Laboratory Technicians Sample Clauses

Laboratory Technicians. ARTICLE NUMBER Safety Boots or Shoes 2 pair Shirts – Summer 2 Shirts – Winter 2 Pants 5 pair Coat – Lightweight 1 T-Shirts 5 Toque 1 In addition to the above, commercially laundered coveralls and labcoats (smocks) shall be provided.
AutoNDA by SimpleDocs
Laboratory Technicians. The current laboratory personnel are listed on Schedule 6.2(g). Prior to Closing, Buyer and Seller shall work together to determine in good faith those laboratory technicians that will be transferred with the Business to Buyer and those laboratory technicians that will remain with Seller and will not be transferred. Such division will permit Buyer to take the laboratory manager, all test engineers and up to nine laboratory technicians, and will permit Seller to retain the remaining laboratory technicians (it being understood that the test engineers for the Business are already included in the definition of Business Employees). The laboratory technicians that are allocated to Buyer shall be considered Business Employees. The laboratory technicians who are allocated to Seller shall not be considered Business Employees.
Laboratory Technicians. 6 By appointment. Appropriate Diploma qualification (or equivalent). No relevant experience necessary. Probation/training level. 44716 5 Progression to this level after 1824 hours at Level 6 provided the employee demonstrates the technical proficiency to perform routine analyses in a timely and competent manner with minimal supervision. Works effectively, efficiently and cooperatively with other members of laboratory team. May be approached by more senior staff to provide ideas and input when problem solving. May be used as entry level for candidates with relevant external experience. 46059 4 Progression to this level after 1824 hours at Level 5 provided the employee demonstrates proficiency in more technically demanding analyses. Contributes to efficiency of laboratory by suggesting improvements to procedures. Demonstrates ability to undertake some specialised projects with advice/supervision. May undertake writing of procedures with supervision if required. Contributes to maintenance of work standards and environment by volunteering in areas such as Workplace Health and Safety, Quality Control, continuing education etc. May be approached by more senior staff to provide ideas and input when problem solving. May be used as entry level for candidates with relevant external experience. 47437
Laboratory Technicians. Department will consist of the Quality Assurance Lab, Factory Services and, Environmental Department.
Laboratory Technicians. Safety Boots or Shoes 2 pair Shirts 2 Shirts Winter 2 Pants 5 pair Coat Lightweight 1 T-Shirts 5 1 In addition to the above, laundered coveralls and (smocks) shall be provided.
Laboratory Technicians. Level 1 are supported, inducted and trained and new science teachers are inducted in safe use of chemicals and equipment, if required. SELECTION CRITERIA The following selection criteria are identified as being required to achieve the outcomes in the context of this position. Applicants will need to provide evidence of their capacity to transfer their knowledge and skills to achieving the outcomes of this position.
Laboratory Technicians. 22.1 The Union agrees to work with health services which wish to employ technicians to perform non-scientific work subject to the provisions of this clause.
AutoNDA by SimpleDocs

Related to Laboratory Technicians

  • Licensed Technology The term "Licensed Technology" shall mean the ------------------- Licensed Patents, plus all improvements thereto developed by Licensor, and all related data, know-how and technology.

  • Manufacturing Technology Transfer With respect to each Technology Transfer Product, upon AbbVie’s written request after the Inclusion Date for the Included Target to which such Technology Transfer Product is Directed, Morphic shall effect a full transfer to AbbVie or its designee (which designee may be an Affiliate or a Third Party manufacturer) of all Morphic Know-How and Joint Know-How relating to the then-current process for the Manufacture of such Technology Transfer Product (the “Manufacturing Process”) and to implement the Manufacturing Process at facilities designated by AbbVie (such transfer and implementation, as more fully described in this Section 5.3, the “Manufacturing Technology Transfer”). To assist with the Manufacturing Technology Transfer, Morphic will make its personnel reasonably available to AbbVie during normal business hours for up to [***] FTE hours with respect to each Included Target (in each case, free of charge to AbbVie) to transfer and implement the Manufacturing Process under this Section 5.3. Thereafter, if requested by AbbVie, Morphic shall continue to perform such obligations; provided, that AbbVie will reimburse Morphic for its full-time equivalent (FTE) costs (for clarity, in excess of [***] FTE hours) and any reasonable and verifiable out-of-pocket costs incurred in providing such assistance. CERTAIN CONFIDENTIAL INFORMATION CONTAINED IN THIS DOCUMENT, MARKED BY [***], HAS BEEN OMITTED BECAUSE IT IS NOT MATERIAL AND WOULD LIKELY CAUSE COMPETITIVE HARM TO THE COMPANY IF PUBLICLY DISCLOSED.

  • Manufacturing (a) The Supplier shall without limitation be responsible, at no additional cost to the Purchaser, for: sourcing and procuring all raw materials for the Products; obtaining all necessary approvals, permits and licenses for the manufacturing of the Products; providing sufficient qualified staff and workers to perform the obligations under this Purchase Agreement; implementing and maintaining effective inventory and production control procedures with respect to the Products; and handling other matters as reasonably requested by the Purchaser from time to time.

  • New Technology When new or updated technology is introduced into a workplace, it will be the responsibility of the employer to provide appropriate and, if necessary, ongoing training to the employees directly affected. Such training will include any health and safety implications or information that will enable employees to operate the equipment without discomfort and will help maintain their general well-being.

  • Background Technology List here prior contracts to assign Inventions that are now in existence between any other person or entity and you. [ ] List here previous Inventions which you desire to have specifically excluded from the operation of this Agreement. Continue on reverse side if necessary.

  • Reverse Engineering The Customer must not reverse assemble or reverse compile or directly or indirectly allow or cause a third party to reverse assemble or reverse compile the whole or any part of the software or any products supplied as a part of the Licensed System.

  • Engineering Forest Service completed survey and design for Specified Roads prior to timber sale advertisement, unless otherwise shown in A8 or Purchaser survey and design are specified in A7. On those roads for which Forest Service completes the design during the contract, the design quantities shall be used as the basis for revising estimated costs stated in the Schedule of Items and adjusting Timber Sale Account. Forest Service engineering shall be completed according to the schedule in A8. Should Forest Service be unable to perform the designated survey and design by the completion date or other agreed to time, upon written agreement, Purchaser shall assume responsibility for such work. In such event, Contracting Officer shall revise:

  • Third Party Technology The Company makes use of third party technology to collect information required for traffic measurement, research, and analytics. Use of third party technology entails data collection. We therefore would like to inform clients the Company enables third parties to place or read cookies located on the browsers of users entering the Company’s domain. Said third parties may also use web beacons to collect information through advertising located on the Company’s web site. Please note that you may change your browser settings to refuse or disable Local Shared Objects and similar technologies; however, by doing so you may be disabling some of the functionality of Company’s services.

  • Architects, Consultants and Contractors Landlord and Tenant hereby acknowledge and agree that: (i) the general contractor and any subcontractors for the Tenant Improvements shall be selected by Landlord, subject to Tenant’s approval, which approval shall not be unreasonably withheld, conditioned or delayed, and (ii) DGA shall be the architect (the “TI Architect”) for the Tenant Improvements.

  • Development Work The Support Standards do not include development work either (i) on software not licensed from CentralSquare or (ii) development work for enhancements or features that are outside the documented functionality of the Solutions, except such work as may be specifically purchased and outlined in Exhibit 1. CentralSquare retains all Intellectual Property Rights in development work performed and Customer may request consulting and development work from CentralSquare as a separate billable service.

Time is Money Join Law Insider Premium to draft better contracts faster.