INVESTIGATIONAL PRODUCTS Sample Clauses

INVESTIGATIONAL PRODUCTS. Parties acknowledge and agree that the Institution’s pharmacy, or such other pharmacy as appointed by Sponsor, the Principal Investigator and the Institution, will be responsible for certain tasks in relation to the handling of the Investigational Product. Any agreements between the pharmacy and any of the Parties will be in writing and must be in accordance with the Institution’s internal policies. Any such agreements will be annexed to this Agreement as Annex 4, if applicable. Subject to the foregoing, the Sponsor and/or CRO will provide the Principal Investigator and the pharmacy with all necessary information on the Investigational Product(s), quality and handling instructions thereof and sufficient quantities needed to conduct the Clinical Trial free of charge. The Site Parties shall not use or permit the Research Staff or any third party to use the Investigational Product for any purpose other than the conduct of the Clinical Trial and upon termination or expiration of this Agreement all unused Investigational Product shall, at the Sponsor’s option, either be returned to the Sponsor or disposed of in accordance with the Protocol or the Sponsor’s written instructions.
Sample 1Sample 2See All (9)
AutoNDA by SimpleDocs
INVESTIGATIONAL PRODUCTS. 7.1. Parties acknowledge and agree that the Institution’s pharmacist, or such other pharmacist as appointed by Sponsor the Principal Investigator and the Institution, will be responsible for certain tasks in relation with the handling of the Investigational Product. Any agreements between the pharmacist and any of the Parties will be in writing and must be in accordance with the Institution’s internal policies. Any such agreements will be annexed to this Agreement as Annex 4.
Sample 1Sample 2Sample 3See All (6)
INVESTIGATIONAL PRODUCTS. Test Article: ACRYSOF IQ PanOptix Presbyopia-Correcting IOL Model TFNT00 The TFNT00 IOL is a CE Marked device that is commercially available in the countries of the participating Investigators as well as other countries across the globe. The lens is an ultraviolet and blue-light filtering foldable multifocal IOL of single-piece design with a central optic and two open-loop haptics. The optic is 6.0 mm in diameter and the lens has an overall diameter of 13.0 mm. The optic consists of a proprietary high refractive index hydrophobic acrylic material with a blue light filtering chromophore which filters light in a manner that approximates the human crystalline lens in the 400-475 nm blue light wavelength range (Xxxxxxxx 1962). It is biconvex and consists of a soft acrylic material capable of being folded prior to insertion, allowing placement through an incision smaller than the optic diameter of the lens. After surgical insertion into the eye, the lens gently unfolds to its intended shape. The optic diffractive structure is in the central 4.5 mm portion of the optic zone and divides the incoming light to create a +2.17 D intermediate and a +3.25 D near add power. The anterior surface is designed with negative spherical aberration to compensate for the positive spherical aberration of the cornea. The lens is available in a diopter range of 13.0 – 30.0 D in 0.5 D increments and 31.0 D –
Sample 1
INVESTIGATIONAL PRODUCTS. Parties acknowledge and agree that the Institution’s pharmacist, or such other pharmacist as appointed by Sponsor the Principal Investigator and the Institution, will be responsible for certain tasks in relation with the handling of the Investigational Product. Any agreements between the pharmacist and any of the Parties will be in writing and must be in accordance with the Institution’s internal policies. Any such agreements will be annexed to this Agreement as Annex 4. Subject to the foregoing, the Sponsor will provide the Principal Investigator and the pharmacist with all necessary information on the Investigational Product(s), quality and handling instructions thereof and sufficient quantities needed to conduct the Clinical Trial. The Principal Investigator shall not use or permit the Research Staff or any third party to use the Investigational Product for any purpose other than the conduct of the Clinical Trial and upon termination or expiration of this Agreement all unused Investigational Product shall, at the Sponsor’s option, either be returned to the Sponsor or disposed of in accordance with the Protocol or the Sponsor’s written instructions. In case Sponsor has provided any equipment, such equipment to be further described in Annex 5 attached to this Agreement, to Institution or the Principal Investigator for the conduct of the Clinical Trial at the Trial Site, such equipment shall remain the property of Sponsor and shall be treated in accordance with the provisions as described in more detail in said Annex 5.
Sample 1

Related to INVESTIGATIONAL PRODUCTS

  • Additional Products Upon satisfying the minimum order requirements above, Enrolled Affiliate may order Additional Products.

  • Manufacture 2.1. The LED(s) on the LED module shall be equipped with suitable fixation elements.

  • Product ACCEPTANCE Unless otherwise provided by mutual agreement of the Authorized User and the Contractor, Authorized User(s) shall have thirty (30) days from the date of delivery to accept hardware products and sixty (60) days from the date of delivery to accept all other Product. Where the Contractor is responsible for installation, acceptance shall be from completion of installation. Failure to provide notice of acceptance or rejection or a deficiency statement to the Contractor by the end of the period provided for under this clause constitutes acceptance by the Authorized User(s) as of the expiration of that period. The License Term shall be extended by the time periods allowed for trial use, testing and acceptance unless the Commissioner or Authorized User agrees to accept the Product at completion of trial use. Unless otherwise provided by mutual agreement of the Authorized User and the Contractor, Authorized User shall have the option to run testing on the Product prior to acceptance, such tests and data sets to be specified by User. Where using its own data or tests, Authorized User must have the tests or representative set of data available upon delivery. This demonstration will take the form of a documented installation test, capable of observation by the Authorized User, and shall be made part of the Contractor’s standard documentation. The test data shall remain accessible to the Authorized User after completion of the test. In the event that the documented installation test cannot be completed successfully within the specified acceptance period, and the Contractor or Product is responsible for the delay, Authorized User shall have the option to cancel the order in whole or in part, or to extend the testing period for an additional thirty (30) day increment. Authorized User shall notify Contractor of acceptance upon successful completion of the documented installation test. Such cancellation shall not give rise to any cause of action against the Authorized User for damages, loss of profits, expenses, or other remuneration of any kind. If the Authorized User elects to provide a deficiency statement specifying how the Product fails to meet the specifications within the testing period, Contractor shall have thirty (30) days to correct the deficiency, and the Authorized User shall have an additional sixty (60) days to evaluate the Product as provided herein. If the Product does not meet the specifications at the end of the extended testing period, Authorized User, upon prior written notice to Contractor, may then reject the Product and return all defective Product to Contractor, and Contractor shall refund any monies paid by the Authorized User to Contractor therefor. Costs and liabilities associated with a failure of the Product to perform in accordance with the functionality tests or product specifications during the acceptance period shall be borne fully by Contractor to the extent that said costs or liabilities shall not have been caused by negligent or willful acts or omissions of the Authorized User’s agents or employees. Said costs shall be limited to the amounts set forth in the Limitation of Liability Clause for any liability for costs incurred at the direction or recommendation of Contractor.

  • Manufacturing (a) The Supplier shall without limitation be responsible, at no additional cost to the Purchaser, for: sourcing and procuring all raw materials for the Products; obtaining all necessary approvals, permits and licenses for the manufacturing of the Products; providing sufficient qualified staff and workers to perform the obligations under this Purchase Agreement; implementing and maintaining effective inventory and production control procedures with respect to the Products; and handling other matters as reasonably requested by the Purchaser from time to time.

  • API If the Software offers integration capabilities via an API, your use of the API may be subject to additional costs or Sage specific policies and terms and conditions (which shall prevail in relation to your use of the API). You may not access or use the API in any way that could cause damage to us or the Software, or in contravention of any applicable laws. We reserve the right in our sole discretion, to: (i) update any API from time to time; (ii) place limitations around your use of any API; and (iii) deny you access to any API in the event of misuse by you or to otherwise protect our legitimate interests.

  • Products Products available under this Contract are limited to Software, including Software as a Service, products and related products as specified in Appendix C, Pricing Index. Vendor may incorporate changes to their product offering; however, any changes must be within the scope of products awarded based on the posting described in Section 1.B above. Vendor may not add a manufacturer’s product line which was not included in the Vendor’s response to the solicitation described in Section 1.B above.

  • PRICE LISTS AND PRODUCT INFORMATION Contractors should provide an electronic version of the proposed price list in an Excel format or pdf on a jump drive. Also provide a dealer list, if applicable in an Excel format with "read and write" capabilities on the same jump drive. No costs or expenses associated with providing this information in the required format shall be charged to the State of Arkansas. At the time of contract renewal contractor will furnish OSP with an updated dealer list and published price list.

  • Additional Products and Services Subject to the allocation of funds, the CPO may add similar equipment, supplies, services, or locations, within the scope of this Agreement, to the list of equipment, supplies, services, or locations to be performed or provided by giving written notification to Contractor. For purposes of this Section, the “Effective Date” means the date specified in the notification from the CPO. As of the Effective Date, each item added is subject to this Agreement, as if it had originally been a part, but the charge for each item starts to accrue only on the Effective Date. In the event the additional equipment, supplies, services, or locations are not identical to the items(s) already under this Agreement, the charges therefor will then be Contractor’s normal and customary charges or rates for the equipment, supplies, services, or locations classified in the Fees and Costs (Exhibit “F”).

  • Marketing Materials (a) During the term of this Agreement, the Sub-Adviser agrees to furnish the Manager at its principal office for prior review and approval by the Manager all written and/or printed materials, including but not limited to, PowerPointÒ or slide presentations, news releases, advertisements, brochures, fact sheets and other promotional, informational or marketing materials (the “Marketing Materials”) for internal use or public dissemination, that are produced or are for use or reference by the Sub-Adviser, its affiliates or other designees, broker-dealers or the public in connection with the Series, and Sub-Adviser shall not use any such materials if the Manager reasonably objects in writing within five business days (or such other period as may be mutually agreed) after receipt thereof. Marketing Materials may be furnished to the Manager by first class or overnight mail, facsimile transmission equipment, electronic delivery or hand delivery.

  • Existing Products 1. Hardware - Title and ownership of Existing Hardware Product shall pass to Authorized User upon Acceptance.

Time is Money Join Law Insider Premium to draft better contracts faster.