Installation and Implementation Sample Clauses

Installation and Implementation. 36.1. The Contractor shall ensure that the implementation design conforms to an open standard by which new services can be added without disruption to existing services.
AutoNDA by SimpleDocs
Installation and Implementation. Prior to availability of the System, CUSTOMER shall, at CUSTOMER's expense, furnish COMPANY with CUSTOMER's data records for employees, substitutes, sites, job positions, and reasons for absence in a compatible format as specified by COMPANY and in accordance with the SUNFINDER SYSTEM Implementation Manual. If CUSTOMER's data records do not import correctly, due to errors or omissions on CUSTOMER’s part, CUSTOMER shall be responsible for delays in availability of the System and shall, at CUSTOMER's expense, test and rebuild the data records in a compatible format which imports correctly. COMPANY will arrange for access to the SUBFINDER SYSTEM for the CUSTOMER on or before the date agreed in the planning meeting or within six (6) weeks after CUSTOMER has furnished COMPANY its data records in accordance with the Implementation Manual, whichever last occurs. Prior to System availability, COMPANY will, at COMPANY's expense, configure the System, import and load CUSTOMER's data records for employees, substitutes, sites, job positions and reasons for absence furnished by CUSTOMER, provided such data records are furnished by CUSTOMER in accordance with the Implementation Manual, and provide assistance by telephone to CUSTOMER in preparing for System training. COMPANY shall provide CUSTOMER with reasonable assistance in the initial installation and set-up of the system and will provide ongoing telephone assistance regarding the use of the SUBFINDER SYSTEM during the term of this Addendum. All telephone assistance provided by COMPANY shall be provided to the CUSTOMER’s designated SUBFINDER SYSTEM Operator or any person serving as a temporary replacement for the CUSTOMER’s designated SUBFINDER SYSTEM Operator. COMPANY shall not be required to provide support on issues not related to the operation of the SUBFINDER SYSTEM. The performance by COMPANY of any obligation regarding initial set-up and implementation of the SUBFINDER SYSTEM shall be excused, if such failure is caused by any event or circumstance beyond COMPANY’s reasonable control. If COMPANY should fail to make System available as a result of any such event or circumstance beyond its own direct control, COMPANY shall have the right to make System availability within a reasonable time after the cause of such delay has been removed, and the CUSTOMER shall be obligated to accept deferred System availability, it being agreed that upon the occurrence of any such circumstance or event beyond COMPANY’s reasonable ...
Installation and Implementation. 2.6.1 Client will be responsible for the correct installation of the delivered Software. Ingy will only install and/or implement the Products or have them installed and/or implemented based on a written agreement.
Installation and Implementation. Prior to availability of the System, CUSTOMER shall, at CUSTOMER's expense, furnish COMPANY with CUSTOMER's data records for employees, substitutes, sites, job positions, and reasons for absence in a compatible format as specified by COMPANY and in accordance with the ASPS system
Installation and Implementation. 8.1. The Customer acknowledges that, except to the extent otherwise stated in a Schedule, the Agreement and Schedules do not impose upon the Service Provider any obligation to assist the Customer with the installation or configuration of anything and that should the Customer require any services from the Service Provider in that regard, such will be the subject of an independent agreement concluded between the Customer and the Service Provider.
Installation and Implementation. 10.1 Partner shall, at its cost and expense, install and implement the System or Systems for all its sublicensees.
Installation and Implementation. 1. Within ten (10) days following the Effective Date, the parties will conduct an initiating meeting (the "Kickoff Meeting") that will introduce project team members from each party. The Kickoff Meeting will be used to confirm the mutually agreed upon scope of the implementation.
AutoNDA by SimpleDocs
Installation and Implementation. After DMV is satisfied with the live format presentation and configuration of the Deliverables, DMV shall so notify Contractor in writing, directing Contractor to, and Contractor shall, Perform enterprise wide installation in a manner that results in full implementation and functionality of the entire System on the Go-Live Date in accordance with the Documentation.
Installation and Implementation 

Related to Installation and Implementation

  • Installation Where installation is required, Contractor shall be responsible for placing and installing the product in the required locations at no additional charge, unless otherwise designated on the Contract or purchase order. Contractor’s authorized product and price list shall clearly and separately identify any additional installation charges. All materials used in the installation shall be of good quality and shall be free of defects that would diminish the appearance of the product or render it structurally or operationally unsound. Installation includes the furnishing of any equipment, rigging, and materials required to install or replace the product in the proper location. Contractor shall protect the site from damage and shall repair damages or injury caused during installation by Contractor or its employees or agents. If any alteration, dismantling, excavation, etc., is required to achieve installation, the Contractor shall promptly restore the structure or site to its original condition. Contractor shall perform installation work so as to cause the least inconvenience and interference with Customers and with proper consideration of others on site. Upon completion of the installation, the location and surrounding area of work shall be left clean and in a neat and unobstructed condition, with everything in satisfactory repair and order.

  • Installation and Maintenance of Meters The Servicer shall cause to be installed, replaced and maintained meters in accordance with the Servicer Policies and Practices.

  • Inspection and Testing Each Constructing Entity shall cause inspection and testing of the Interconnection Facilities that it constructs in accordance with the provisions of this section. The Construction Parties acknowledge and agree that inspection and testing of facilities may be undertaken as facilities are completed and need not await completion of all of the facilities that a Constructing Entity is building.

  • Location and Facilities The Executive will be furnished with the working facilities and staff customary for executive officers with the title and duties set forth in Section 1 and as are necessary for him to perform his duties. The location of such facilities and staff shall be at the principal administrative offices of the Company and the Bank, or at such other site or sites customary for such offices.

  • Heating, Ventilation and Air Conditioning Landlord shall furnish to the Premises heating, ventilation and air-conditioning (“HVAC”) in accordance with the Design Standards set forth in Exhibit D during Ordinary Business Hours. Landlord shall have access to all air-cooling, fan, ventilating and machine rooms and electrical closets and all other mechanical installations of Landlord (collectively, “Mechanical Installations”), and Tenant shall not construct partitions or other obstructions which may interfere with Landlord’s access thereto or the moving of Landlord’s equipment to and from the Mechanical Installations. No Tenant Party shall at any time enter the Mechanical Installations or tamper with, adjust, or otherwise affect such Mechanical Installations. Landlord shall not be responsible if the HVAC System fails to provide cooled or heated air, as the case may be, to the Premises in accordance with the Design Standards by reason of (i) any equipment installed by, for or on behalf of Tenant, which has an electrical load in excess of the average electrical load and human occupancy factors for the HVAC System as designed, or (ii) any rearrangement of partitioning or other Alterations made or performed by, for or on behalf of Tenant. Tenant shall install, if missing, blinds or shades on all windows, which blinds and shades shall be subject to Landlord’s approval, and shall keep operable windows in the Premises closed, and lower the blinds when necessary because of the sun’s position, whenever the HVAC System is in operation or as and when required by any Requirement. Tenant shall cooperate with Landlord and shall abide by the rules and regulations which Landlord may reasonably prescribe for the proper functioning and protection of the HVAC System. Tenant acknowledges that the server room in the Premises currently has three heat pumps installed, being two 4-ton units, and one 2.5-ton unit (the “Existing Heat Pumps”). The 2.5-ton unit is currently connected and operational. Tenant shall determine whether it is satisfied with the condition of the Existing Heat Pumps and Landlord shall not have any responsibility or liability for the condition, operation, maintenance, repair or replacement of the Existing Heat Pumps. Tenant may operate the Existing Heat Pumps. Tenant shall be responsible for, and pay directly for, all necessary maintenance and repairs to the Existing Heat Pumps. Tenant shall reimburse Landlord monthly for the cost of all utility services used to operate the Existing Heat Pumps within 10 Business Days after receipt of Landlord’s invoice for such amount. Landlord may measure Tenant’s usage of such utility services by either a sub-meter or by other reasonable methods such as by temporary check meters or by survey. Tenant, at its cost, may replace the Existing Heat Pumps with one or more new heat pumps, provided, however, that the capacity of such replacement heat pump(s) shall not exceed the 10.5-ton capacity cooling capacity of the Existing Heat Pumps.

  • Operation and Use So long as the Aircraft, Airframe or any Engine is subject to the Lien of this Trust Indenture, the Owner shall not operate, use or locate the Aircraft, Airframe or any Engine, or allow the Aircraft, Airframe or any Engine to be operated, used or located, (i) in any area excluded from coverage by any insurance required by the terms of Section 4.06, except in the case of a requisition by the U.S. Government where the Owner obtains indemnity in lieu of such insurance from the U.S. Government, or insurance from the U.S. Government, against substantially the same risks and for at least the amounts of the insurance required by Section 4.06 covering such area, or (ii) in any recognized area of hostilities unless covered in accordance with Section 4.06 by war risk insurance, or in either case unless the Aircraft, the Airframe or any Engine is only temporarily operated, used or located in such area as a result of an emergency, equipment malfunction, navigational error, hijacking, weather condition or other similar unforeseen circumstance, so long as Owner diligently and in good faith proceeds to remove the Aircraft from such area. So long as the Aircraft, the Airframe or any Engine is subject to the Lien of this Trust Indenture, the Owner shall not permit such Aircraft, Airframe or any Engine, as the case may be, to be used, operated, maintained, serviced, repaired or overhauled (x) in violation of any Law binding on or applicable to such Aircraft, Airframe or Engine or (y) in violation of any airworthiness certificate, license or registration of any Government Entity relating to the Aircraft, the Airframe or any Engine, except (i) immaterial or non-recurring violations with respect to which corrective measures are taken promptly by Owner or Permitted Lessee, as the case may be, upon discovery thereof, or (ii) to the extent the validity or application of any such Law or requirement relating to any such certificate, license or registration is being contested in good faith by Owner or Permitted Lessee in any reasonable manner which does not involve any material risk of the sale, forfeiture or loss of the Aircraft, Airframe or any Engine, any material risk of criminal liability or material civil penalty against Mortgagee or impair the Mortgagee's security interest in the Aircraft, Airframe or any Engine.

  • Removal of Improvements Except as otherwise expressly agreed to by Lessor and Lessee, Lessee shall have the right to remove all Tank Farm Assets and other improvements, fixtures, equipment, materials, supplies and personal property installed by Lessee from the Premises upon the termination or expiration of this Lease, but in no event later than the date that is 120 days following the expiration or termination of this Lease (the “Removal Date”) and Lessor shall provide Lessee with access to the Premises at reasonable times until expiration of the Removal Date for the purpose of removing such items. Lessee shall provide Lessor with written notice of its election to remove the Tank Farm Assets and other improvements, fixtures, equipment, materials, supplies and personal property from the Premises at least 60 days prior to the expiration of the Lease. If Lessee elects to remove the Tank Farm Assets and Improvements from the Premises after such removal Lessee shall restore any damage to the Premises and clean the Premises so as to eliminate therefrom any accumulation (other than any de minimis and non-hazardous accumulation) of foreign substances, materials, or debris, in addition to any Environmental Cleanup that may be required under Article 10. Lessee shall pay Lessor pro rata Rent (based on the amount of Rent applicable during the last month prior to the termination or expiration) through the date of Lessee’s complete removal of all such items. During the period of such removal and clean-up, all terms and conditions of this Lease, including, the indemnity and insurance provisions shall continue in full force and effect. If Lessee elects not to remove all of the Tank Farm Assets and Improvements from the Premises on or before the Removal Date, and provided that such facilities are in good working condition at the expiration of the Term (ordinary wear and tear excepted) then, such Tank Farm Assets and Improvements shall be deemed permanently abandoned to Lessor’s sole ownership, and Lessor may remove and dispose of such facilities in any manner which Lessor may deem appropriate, without any liability whatsoever to Lessee. If Lessee elects not to remove all of the Tank Farm Assets and Improvements from the Premises on or before the Removal Date and such facilities are not in good working condition at the expiration of the term (ordinary wear and tear excepted), or Lessee fails to so remove any or all of the Tank Farm Assets and Improvements from the Premises before the Removal Date, then, in addition to all rights and remedies available at law or in equity, without any prior notice, Lessor may (but shall be under no obligation), at Lessor’s option, deem such Tank Farm Assets and Improvements to be permanently abandoned to Lessor’s sole ownership, and Lessor may remove and dispose of such facilities in any manner which Lessor may deem appropriate, without any liability whatsoever to Lessee, and Lessee shall reimburse Lessor for all costs of such removal and disposal upon demand from Lessor. If requested by Lessor, Lessee shall execute any and all documents necessary to evidence that title to the Tank Farm Assets and Improvements that Lessee does not remove by the Removal Date is in Lessor and to extinguish and remove any cloud or potential cloud on the title to the Premises and/or such facilities created by Lessee.

  • Maintenance Repairs Utility Installations Trade Fixtures and Alterations 7.1 Lessee's Obligations.

Time is Money Join Law Insider Premium to draft better contracts faster.