Interconnected Transmission Owner. The Transmission Owner to whose transmission facilities or distribution facilities Customer Interconnection Facilities are, or as the case may be, a Customer Facility is, being directly connected. When used in an Interconnection Construction Service Agreement, the term may refer to a Transmission Owner whose facilities must be upgraded pursuant to the Facilities Study, but whose facilities are not directly interconnected with those of the Interconnection Customer.
Interconnected Transmission Owner. Interconnected Transmission Owner shall construct and, unless otherwise indicated, shall own, the following: Attachment Facilities:
Interconnected Transmission Owner. Interconnected Transmission Owner shall construct and, unless otherwise indicated, shall own, the following Interconnection Facilities: Attachment Facilities: • One (1) 115 kV, 2000A, 3-phase center break gang operated switches;
Interconnected Transmission Owner. None. The Interconnected Transmission Owner shall construct and, unless otherwise indicated, shall own, the following Interconnection Facilities: Non-Direct Connection Network Upgrades:
Interconnected Transmission Owner. The Interconnected Transmission Owner shall construct and, unless otherwise indicated, shall own, the following Transmission Owner Interconnection Facilities: Non-Direct Connection Network Upgrades: Atlanta 345-69 kV Substation:
Interconnected Transmission Owner. Attachment Facilities: • One (1) 230 kV, 3000A, 3-phase center break gang operated switches;
Interconnected Transmission Owner. Transmission Owner shall construct and, unless otherwise indicated, shall own, the following Interconnection Facilities: Direct Connection Network Upgrades: • Engineering oversight for the design and construction of the new Xxxx 138 kV Interconnection Substation and the portion of the generation lead transmission line from the new Xxxx 138 kV Interconnection Substation to the Point of Interconnection. (PJM Network Upgrade Number n7371) Non-Direct Connection Network Upgrades: • Xxxxx Run – Circleville 138 kV – Construct 138 kV line extensions from the two (2) dead-end structures the existing Xxxxx Run – Circleville 138 kV line to the new Xxxx 138 kV Substation, and perform final connection of the 138 kV circuit to the new Xxxx 138 kV Substation. (PJM Network Upgrade n7372) • Upgrade line protection and controls at the Xxxxx Run 138 kV Station. (PJM Network Upgrade n7373) • Upgrade line protection and controls at the Circleville 138 kV Station. (PJM Network Upgrade n7374) • Replace the 600 A line disconnect switch on the Xxxxx circuit at the Xxxxxxxx 138 kV Station. (PJM Network Upgrade n6263.2)
Interconnected Transmission Owner. Interconnected Transmission Owner shall construct and, unless otherwise indicated, shall own, the following Interconnection Facilities: Attachment Facilities: PJM Network Upgrade No. N6293 AE1-142 revenue metering, engineering review of customer drawings, equipment nameplates and modification of FirstEnergy circuit diagrams. Non-Direct Connection Network Upgrades: PJM Network Upgrade No.: N6294 At Manitou 34.5 kV Substation – Adjust remote relay and metering settings. PJM Network Upgrade No.: N6675 Manitou-Pleasant Plains 34.5 kV Line – Replace existing structures with new wood pole switch structures and install new tap to the Point of Interconnection with the AE1-142 customer.
Interconnected Transmission Owner. Under the superseded U4-014/V3-040 ISA, the following Transmission Owner Interconnection Facilities were installed: • Transmission Tap Poles in existing Hauto-Siegfried #1 and #4 69 kV lines • Relay equipment installation at Siegfried, Harwood, Hauto, and Ashfield substations. Under the U4-014/AC1-087 ISA, the following Transmission Owner Interconnection Facilities will be installed : • Relay Modifications at the Hauto 69 kV substation (PJM Network Upgrade Number n5904)
Interconnected Transmission Owner. Interconnected Transmission Owner shall construct and, unless otherwise indicated, shall own, the following Interconnection Facilities: • Cut and loop in transmission line to new 69 kV substation (PJM network upgrade N7000) • Upgrade relays at remote ends • Install ADSS fiber optic cable in conduit to provide communication channels to the Interconnection Customer’s 69 kV breaker at new switching station. • Consistent with Schedule C of this ISA, install metering control cable and meter cabinets. • Consistent with Schedule C of this ISA, complete secondary wiring connections at the metering enclosure. • Consistent with Schedule C of this ISA, supply a wireless modem for remote meter interrogation. • Consistent with Schedule C of this ISA, provide, program, install, and own the primary and backup solid state multi-function meters for the new metering position.
