design for marine facilities based on Owne...
Sample 1
Marine Facilities. Navigation monitoring system is not included in the Scope of Work. • Remote quick release hooks are not included in the Scope of Work. All mooring line hooks shall be specifically ordered by Contractor with, and include load cells for line tension monitoring, and quick release electrical and mechanical mechanisms. The load cells and electrical quick release mechanism shall not be wired or energized for service, and are intended to be reserved for future use by Owner.
Sample 1

Related to Marine Facilities

  • Banking Facilities CLAUSE 2.29 of the Disclosure Schedule sets forth ------------------ a true, correct and complete list of:

  • Access to Facilities Each of the Company and each of its Subsidiaries will permit any representatives designated by the Purchaser (or any successor of the Purchaser), upon reasonable notice and during normal business hours, at such person's expense and accompanied by a representative of the Company, to:

  • Facilities Keep all properties useful or necessary to Borrower's business in good repair and condition, and from time to time make necessary repairs, renewals and replacements thereto so that such properties shall be fully and efficiently preserved and maintained.

  • Office Facilities During the Employment Period, the Company will furnish Executive, without charge, suitable office facilities for the purpose of performing his duties hereunder, which facilities shall include secretarial, telephone, clerical and support personnel and services and shall be similar to those furnished to employees of the Company having comparable positions.

  • Common Facilities “Common Facilities” includes all areas, facilities, utilities, equipment and services provided by Landlord for the common use or benefit of the occupants of the Property, and their employees, agents, customers and other invitees, including without limitation building lobbies, common corridors and hallways, restrooms, pedestrian walkways, driveways and access roads, access facilities for disabled persons (including elevators), truck serviceways, loading docks, garages, driveways, parking lots, landscaped areas, stairways, elevators, retaining walls, all areas required to be maintained under the conditions of governmental approvals for the Property, comfort and first-aid stations, parcel pick-up stations and other generally understood public or common areas. All Common Facilities shall at all times be subject to the exclusive control and management of Landlord. Landlord shall have the right, without liability to Tenant, to relocate, alter, improve, or adjust the size and location of any Common Facilities from time to time, and Landlord shall have the right from time to time to establish, modify and enforce reasonable rules and regulations with respect to the Common Facilities. Landlord shall have the right to construct, maintain and operate lighting facilities on the Common Facilities; to police the same; from time to time to change the area, level, location and arrangement of parking areas and other facilities; to restrict parking by tenants, their officers, agents and employees to employee parking areas; to enforce parking charges (by operation of meters or otherwise), with appropriate provisions for free parking ticket validating by tenants; to close all or any portion of the Common Facilities to such extent as may, in the opinion of Landlord’s counsel, be legally sufficient to prevent a dedication thereof or the accrual of any rights to any person or the public therein; to close temporarily all or any portion of the Common Facilities; to discourage non-customer parking; and to do and perform such other acts in and to the Common Facilities which Landlord shall determine, using good business judgment, to be advisable to improve the convenience and use thereof by tenants, their officers, agents, employees and customers. Subject to the foregoing, Tenant may use all Common Facilities not within the Premises, under a revocable license, on a nonexclusive basis in common with other tenants. If any such license is revoked, or if the amount of such areas is diminished, Landlord shall not be subject to any liability and Tenant shall not be entitled to any compensation or abatement of rent, nor shall such revocation or diminution be deemed constructive or actual eviction.

  • Working Facilities During the Term of Employment, the Company shall furnish the Executive with an office, secretarial help and such other facilities and services suitable to his position and adequate for the performance of his duties hereunder.

  • Facility Prudential is willing to consider, in its sole discretion and within limits which may be authorized for purchase by Prudential Affiliates from time to time, the purchase of Shelf Notes pursuant to this Agreement. The willingness of Prudential to consider such purchase of Shelf Notes is herein called the “Facility”. At any time, the aggregate principal amount of Shelf Notes stated in Section 1.2, minus the aggregate principal amount of Shelf Notes purchased and sold pursuant to this Agreement prior to such time, minus the aggregate principal amount of Accepted Notes (as hereinafter defined) which have not yet been purchased and sold hereunder prior to such time, is herein called the “Available Facility Amount” at such time. NOTWITHSTANDING THE WILLINGNESS OF PRUDENTIAL TO CONSIDER PURCHASES OF SHELF NOTES BY PRUDENTIAL AFFILIATES, THIS AGREEMENT IS ENTERED INTO ON THE EXPRESS UNDERSTANDING THAT NEITHER PRUDENTIAL NOR ANY PRUDENTIAL AFFILIATE SHALL BE OBLIGATED TO MAKE OR ACCEPT OFFERS TO PURCHASE SHELF NOTES, OR TO QUOTE RATES, SPREADS OR OTHER TERMS WITH RESPECT TO SPECIFIC PURCHASES OF SHELF NOTES, AND THE FACILITY SHALL IN NO WAY BE CONSTRUED AS A COMMITMENT BY PRUDENTIAL OR ANY PRUDENTIAL AFFILIATE.

  • Parking Facilities All parking areas now or hereafter made available by Landlord for use by tenants, including, without limitation, open-air parking, parking decks and parking areas under or within the Building, whether reserved, exclusive, non-exclusive or otherwise.

  • Refinancing Facilities (a) At any time after the Closing Date, the Borrowers may obtain, from any Lender or any Additional Lender, Credit Agreement Refinancing Indebtedness in respect of (i) all or any portion of the Term Loans then outstanding under this Agreement (which, for purposes of this clause (i), will be deemed to include any then outstanding Other Term Loans and Other Term Loan Commitments) or (ii) all or any portion of the Revolving Loans (or unused Revolving Credit Commitments) under this Agreement (which, for purposes of this clause (ii), will be deemed to include any then outstanding Other Revolving Loans and Other Revolving Commitments), in the form of (x) Other Term Loans or Other Term Loan Commitments or (y) Other Revolving Loans or Other Revolving Commitments, as applicable, in each case, pursuant to a Refinancing Amendment; provided that such Credit Agreement Refinancing Indebtedness (A) shall rank pari passu in right of payment and of security with the other Loans and Commitments hereunder, (B) will have such pricing, fees, premiums, and interest or optional prepayment terms as may be agreed by the Borrowers and the Lenders thereof, (C)(x) with respect to any Other Revolving Loans or Other Revolving Commitments, will have a maturity date that is not prior to the maturity date of Revolving Loans (or unused Revolving Credit Commitments) being refinanced and (y) with respect to any Other Term Loans or Other Term Loan Commitments, will have a maturity date that is not prior to the maturity date of, and will have a Weighted Average Life to Maturity that is not shorter than, the then applicable Weighted Average Life to Maturity of the Term Loans being refinanced (other than to the extent of nominal amortization for periods where amortization has been eliminated or reduced as a result of prepayments of such Term Loans), (D) any Credit Agreement Refinancing Indebtedness in the form of Other Term Loans or Other Term Loan Commitments will share ratably in any voluntary and mandatory prepayments or repayments of Term Loans (unless the Lenders providing the Other Term Loans agree to participate on a less than pro rata basis in any voluntary or mandatory prepayments or repayments), (E) will, in the case of any Credit Agreement Refinancing Indebtedness in the form of Other Revolving Loans or Other Revolving Commitments, provide that (1) the borrowing and repayment (except for (i) payments of interest and fees at different rates on Other Revolving Commitments (and related outstandings), (ii) repayments required upon the maturity date of the Other Revolving Commitments and (iii) repayments made in connection with a permanent repayment and termination of commitments (subject to clause (3) below)) of Loans with respect to Other Revolving Commitments after the date of obtaining any Other Revolving Commitments shall be made on a pro rata basis with all other Revolving Credit Commitments, (2) subject to the provisions of Section 2.3 and Section 2.4 to the extent dealing with Swing Line Loans and Letters of Credit which mature or expire after a maturity date when there exists Incremental Revolving Credit Commitments with a longer maturity date, all Swing Line Loans and Letters of Credit shall be participated on a pro rata basis by all Lenders with Other Revolving Commitments in accordance with their percentage of the Revolving Credit Commitments (and except as provided in Section 2.3 and Section 2.4, without giving effect to changes thereto on an earlier maturity date with respect to Swing Line Loans and Letters of Credit theretofore incurred or issued), (3) the permanent repayment of Revolving Loans with respect to, and termination of, Other Revolving Commitments after the date of obtaining any Other Revolving Commitments shall be made on a pro rata basis with all other Revolving Credit Commitments, except that the Borrowers shall be permitted to permanently repay and terminate commitments of any such Class on a better than a pro rata basis as compared to any other Class with a later maturity date than such Class and (4) assignments and participations of Other Revolving Commitments and Other Revolving Loans be governed by the same assignment and participation provisions applicable to Revolving Credit Commitments and Revolving Loans, (F) such Credit Agreement Refinancing Indebtedness shall be subject to the Intercreditor Agreement and (G) will have terms and conditions that are not materially more restrictive, taken as a whole, to Holdings and its Restricted Subsidiaries than those applicable to the Refinanced Debt, taken as a whole, as determined in Holdings’ good faith judgment in consultation with the Administrative Agent (except for (A) covenants and events of default applicable only to periods after the Latest Maturity Date in effect at the time of the incurrence or issuance of any such Credit Agreement Refinancing Indebtedness or (B) unless the Borrowers enter into an amendment to this Agreement with the Administrative Agent (which amendment shall not require the consent of any other Lender) to add such more restrictive terms for the benefit of the Lenders). Each Class of Credit Agreement Refinancing Indebtedness incurred under this Section 2.26 shall be in an aggregate principal amount that is (x) not less than $10,000,000 in the case of Other Term Loans or $5,000,000 in the case of Other Revolving Loans and (y) an integral multiple of the Dollar Amount of $1,000,000 in excess thereof. Any Refinancing Amendment may provide for the issuance of Letters of Credit for the account of the Borrowers, or the provision to the Borrowers of Swing Line Loans, pursuant to any Other Revolving Commitments established thereby, in each case on terms substantially equivalent to the terms applicable to Letters of Credit and Swing Line Loans under the Revolving Credit Commitments.

  • Other Facilities Promptly and in no event more than ten (10) days after the effectiveness thereof, copies of (i) any documents, agreements or instruments evidencing indebtedness for borrowed money of any DT Entity and (ii) any amendment, restatement, supplement or other modification any documents, agreements or instruments evidencing indebtedness for borrowed money of any DT Entity, including, without limitation, any fee letter, waiver, consent and any other document, agreement or instrument executed in connection with any of the foregoing.

Time is Money Join Law Insider Premium to draft better contracts faster.