Common use of Inspection/Testing Clause in Contracts

Inspection/Testing. In order to assess Seller’s work quality, conformance with Buyer’s specifications and compliance with this Order, including but not limited to Seller’s representations, warranties, certifications and covenants under this Order, upon reasonable notice by Buyer, all: (a) goods, materials and services related in any way to the goods and services purchased hereunder (including without limitation raw materials, components, intermediate assemblies, work in process, tools and end products) shall be subject to inspection and test by Buyer and its customer or representative at all times and places, including sites where the goods and services are created or performed, whether they are at premises of Seller, Seller’s suppliers or elsewhere; and (b) of Seller’s books and records relating to this Order shall be subject to inspection by Buyer. If any inspection, test, audit or similar oversight activity is made on Seller’s or its suppliers’ premises, Seller shall, without additional charge: (i) provide all reasonable access and assistance for the safety and convenience of the inspectors and (ii) take all necessary precautions and implement appropriate safety procedures for the safety of Buyer’s personnel while they are present on such premises. If Buyer’s personnel require medical attention on such premises, Seller will arrange for appropriate attention. If in Buyer’s opinion the safety of its personnel on such premises may be imperiled by local conditions, Buyer may remove some or all of its personnel from such premises, and Buyer shall have no responsibility for any resulting impact on Seller or its suppliers. If specific Buyer and/or Buyer’s customer tests, inspection and/or witness points are included in this Order, the goods shall not be shipped without an inspector’s release or a written waiver of test/inspection/witness with respect to each such point; however, Buyer shall not be permitted to unreasonably delay shipment; and Seller shall notify Buyer in writing at least twenty (20) days prior to each of Seller’s scheduled final and, if applicable, intermediate test/inspection/witness points. Buyer’s failure to inspect, accept, reject or detect defects by inspection shall neither relieve Seller from responsibility for such goods or services that are not in accordance with the Order requirements nor impose liabilities on Buyer.

Inspection/Testing. In order to assess Seller’s work quality, conformance with Buyer’s specifications and compliance with this Order, including but not limited to Seller’s representations, warranties, certifications and covenants under this Order, upon reasonable notice by Buyer, all: (a) goods, materials and services related in any way to the goods and services purchased hereunder (including without limitation raw materials, components, intermediate assemblies, work in process, tools and end products) shall be subject to inspection and test by Buyer and its customer or representative at all times and places, including sites where the goods and services are created or performed, whether they are at premises of Seller, Seller’s suppliers or elsewhere; and (b) of Seller’s books and records relating to this Order shall be subject to inspection by Buyer. If any inspection, test, audit or similar oversight activity is made on Seller’s or its suppliers’ premises, Seller shall, without additional charge: (i) provide all reasonable access and assistance for the safety and convenience of the inspectors and (ii) take all necessary precautions and implement appropriate safety procedures for the safety of Buyer’s personnel while they are present on such premises. If Buyer’s personnel require medical attention on such premises, Seller will arrange for appropriate attention. If in Buyer’s opinion the safety of its personnel on such premises may be imperiled by local conditions, Buyer may remove some or all of its personnel from such premises, and Buyer shall have no responsibility for any resulting impact on Seller or its suppliers. If specific Buyer and/or Buyer’s customer tests, inspection and/or witness points are included in this Order, the goods shall not be shipped without an inspector’s release or a written waiver of test/inspection/witness with respect to each such point; however, Buyer shall not be permitted to unreasonably delay shipment; and Seller shall notify Buyer in writing at least twenty (20) days prior to each of Seller’s scheduled final and, if applicable, intermediate test/test/ inspection/witness points. Buyer’s failure to inspect, accept, reject or detect defects by inspection shall neither relieve Seller from responsibility for such goods or services that are not in accordance with the Order requirements nor impose liabilities on Buyer.

Inspection/Testing. In order to assess SellerSupplier’s work quality, conformance with Buyer’s specifications and quality and/or compliance with this Order, including but not limited to Seller’s representations, warranties, certifications and covenants under this Order, upon reasonable notice by Buyer, all: (a) all goods, materials and services related in any way to the goods and services items purchased hereunder (including without limitation hereunder, including, raw materials, components, intermediate assemblies, work in process, tools and end products) products shall be subject to inspection and test testing by Buyer and Buyer, its customer customer, representative or representative regulatory authorities at all times and places, including sites where the goods and are made or located or the services are created or performed, whether they are at Supplier’s premises of Seller, Seller’s suppliers or elsewhere; and (b) all of SellerSupplier’s facilities, books and records relating to this Order shall be subject to inspection by Buyer. If any inspection, test, audit or similar oversight activity is made on Seller’s Buyer or its suppliers’ premises, Seller shall, without additional charge: (i) provide all reasonable access and assistance for the safety and convenience of the inspectors and (ii) take all necessary precautions and implement appropriate safety procedures for the safety of Buyer’s personnel while they are present on such premises. If Buyer’s personnel require medical attention on such premises, Seller will arrange for appropriate attention. If in Buyer’s opinion the safety of its personnel on such premises may be imperiled by local conditions, Buyer may remove some or all of its personnel from such premises, and Buyer shall have no responsibility for any resulting impact on Seller or its suppliersdesignee. If specific Buyer and/or Buyer’s customer tests, inspection and/or witness points are included in this Order, the goods shall not be shipped without an inspector’s release or a written waiver of test/inspection/witness with respect to each such point; however, Buyer shall not be permitted to unreasonably delay shipment; and Seller Supplier shall notify Buyer in writing at least twenty (20) days prior to each of SellerSupplier’s scheduled final and, if applicable, intermediate test/inspection/witness points. Supplier agrees to cooperate with such/audit inspection including, completing and returning questionnaires and making available its knowledgeable representatives. Buyer’s failure to inspectinspect or test goods, accept, materials or services or Buyer’s failure to reject or detect defects by inspection or testing shall neither not relieve Seller Supplier from responsibility for such goods its warranty obligations or services that are not any of its other obligations or responsibilities under this Order. Supplier agrees to provide small business as well as minority and/or women owned business utilization and demographic data upon request. 7. INSPEKTIONEN/PRÜFUNGEN UND QUALITÄT. 7.1 Inspektionen/Prüfungen. Im Hinblick auf die Bewertung der Arbeitsqualität des Lieferanten und/oder der Erfüllung dieser Bestellung durch den Lieferanten und nach Ankündigung durch den Xxxxxx innerhalb einer angemessenen Xxxxx: (a) unterliegen alle Waren, Materialien und Dienstleistungen im Zusammenhang mit den im Rahmen dieser Bestellung gekauften Positionen, einschliesslich Ausgangsmaterialien, Komponenten, Baugruppen, unfertiger Erzeugnisse, Werkzeugen und Endprodukten, der Inspektion und Prüfung durch den Xxxxxx, seinen Kunden, Vertreter oder Aufsichtsbehörden an xxxxx Xxxxx, einschliesslich der Standorte, an denen die Waren hergestellt werden oder sich befinden bzw. Dienstleistungen erbracht werden, unabhängig davon, ob es sich dabei um die Räumlichkeiten des Lieferanten oder um andere Orte handelt, und (b) unterliegen alle Einrichtungen, Xxxxxx und Aufzeichnungen des Lieferanten, die sich auf diese Bestellung beziehen, der Inspektion durch den Xxxxxx oder dessen beauftragten Vertreter. Falls spezielle Prüfungen, Inspektionen oder Kontrollpunkte des Käufers und/oder des Kunden des Käufers unter dieser Bestellung notwendig sind, dürfen die Waren nicht ohne Freigabe durch den Prüfer bzw. ohne eine schriftliche Verzichtserklärung in accordance with the Order requirements nor impose liabilities on BuyerBezug auf die Prüfung/Inspektion oder Kontrolle zu jedem derartigen Punkt verschickt werden, wobei es dem Xxxxxx jedoch nicht gestattet ist, eine Lieferung unangemessen zu verzögern. Der Lieferant wird den Xxxxxx mindestens zwanzig (20) Tage vor jeder geplanten endgültigen Prüfung/Inspektion oder Kontrolle und, sofern zutreffend, Zwischenprüfung/-inspektion/-kontrolle schriftlich davon in Kenntnis setzen. Der Lieferant verpflichtet sich, bei derartigen Inspektionen zu kooperieren, dabei eingeschlossen sind das Ausfüllen und die Rücksendung von Fragebögen und die Bereitstellung fachkundiger Vertreter des Lieferanten. Für den Fall, dass es der Xxxxxx unterlässt, Inspektionen oder Prüfungen der Ware, Materialien oder Dienstleistungen durchzuführen oder im Rahmen von Inspektionen oder Prüfungen Xxxxxx festzustellen oder zurückzuweisen, wird der Lieferant dadurch nicht von seinen Gewährleistungspflichten oder anderer Verpflichtungen oder Verantwortlichkeiten im Rahmen dieser Bestellung entbunden. Der Lieferant verpflichtet sich, auf Aufforderung, Angaben zur Hinzuziehung von in Besitz von Minderheiten und/oder Frauen befindlichen Unternehmen und weitere demographische Angaben bereitzustellen.

Inspection/Testing. In order to assess Seller’s work quality, . conformance with Buyer’s specifications and compliance with this Order, including but not limited to Seller’s representations, warranties, certifications and covenants under this Order, upon reasonable notice by Buyer, . all: (a) goods, materials and services related in any way to the goods and services purchased hereunder (including without limitation raw materials, . components, intermediate assemblies, work in process, tools and end products) shall be subject to inspection and test by Buyer and its customer or representative at all times and places, including sites where the goods and services are created or performed, whether they are at premises of Seller, . Seller’s suppliers or elsewhere; and (b) of Seller’s books and records relating to this Order shall be subject to inspection by Buyer. If any inspection, test, audit or similar oversight activity is made on Seller’s or its suppliers’ premises, . Seller shall, without additional charge: (i) provide all reasonable access and assistance for the safety and convenience of the inspectors and (ii) take all necessary precautions and implement appropriate safety procedures for the safety of Buyer’s personnel while they are present on such premises. If Buyer’s personnel require medical attention on such premises, . Seller will arrange for appropriate attention. If in Buyer’s opinion the safety of its personnel on such premises may be imperiled by local conditions, . Buyer may remove some or all of its personnel from such premises, and Buyer shall have no responsibility for any resulting impact on Seller or its suppliers. If specific Buyer and/or Buyer’s customer tests, inspection and/or witness points are included in this Order, the goods shall not be shipped without an inspector’s release or a written waiver of test/inspection/witness with respect to each such point; however, Buyer shall not be permitted to unreasonably delay shipment; and Seller shall notify Buyer in writing at least twenty (20) days prior to each of Seller’s scheduled final and, if applicable, intermediate test/inspection/witness points. Buyer’s failure to inspect, accept, reject or detect defects by inspection shall neither relieve Seller from responsibility for such goods or services that are not in accordance with the Order requirements nor impose liabilities on Buyer.

Inspection/Testing. In order to assess Seller’s work quality, conformance with Buyer’s specifications and compliance with this Order, including but not limited to Seller’s representations, warranties, certifications and covenants under this Order, upon reasonable notice by Buyer, all: (a) goods, materials and services related in any way to the goods and services purchased hereunder (including without limitation raw materials, components, intermediate assemblies, work in process, tools and end products) shall be subject to inspection and test by Buyer and its customer or representative at all times and places, including sites where the goods and services are arc created or performed, whether they are at arc al premises of Seller, Seller’s suppliers or elsewhere; and (b) of Seller’s books and records relating to this Order shall be subject to inspection by Buyer. If any inspection, test, audit or similar oversight activity is made on Seller’s or its suppliers’ premises, Seller shall, without additional charge: (i) provide all al! reasonable access and assistance for the safety safely and convenience of the inspectors and (ii) take all necessary precautions and implement appropriate safety procedures for the safety of Buyer’s personnel while they are present on such premises. If Buyer’s personnel require medical attention on such premises, Seller will arrange for appropriate attention. , If in Buyer’s opinion the safety of its personnel on such premises may be imperiled by local conditions, Buyer may remove some or all of its personnel from such premises, and Buyer shall have no responsibility for any resulting impact on Seller or its suppliers. If specific Buyer and/or Buyer’s customer tests, inspection and/or witness points are included in this Order, the goods shall not be shipped without an inspector’s release or a written waiver of test/inspection/witness with respect to each such point; however, Buyer shall not be permitted to unreasonably delay shipment; and Seller shall notify Buyer in writing at least twenty (20) days prior to each of Seller’s scheduled final and, if applicable, intermediate test/inspection/witness points. Buyer’s failure to inspect, accept, reject or detect defects by inspection shall neither relieve Seller from responsibility for such goods or services that are not in accordance with the Order requirements nor impose liabilities on Buyer.

Inspection/Testing. In order to assess Seller’s work quality, conformance with Buyer’s specifications and compliance with this Order, including but not limited to Seller’s representations, warranties, certifications and covenants under this Order, upon reasonable notice by Buyer, all: ; (a) goods, materials and services related in any way to the goods and services purchased hereunder (including without limitation raw materials, components, intermediate assemblies, work in process, tools and end products) shall be subject to inspection and test by Buyer and its customer or representative at all times and places, including sites where the goods and services are created or performed, whether they are at premises of Seller, Seller’s suppliers or elsewhere; and (b) of Seller’s books and records relating to this Order shall be subject to inspection by Buyer. If any inspection, test, audit or similar oversight activity is made on Seller’s or its suppliers’ premises, Seller shall, without additional charge: (i) provide all reasonable access and assistance for the safety safely and convenience of the inspectors and (ii) take all necessary precautions and implement appropriate safety procedures for the safety of Buyer’s personnel while they are present on such premises. If Buyer’s personnel require medical attention on such premises, Seller will arrange for appropriate attention. If in Buyer’s opinion the safety of its personnel on such premises may be imperiled by local conditions, Buyer may remove some or all of its personnel from such premises, and Buyer shall have no responsibility for any resulting impact on Seller or its suppliers. If specific Buyer and/or Buyer’s customer tests, inspection and/or witness points are included in this Order, the goods shall not be shipped without an inspector’s release or a written waiver of test/inspection/witness with respect to each such point; however, Buyer shall not be permitted to unreasonably delay shipment; and Seller shall notify Buyer in writing at least twenty (20) days prior to each of Seller’s scheduled final and, if applicable, intermediate test/inspection/witness points. Buyer’s failure to inspect, accept, reject or detect defects by inspection shall neither relieve Seller from responsibility for such goods or services that are not in accordance with the Order requirements nor impose liabilities on Buyer.

Inspection/Testing. In order to assess Seller’s work quality, conformance with Buyer’s specifications and compliance with this Order, including but not limited to Seller’s representations, warranties, certifications and covenants under this Order, upon reasonable notice by Buyer, all: (a) goods, materials and services related in any way to the goods and services purchased hereunder (including without limitation raw materials, components, intermediate assemblies, work in process, tools and end products) shall be subject to inspection and test by Buyer and its customer or representative at all times and places, including sites where the goods and services are created or performed, whether they are at premises of Seller, Seller’s suppliers or elsewhere; and (b) of Seller’s books and records relating to this Order shall be subject to inspection by Buyer. If any inspection, test, audit or similar oversight activity is made on Seller’s or its suppliers’ premises, Seller shall, without additional charge: (i) provide all reasonable access and assistance for the safety and convenience of the inspectors and (ii) take all necessary precautions and implement appropriate safety procedures for the safety of Buyer’s personnel while they are present on such premises. If Buyer’s personnel require medical attention on such premises, Seller will arrange for appropriate attention. If in Buyer’s opinion the safety of its personnel on such premises may be imperiled by local conditions, . Buyer may remove some or all of its personnel from such premises, and Buyer shall have no responsibility for any resulting impact on Seller or its suppliers. If specific Buyer and/or Buyer’s customer tests, inspection and/or witness points are included in this Order, the goods shall not be shipped without an inspector’s release or a written waiver of test/inspection/witness with respect to each such point; however, . Buyer shall not be permitted to unreasonably delay shipment; and Seller shall notify Buyer in writing at least twenty (20) days prior to each of Seller’s scheduled final and, if applicable, intermediate test/inspection/witness points. Buyer’s failure to inspect, accept, reject or detect defects by inspection shall neither relieve Seller from responsibility for such goods or services that are not in accordance with the Order requirements nor impose liabilities on Buyer.

Inspection/Testing. In order to assess Seller’s work quality, conformance with Buyer’s specifications and compliance with this Order, including but not limited to Seller’s representations, warranties, certifications and covenants under this Order, upon reasonable notice by Buyer, all: (a) goods, materials and services related in any way to the All goods and services purchased ordered hereunder (including without limitation raw materials, components, intermediate assemblies, work in process, tools and end products) shall will be subject to inspection and test by Buyer and its customer or representative to the extent practicable at all times and places, including sites where the period of manufacture and in any event prior to acceptance. Seller agrees to permit access to Seller’s facilities at all reasonable times for inspection of goods by Buyer’s agents or employees and will provide all tools, facilities and assistance reasonably necessary for such inspection at no additional cost to Buyer. Such goods will be subject to final inspection and acceptance by Buyer after delivery to Buyer. It is expressly agreed that neither inspections nor payments prior to delivery will constitute final acceptance. If the goods delivered do not meet the specifications agreed to by Buyer, or otherwise do not conform with the requirements of the Terms, Buyer shall have the right to reject such goods. If Buyer rejects any portion of the goods, Buyer has the right, effective upon written notice to Seller, to: (a) rescind the applicable Purchase Order in its entirety; (b) accept the goods at a reasonably reduced price; or (c) reject the goods and services are created or performed, whether they are at premises require replacement of Seller, Seller’s suppliers or elsewhere; and (b) of Seller’s books and records relating to this Order shall be subject to inspection by Buyerthe rejected goods. If any inspection, test, audit or similar oversight activity is made on Seller’s or its suppliers’ premisesBuyer requires replacement of the goods, Seller shall, without additional charge: (i) provide at its expense, promptly replace the nonconforming or defective goods and pay for all reasonable access related expenses, including, but not limited to, unpacking, examining and assistance repacking such goods, transportation charges for the safety and convenience return of the inspectors defective goods and (ii) take all necessary precautions the delivery of replacement goods. If Seller fails to timely deliver replacement goods, Xxxxx may replace them with goods from a third party and implement appropriate safety procedures charge Seller the cost thereof and terminate the Purchase Order for the safety of cause. Goods which have been delivered and rejected in whole or in part may, at Buyer’s personnel while they option, be returned to Seller or held for disposition at Seller’s risk and expense. In the event Buyer receives goods the defects or nonconformity of which are present not apparent on such premises. If examination, Buyer reserves the right to require replacement, as well as payment of damages, upon Buyer’s personnel require medical attention on such premises, discovery of the defects or nonconformity. Nothing contained in this Purchase Order shall relieve the Seller will arrange for appropriate attention. If in Buyer’s opinion any way from the safety obligations of its personnel on such premises may be imperiled by local conditions, Buyer may remove some or all of its personnel from such premises, and Buyer shall have no responsibility for any resulting impact on Seller or its suppliers. If specific Buyer and/or Buyer’s customer teststesting, inspection and/or witness points are included in this Order, the goods shall not be shipped without an inspector’s release or a written waiver of test/inspection/witness with respect to each such point; however, Buyer shall not be permitted to unreasonably delay shipment; and Seller shall notify Buyer in writing at least twenty (20) days prior to each of Seller’s scheduled final and, if applicable, intermediate test/inspection/witness points. Buyer’s failure to inspect, accept, reject or detect defects by inspection shall neither relieve Seller from responsibility for such goods or services that are not in accordance with the Order requirements nor impose liabilities on Buyerquality control.

Inspection/Testing. In order to assess SellerSupplier’s work quality, conformance with Buyer’s specifications and quality and/or compliance with this Order, including but not limited to Seller’s representations, warranties, certifications and covenants under this Order, upon reasonable notice by Buyer, all: (a) all goods, materials and services related in any way to the goods and services items purchased hereunder (including without limitation hereunder, including, raw materials, components, intermediate assemblies, work in process, tools and end products) products shall be subject to inspection and test testing by Buyer and Buyer, its customer customer, representative or representative regulatory authorities at all times and places, including sites where the goods and are made or located or the services are created or performed, whether they are at Supplier’s premises of Seller, Seller’s suppliers or elsewhere; and (b) all of SellerSupplier’s facilities, books and records relating to this Order shall be subject to inspection by Buyer. If any inspection, test, audit or similar oversight activity is made on Seller’s Buyer or its suppliers’ premises, Seller shall, without additional charge: (i) provide all reasonable access and assistance for the safety and convenience of the inspectors and (ii) take all necessary precautions and implement appropriate safety procedures for the safety of Buyer’s personnel while they are present on such premises. If Buyer’s personnel require medical attention on such premises, Seller will arrange for appropriate attention. If in Buyer’s opinion the safety of its personnel on such premises may be imperiled by local conditions, Buyer may remove some or all of its personnel from such premises, and Buyer shall have no responsibility for any resulting impact on Seller or its suppliersdesignee. If specific Buyer and/or Buyer’s customer tests, inspection and/or witness points are included in this Order, the goods shall not be shipped without an inspector’s release or a written waiver of test/inspection/witness with respect to each such point; however, Buyer shall not be permitted to unreasonably delay shipment; and Seller Supplier shall notify Buyer in writing at least twenty (20) days prior to each of SellerSupplier’s scheduled final and, if applicable, intermediate test/inspection/witness points. Supplier agrees to cooperate with such/audit inspection including, completing and returning questionnaires and making available its knowledgeable representatives. Buyer’s failure to inspectinspect or test goods, accept, materials or services or Buyer’s failure to reject or detect defects by inspection or testing shall neither not relieve Seller Supplier from responsibility for such goods its warranty obligations or any of its other obligations or responsibilities under this Order. Supplier agrees to provide small business as well as minority and/or women owned business utilization and demographic data upon request. 7. ACCES AUX LOCAUX, INSPECTION ET QUALITE. 7.1 Inspection / Contrôles. Afin que la qualité du travail du Fournisseur et le respect par le Fournisseur des engagements souscrits au titre de la Commande puissent être vérifiés, après préavis raisonnable notifié par l’Acheteur : (a) tous les marchandises, matériels et prestations en lien avec les biens et les services, y compris les matières premières, les pièces détachées, les montages intermédiaires, le travail en cours, les outils et les produits finis, pourront être inspectés et testés par l'Acheteur, le Client Final ou son représentant, ou les autorités réglementaires, en tout lieu, y compris sur xxx xxxxx de fabrication ou de localisation des biens ou de prestation des services, que ces lieux se trouvent chez le Fournisseur ou en tout autre endroit ; et (b) les livres et registres des établissements du Fournisseur relatifs à cette Commande pourront être inspectés par l’Acheteur ou toute personne qu’il désignera. Si la Commande inclut des points d’inspection spécifiques par l’Acheteur et/ou par le Client Final, les biens ne seront pas expédiés sans une autorisation d’une personne chargée de l’inspection ou sans sa renonciation écrite à procéder à une telle inspection. Toutefois, l’Acheteur ne sera pas autorisé à retarder l’expédition sans motif valable; et le Fournisseur avisera par écrit l’Acheteur au moins vingt (20) jours avant chacun des points d’inspection finaux et, le cas échéant, intermédiaires, prévus. Le Fournisseur s’engage à coopérer xxxxxx ces inspections ou audits, notamment en complétant et retournant les questionnaires et en mettant à disposition des représentants qualifiés. Le fait pour l’Acheteur de ne pas inspecter ou contrôler les biens et/ou services that are not in accordance with the Order requirements nor impose liabilities on Buyerou de ne pas rejeter ou détecter de défauts lors de l’inspection ne dégage pas le Fournisseur de ses responsabilités au titre de la Commande. Le Fournisseur accepte de fournir les données démographiques ou portant sur les activités aux petites entreprises et/ou sur l’utilisation d’entreprises détenues par des femmes.

Inspection/Testing. In order to assess Seller’s work quality, conformance with Buyer’s specifications and compliance with this Order, including but not limited to Seller’s representations, warranties, certifications and covenants under this Order, upon reasonable notice by Buyer, all: (a) goods, materials and services related in any way to the goods and services purchased hereunder (including without limitation raw materials, components, intermediate assemblies, work in process, tools and end products) shall be subject to inspection and test by Buyer and its customer or representative at all times and places, including sites where the goods and services are created or performed, whether they are at premises of Seller, Seller’s suppliers or elsewhere; and (b) of Seller’s books and records relating to this Order shall be subject to inspection by Buyer. If any inspection, test, audit or similar oversight activity is made on Seller’s or its suppliers’ premises, Seller shall, without additional charge: (i) provide all reasonable access and assistance for the safety and convenience of the inspectors and (ii) take all necessary precautions and implement appropriate safety procedures for the safety of Buyer’s personnel while they are present on such premises. If Buyer’s personnel require medical attention on such premises, Seller will arrange for appropriate attention. If in Buyer’s opinion the safety of its personnel on such premises may be imperiled by local conditions, . Buyer may remove some or all of its personnel from such premises, and Buyer shall have no responsibility for any resulting impact on Seller or its suppliers. If specific Buyer and/or Buyer’s customer tests, inspection and/or witness points are included in this Order, the goods shall not be shipped without an inspector’s release or a written waiver of test/inspection/witness with respect to each such point; however, . Buyer shall not be permitted to unreasonably delay shipment; and Seller shall notify Buyer in writing at least twenty (20) days prior to each of Seller’s scheduled final and, if applicable, intermediate test/inspection/witness points. Buyer’s failure to CERTAIN IDENTIFIED INFORMATION HAS BEEN EXCLUDED FROM THE EXHIBIT BECAUSE IT IS BOTH NOT MATERIAL AND WOULD LIKELY CAUSE COMPETITIVE HARM TO THE REGISTRANT IF PUBLICLY DISCLOSED. inspect, accept, reject or detect defects by inspection shall neither relieve Seller from responsibility for such goods or services that are not in accordance with the Order requirements nor impose liabilities on Buyer.

Inspection/Testing. In order to assess SellerSupplier’s work quality, conformance with Buyer’s specifications and quality and/or compliance with this Order, including but not limited to Seller’s representations, warranties, certifications and covenants under this Order, upon reasonable notice by Buyer, all: (a) all goods, materials and services related in any way to the goods and services items purchased hereunder (including without limitation hereunder, including, raw materials, components, intermediate assemblies, work in process, tools and end products) products shall be subject to inspection and test testing by Buyer and Buyer, its customer customer, representative or representative regulatory authorities at all times and places, including sites where the goods and are made or located or the services are created or performed, whether they are at Supplier’s premises of Seller, Seller’s suppliers or elsewhere; and (b) all of SellerSupplier’s facilities, books and records relating to this Order shall be subject to inspection by Buyer. If any inspection, test, audit or similar oversight activity is made on Seller’s Buyer or its suppliers’ premises, Seller shall, without additional charge: (i) provide all reasonable access and assistance for the safety and convenience of the inspectors and (ii) take all necessary precautions and implement appropriate safety procedures for the safety of Buyer’s personnel while they are present on such premises. If Buyer’s personnel require medical attention on such premises, Seller will arrange for appropriate attention. If in Buyer’s opinion the safety of its personnel on such premises may be imperiled by local conditions, Buyer may remove some or all of its personnel from such premises, and Buyer shall have no responsibility for any resulting impact on Seller or its suppliersdesignee. If specific Buyer and/or Buyer’s customer tests, inspection and/or witness points are included in this Order, the goods shall not be shipped without an inspector’s release or a written waiver of test/inspection/witness with respect to each such point; however, Buyer shall not be permitted to unreasonably delay shipment; and Seller Supplier shall notify Buyer in writing at least twenty (20) days prior to each of SellerSupplier’s scheduled final and, if applicable, intermediate test/inspection/witness points. Supplier agrees to cooperate with such/audit inspection including, completing and returning questionnaires and making available its knowledgeable representatives. Buyer’s failure to inspectinspect or test goods, accept, materials or services or Buyer’s failure to reject or detect defects by inspection or testing shall neither not relieve Seller Supplier from responsibility for such goods its warranty obligations or services that are not in accordance with the Order requirements nor impose liabilities on Buyerany of its other obligations or responsibilities under this Order. Supplier agrees to provide small business as well as minority and/or women owned business utilization and demographic data upon request. 7. PEMERIKSAAN/PENGUJIAN XXX KUALITAS 7.1 Inspeksi/Pengujian. Inspeksi / Pengujian. Untuk menilai kualitas kerja Pemasok xxx / atau kepatuhan terhadap Pesanan ini, dengan pemberitahuan yang wajar oleh Pembeli: (a) semua barang, bahan, xxx xxxx xxxx terkait dengan barang yang dibeli di bawah ini, termasuk, bahan mentah, komponen, rakitan, sedang dalam proses, alat xxx produk akhir harus menjalani pemeriksaan xxx pengujian oleh Pembeli, pelanggannya, perwakilan atau otoritas pengaturnya di semua tempat, termasuk lokasi di mana barang dibuat atau berada atau jasa dilakukan, baik di lokasi Pemasok atau di tempat lain; xxx (b) semua fasilitas, pembukuan, xxx catatan Pemasok yang berkaitan dengan Pesanan ini harus diperiksa oleh Pembeli atau pihak yang ditunjuk. Jika pengujian, inspeksi xxx / atau poin saksi Pembeli xxx / atau Pembeli tertentu disertakan dalam Pesanan ini, barang tidak akan dikirim tanpa rilis inspektur atau pengesampingan tertulis dari pengujian / inspeksi / saksi sehubungan dengan masing- masing poin tersebut; namun, Xxxxxxx tidak diizinkan untuk menunda pengiriman secara tidak wajar; xxx Pemasok harus memberi tahu Pembeli secara tertulis setidaknya dua puluh (20) hari sebelum masing-masing poin final yang dijadwalkan dari Pemasok xxx, jika berlaku, poin pengujian / inspeksi / saksi perantara. Xxxxxxx setuju untuk bekerja sama dengan inspeksi / audit tersebut termasuk, mengisi xxx mengembalikan kuesioner xxx menyediakan perwakilannya yang berpengetahuan. Kegagalan Pembeli untuk memeriksa atau menguji barang, bahan, atau jasa atau kegagalan Pembeli untuk menolak atau mendeteksi cacat dengan inspeksi atau pengujian tidak akan membebaskan Pemasok dari kewajiban garansi atau kewajiban atau tanggung jawab lainnya berdasarkan Pesanan ini. Pemasok setuju untuk menyediakan data pemanfaatan xxx demografis bisnis kecil serta minoritas xxx / atau milik perempuan berdasarkan permintaan.

Inspection/Testing. In order to assess Seller’s work quality, conformance with Buyer’s specifications and compliance with this Order, including but not limited to Seller’s representations, warranties, certifications and covenants under this Order, upon reasonable notice by Buyer, all: (a) goods, materials and services related in any way to the goods and services purchased hereunder (including without limitation raw materials, components, intermediate assemblies, work in process, tools and end products) shall be subject to inspection and test by Buyer and its customer or representative at all times and places, including sites where the goods and services are created or performed, whether they are at premises of Seller, Seller’s suppliers or elsewhere; and (b) of Seller’s books and records relating to this Order shall be subject to inspection by BuyerXxxxx. If any inspection, test, audit or similar oversight activity is made on Seller’s or its suppliers’ premises, Seller shall, without additional charge: (i) provide all reasonable access and assistance for the safety and convenience of the inspectors and (ii) take all necessary precautions and implement appropriate safety procedures for the safety of Buyer’s personnel while they are present on such premises. If Buyer’s personnel require medical attention on such premises, Seller will arrange for appropriate attention. If in Buyer’s opinion the safety of its personnel on such premises may be imperiled imperilled by local conditions, Buyer may remove some or all of its personnel from such premises, and Buyer shall have no responsibility for any resulting impact on Seller or its suppliers. If specific Buyer and/or Buyer’s customer tests, inspection and/or witness points are included in this Order, the goods shall not be shipped without an inspector’s release or a written waiver of test/inspection/witness with respect to each such point; however, Buyer shall not be permitted to unreasonably delay shipment; and Seller shall notify Buyer in writing at least twenty (20) days prior to each of Seller’s scheduled final and, if applicable, intermediate test/inspection/witness points. Buyer’s failure to inspect, accept, reject or detect defects by inspection shall neither relieve Seller from responsibility for such goods or services that are not in accordance with the Order requirements nor impose liabilities on Buyer.

Inspection/Testing. In order to assess Seller’s work quality, conformance with Buyer’s specifications and compliance with this Order, including but not limited to Seller’s representations, warranties, certifications and covenants under this Order, upon reasonable notice by Buyer, all: (a) goods, materials and services related in any way to the goods and services purchased hereunder (including without limitation raw materials, components, intermediate assemblies, work in process, tools and end products) shall be subject to inspection and test by Buyer and its customer or representative at all times and places, including sites where the goods and services are created or performed, whether they are at premises of Seller, Seller’s suppliers or elsewhere; and (b) of Seller’s books and records relating to this Order shall be subject to inspection by Buyer. If any inspection, test, audit or similar oversight activity is made on Seller’s or its suppliers’ premises, Seller shall, without additional charge: (i) provide all reasonable access and assistance for the safety and convenience of the inspectors and (ii) take all necessary precautions and implement appropriate safety procedures for the safety of Buyer’s personnel while they are present on such premises. If Buyer’s personnel require medical attention on such premises, Seller will arrange for appropriate attention. If I f in Buyer’s opinion the safety of its personnel on such premises may be imperiled by local conditions, Buyer may remove some or all of its personnel from such premises, and Buyer shall have no responsibility for any resulting impact on Seller or its suppliers. If specific Buyer and/or Buyer’s customer tests, inspection and/or witness points are included in this Order, the goods shall not be shipped without an inspector’s release or a written waiver of test/inspection/witness with respect to each such point; however, Buyer shall not be permitted to unreasonably delay shipment; and Seller shall notify Buyer in writing at least twenty (20) days prior to each of Seller’s scheduled final and, if applicable, intermediate test/inspection/witness points. Buyer’s failure to inspect, accept, reject or detect defects by inspection shall neither relieve rel ieve Seller from responsibility for such goods or services that are not in accordance with the Order requirements nor impose liabilities on Buyer.