Main Dimensions Sample Clauses

Main Dimensions. The Vessel shall have the dimensions and characteristics stated in the Technical Specification and in the General Arrangement, including the following main particulars: - length over all - length between perpendiculars - breadth moulded - depth moulded - draft design - Gross tonnage abt 63.00m 55.80m 15.00m 6.10m 5.00m 1,600 tonnes - Deadweight abt 1,650 tonnes at 5.00m - Bollard Pullahead - Free running speed, ahead xxxxxxx00 tonnes 14.50 knots at 4.50m draft
Sample 1Sample 2Sample 3See All (8)
AutoNDA by SimpleDocs
Main Dimensions. Length, overall — [**] [Confidential Treatment] metres* Length, between perpendiculars: — [**] [Confidential Treatment] metres* Breadth, moulded hull — [**] [Confidential Treatment] metres (with a right for the Builder to reduce to 40.0 metres) Depth to deck 4 — [**] [Confidential Treatment] metres Design draft, moulded — [**] [Confidential Treatment] metres (* signifies a tolerance of +/- half a metre)
Sample 1
Main Dimensions. The TFQD solar cells main dimensions shall be indicated as per Figure 2. The area of demonstrators is required to be 1 cm x 1 cm. Two possible indicative values of thickness are foreseen:10 µm or 25 µm depending on the thickness of the Cu carrier.
Sample 1
Main Dimensions. Length between perpendiculars Approximately 193 metres - Length overall Approximately 223 metres - Breadth at water line Approximately 31 metres - Deadweight at Design Draught Approximately 5000 metric tons Approximately means +/- 1%.
Sample 1
Main Dimensions. DiDIY and outcomes‌ In a narrower view DiDIY is aimed at producing physical artefacts, while in a broader view it is also aimed at creating intangibles and performing services. Note: This Dimension aims at further exploring the relation between DiDIY and ABC, as presented in Pillar B.
Sample 1

Related to Main Dimensions

  • Interior (a) Ceilings, sidewalls and bulkhead panels shall be clean and free of cracks and stains;

  • Walls 12 Developer shall provide rustication patterns on all walls, except drainage headwalls, in Aesthetic 13 Area 3 in accordance with Exhibit L2.24 of the LAADCR. The final designs shall resemble these 14 simulations.

  • Exterior and interior functional areas and spaces of the Project, with technical and equipment requirements on each;

  • Ceilings 13.1 Lambdaboard ceilings, minimum 25mm thick with a width of 1220mm x 1800mm, skimmed with Plascon EZ Joint and EZ Skim system.

  • Technical Specifications The Technical Specifications furnished on the CD are intended to establish the standards for quality, performance and technical requirements for all labor, workmanship, material, methods and equipment necessary to complete the Work. When specifications and drawings are provided or referenced by the County, these are to be considered part of the Scope of Work, and to be specifically documented in the Detailed Scope of Work. For convenience, the County supplied specifications, if any, and the Technical Specifications furnished on the CD.

  • STORAGE TANKS AND SUMPS 3.1 Is any above or below ground storage of gasoline, diesel, petroleum, or other Hazardous Materials in tanks or sumps proposed in, on or about the Premises? Existing Tenants should describe any such actual or proposed activities. Yes [ ] No [ ] If yes, please explain:

  • Configuration The configuration for the Purchase Right Aircraft will be the Detail Specification for Model 767-3S2F aircraft at the revision level in effect at the time of the Supplemental Agreement. Such Detail Specification will be revised to include (i) changes required to obtain required regulatory certificates and (ii) other changes as mutually agreed upon by Boeing and Customer.

  • Communications Equipment Members of the board of directors or any committee thereof may participate in and act at any meeting of such board or committee through the use of a conference telephone or other communications equipment by means of which all persons participating in the meeting can hear each other, and participation in the meeting pursuant to this section shall constitute presence in person at the meeting.

  • Temperature Where low temperature and/or self-service cases are used for any of such merchandise coming under the jurisdiction of the Union, such cases shall be served only by employees covered by this Agreement.

  • Design At no cost to SCE, Seller shall be responsible for:

Time is Money Join Law Insider Premium to draft better contracts faster.