Manufacturing Defects Sample Clauses

Manufacturing Defects. Challenger warrants that at the time of initial invoice, the Product will be free of any defects in materials and workmanship. All synthetic turf is subject to normal wear and tear. Normal wear and tear is not a manufacturing defect and is not covered by this warranty.
Sample 1Sample 2
AutoNDA by SimpleDocs
Manufacturing Defects. Bioniche Pharma is responsible for providing Delcath with Product meeting the Manufacturing Requirements and shall assume all costs (including the cost of freight, insurance, customs, duties and tariffs) for any batches failing to do so, and the Purchase Price shall not be owed by Delcath in respect thereof, and any amounts previously paid in respect thereof by Delcath including the costs of CONFIDENTIAL TREATMENT [***] Indicates that text has been omitted which is the subject of a confidential treatment request. This text has been separately filed with the Securities and Exchange Commission. freight, insurance, customs, duties and tariffs paid by Delcath to third parties shall be reimbursed to Delcath by Bioniche Pharma.
Sample 1
Manufacturing Defects. Buzz Off shall bear no liability for any Manufacturing Defect or any responsibility for correcting, curing, or otherwise remedying any such Manufacturing Defect. However, if, prior to shipment of such Products to Licensee, Buzz Off identifies any Manufacturing Defects that Buzz Off believes it can remedy, Buzz Off may, but is not required to, notify Licensee of the quantity of items affected, the nature of the defect or defects, the remedial measures proposed, and the additional charge, if any, to be paid by Licensee to Buzz Off for such additional services. Licensee may accept or reject Buzz Off's offer to attempt to remedy any Manufacturing Defects. BUZZ OFF DOES NOT HEREBY WARRANT THE SUCCESS OR EFFICACY OF ANY REMEDIAL MEASURES.
Sample 1
Manufacturing Defects. The Supplier undertakes to perform the manufacturing in such a manner that the products made are free from defects. The Buyer, however, acknowledges their awareness that each individual process can give rise to imperfections, which are considered acceptable if the following parameters are respected in sequence: AISI 304/316 BRUSHING/ POLISHING/ EMBOSSED/ PATTERNED/ CHEMICAL ETCHED/ BEAD BLASTING/ ANTIFINGER 1st check: defects are not visible at a distance of 2 meters, sheet metal in a horizontal position, under non-direct light . 2nd check: defects are visible at a distance of 1 meter, sheet metal in a horizontal position, under non-direct light; max 1N°. /sqm. AISI 441/430 - BRUSHING/ EMBOSSED/ PATTERNED 1st check: defects are not visible at a distance of 2 meters, sheet metal in a horizontal position, under non-direct light. 2nd check: defects are visible at a distance of 1 meter, sheet metal in a horizontal position, under non-direct light; max 1N°. /sqm. AISI 304/316 – INCO coloring process/TSTEEL 1st check: defects not visible at a distance of 2 meters, sheet metal in a horizontal position, under non-direct light. 2nd check: defects are visible at a distance of 1 meter, sheet metal in a horizontal position, under non-direct light; max 1N°. /sqm. Where the sheet metal is intended for façade cladding, the above parameters shall be deemed to have been doubled. Any imperfections (of an aesthetic nature, which do not compromise the use and processing of the sheet metal) detected on the entire perimeter of the sheet as indicated below are not to be considered defects: coloring with the INCO 20mm system; 20mm chemical etching; other processing 10 mm.. The Buyer undertakes to agree any non-standard requirements, subject to feasibility analysis on the part of the Supplier.
Sample 1
Manufacturing Defects. The Contractor shall detect, document, and correct defects during manufacturing and assess potential process improvement opportunities. When required, the Contractor shall conduct analysis meetings to determine defect root cause and take action to prevent recurrence. Defects shall not be reprocessed until they have been documented and dispositioned. The Contractor shall provide feedback on the status and results of defect preventive and corrective action to the Government as failure analysis and correction action reports IAW CDRL A005. This CDRL is required only as a result of defects found that would require significant build process changes or result in a class I ECP to the top level assembly.
Sample 1

Related to Manufacturing Defects

  • Latent Defects Notwithstanding anything to the contrary set forth herein, no acceptance, or deemed acceptance, by City pursuant to this Section shall be applicable with respect to any Latent Defects. An acceptance, or deemed acceptance, by City pursuant to this Section shall not mean that City has accepted, or the other party has been relieved of, responsibility for: (i) compliance with the Laws; (ii) the proper application of construction means or methods; or (iii) correcting any portion of the Project if it later is determined that any portion of the Project is inconsistent with the Final Documents and Drawings.

  • Manufacturing Rights Manufacturing Rights will be governed by Attachment 6.

  • API If the Software offers integration capabilities via an API, your use of the API may be subject to additional costs or Sage specific policies and terms and conditions (which shall prevail in relation to your use of the API). You may not access or use the API in any way that could cause damage to us or the Software, or in contravention of any applicable laws. We reserve the right in our sole discretion, to: (i) update any API from time to time; (ii) place limitations around your use of any API; and (iii) deny you access to any API in the event of misuse by you or to otherwise protect our legitimate interests.

  • Supply of Materials The following materials will be supplied by the department Name of Materials Rate. Place of delivery 1.

  • Product Specifications The Company agrees that all Products sold to Xxxx hereunder shall conform to the respective specifications set forth on Schedule A or to such other specifications as are from time to time agreed upon by the Parties.

  • Defective Products None of the Group Companies has manufactured, sold or supplied products which are, or were, in any material respect, faulty or defective, or which do not comply in any material respect with any representations or warranties expressly made by such Group Company, or with all applicable regulations, standards and requirements.

  • Product Warranty Seller provides general warranties of fitness and general warranties that the goods are free from defects, for 1 year from acceptance of the goods, except as may otherwise be set forth in the Description/Proposal, or other attached warranty.

  • Defective Product Seller must guarantee a return for all defective products. a) Goods rejected by Buyer for whatever reason shall be held, transported and/or stored at Seller’s sole expense. Seller shall promptly reimburse Buyer for any such expenses. B) Defective product purchase COD will be returned COD to Seller or COD check will be cancelled, at Buyer’s discretion. c) Seller is responsible for all costs associated RoHS noncompliance returns and will accept a full return for all parts not meeting RoHS compliance criteria if necessary. d) Seller is 100% responsible for all monetary and/or rework costs associated with product failures in addition to any further cost whatsoever associated with product failures. e) If suspect parts/counterfeit parts are furnished under this agreement such parts shall be impounded by Buyer. Buyer may provide a sample batch Supplier for verification and authentication. In addition, Buyer reserves the right to send such items to the appropriate manufacturer and appropriate authorities for investigation. f) Seller shall be liable for all costs relating to impound, investigation, removal, or replacement of suspect/counterfeit parts.

  • Quality Specifications SANMINA-SCI shall comply with the quality specifications set forth in its Quality Manual, incorporated by reference herein, a copy of which is available from SANMINA-SCI upon request.

  • Manufacturing Technology Transfer With respect to each Technology Transfer Product, upon AbbVie’s written request after the Inclusion Date for the Included Target to which such Technology Transfer Product is Directed, Morphic shall effect a full transfer to AbbVie or its designee (which designee may be an Affiliate or a Third Party manufacturer) of all Morphic Know-How and Joint Know-How relating to the then-current process for the Manufacture of such Technology Transfer Product (the “Manufacturing Process”) and to implement the Manufacturing Process at facilities designated by AbbVie (such transfer and implementation, as more fully described in this Section 5.3, the “Manufacturing Technology Transfer”). To assist with the Manufacturing Technology Transfer, Morphic will make its personnel reasonably available to AbbVie during normal business hours for up to [***] FTE hours with respect to each Included Target (in each case, free of charge to AbbVie) to transfer and implement the Manufacturing Process under this Section 5.3. Thereafter, if requested by AbbVie, Morphic shall continue to perform such obligations; provided, that AbbVie will reimburse Morphic for its full-time equivalent (FTE) costs (for clarity, in excess of [***] FTE hours) and any reasonable and verifiable out-of-pocket costs incurred in providing such assistance. CERTAIN CONFIDENTIAL INFORMATION CONTAINED IN THIS DOCUMENT, MARKED BY [***], HAS BEEN OMITTED BECAUSE IT IS NOT MATERIAL AND WOULD LIKELY CAUSE COMPETITIVE HARM TO THE COMPANY IF PUBLICLY DISCLOSED.

Time is Money Join Law Insider Premium to draft better contracts faster.