Inspection of Drawings Sample Clauses

Inspection of Drawings. ‌ Seller shall maintain and provide to Buyer’s Representative from time to time or upon request a complete list of drawings identifying which is approved for construction. Buyer shall have the right at all reasonable times to inspect all drawings of any part of the Work.
Sample 1Sample 2Sample 3See All (6)
AutoNDA by SimpleDocs
Inspection of Drawings. Contractor shall maintain and provide to Company’s Representative from time to time or upon request a complete list of Contractor Drawings and Manuals identifying which drawings are approved for construction. Company shall have the right at all reasonable times to inspect all drawings of any part of the Work.
Sample 1Sample 2
Inspection of Drawings. The Engineer shall have the right at all reasonable times to inspect all drawings and other information relating to any part of the Works.
Sample 1Sample 2
Inspection of Drawings. Before filling in the Tender, the Tendered will have to check up all Drawings and Schedule of Quantities, and will have to get an immediate clarification from the Architect/Consultant on any point that he feels is vague or uncertain. No claim nor damages or compensation will be entertained on this account.
Sample 1Sample 2
Inspection of Drawings. Developer shall maintain and provide to PacifiCorp’s Representative from time to time or upon request of PacifiCorp’s Representative a complete list of drawings, identifying which are approved for construction. PacifiCorp and PacifiCorp’s Representatives shall have the right at all reasonable times to inspect all drawings of any part of the Work.
Sample 1Sample 2
Inspection of Drawings. In addition to the inspection of drawings to be performed at the time of the Gateway Design Review, the Engineer shall have the right at all reasonable times to inspect all drawings of any part of the System.
Sample 1
Inspection of Drawings. Developer shall maintain and provide to PacifiCorp’s Representative from time to time or upon request of PacifiCorp’s Representative a complete list of drawings, identifying which are approved for construction. PacifiCorp and PacifiCorp’s Representatives shall have the right at all reasonable times to inspect all drawings of any part of the Work. Operating and Maintenance Instructions. Not less than six (6) months prior to the scheduled Substantial Completion Date, Developer shall deliver to PacifiCorp’s Representative one (1) set of preliminary operating and maintenance manuals sufficiently complete that the Facility, including the Equipment, may be safely commissioned and PacifiCorp’s personnel properly trained pursuant to Section 7.10. Developer shall, at its sole cost and expense, continuously update such manuals so that, as of three (3) months prior to the scheduled Substantial Completion Date, such operating and maintenance manuals are substantively in their final form with any amendments made as necessary. Not less than three (3) months prior to the scheduled Substantial Completion Date, Developer shall supply to PacifiCorp three (3) copies of final operation and maintenance manuals, startup and shutdown manuals and the then current drawings of the Work as-built , in accordance with Appendix F and Appendix G. All operating and maintenance manuals, startup and shutdown manuals and drawings of the Work as-built shall be in such detail as will enable PacifiCorp to operate, maintain, dismantle, reassemble, adjust and repair all parts of the Work, as described in Appendix F and Appendix G. Where this Agreement is terminated before the Substantial Completion Date (other than as a result of a PacifiCorp Default), Developer shall provide to PacifiCorp such information including copy drawings and Draft Manuals as is reasonable and as is necessary for PacifiCorp to complete, use and maintain the Work. The provision by Developer of the final operation and maintenance manuals and drawings of the Work as-built in accordance with the provisions of this Section 15.5 shall be identified as a Milestone in Appendix B and the provisions of article 10 shall apply.
Sample 1
AutoNDA by SimpleDocs

Related to Inspection of Drawings

  • Approved Working Drawings The Final Working Drawings shall be approved by Landlord (the “Approved Working Drawings”) prior to the commencement of construction of the Premises by Tenant. After approval by Landlord of the Final Working Drawings, Tenant may submit the same to the appropriate municipal authorities for all applicable building permits. Tenant hereby agrees that neither Landlord nor Landlord’s consultants shall be responsible for obtaining any building permit or certificate of occupancy for the Premises and that obtaining the same shall be Tenant’s responsibility; provided, however, that Landlord shall cooperate with Tenant in executing permit applications and performing other ministerial acts reasonably necessary to enable Tenant to obtain any such permit or certificate of occupancy. No changes, modifications or alterations in the Approved Working Drawings may be made without the prior written consent of Landlord, which consent may not be unreasonably withheld.

  • Selection of Architect/Construction Drawings Tenant shall retain the architect/space planner designated by Tenant and reasonably approved by Landlord (the “Architect”) to prepare the “Construction Drawings,” as that term is defined in this Section 3.2. Tenant shall retain the engineering consultants selected by Tenant (the “Engineers”) to prepare all plans and engineering working drawings relating to the structural, mechanical, electrical, plumbing, HVAC, life safety, and sprinkler work in the Premises, which work is not part of the Base Building. The plans and drawings to be prepared by Architect and the Engineers hereunder shall be known collectively as the “Construction Drawings.” All Construction Drawings shall comply with the drawing format and specifications reasonably determined by Landlord, and shall be subject to Landlord’s approval. Tenant and Architect shall verify, in the field, the dimensions and conditions as shown on the relevant portions of the base building plans, and Tenant and Architect shall be solely responsible for the same, and Landlord shall have no responsibility in connection therewith. Landlord’s review of the Construction Drawings as set forth in this Section 3, shall be for its sole purpose and shall not imply Landlord’s review of the same, or obligate Landlord to review the same, for quality, design, Code compliance or other like matters. Accordingly, notwithstanding that any Construction Drawings are reviewed by Landlord or its space planner, architect, engineers and consultants, and notwithstanding any advice or assistance which may be rendered to Tenant by Landlord or Landlord’s space planner, architect, engineers, and consultants, Landlord shall have no liability whatsoever in connection therewith and shall not be responsible for any omissions or errors contained in the Construction Drawings, and Tenant’s waiver and indemnity set forth in the Lease shall specifically apply to the Construction Drawings.

  • Working Drawings Not later than 15 business days following the approval of the TI Design Drawings by Landlord, Tenant shall cause the TI Architect to prepare and deliver to Landlord for review and comment construction plans, specifications and drawings for the Tenant Improvements (“TI Construction Drawings”), which TI Construction Drawings shall be prepared substantially in accordance with the TI Design Drawings. Tenant shall be solely responsible for ensuring that the TI Construction Drawings reflect Tenant’s requirements for the Tenant Improvements. Landlord shall deliver its written comments on the TI Construction Drawings to Tenant not later than 10 business days after Landlord’s receipt of the same; provided, however, that Landlord may not disapprove any matter that is consistent with the TI Design Drawings. Tenant and the TI Architect shall consider all such comments in good faith and shall, within 10 business days after receipt, notify Landlord how Tenant proposes to respond to such comments. Any disputes in connection with such comments shall be resolved in accordance with Section 2(d) hereof. Provided that the design reflected in the TI Construction Drawings is consistent with the TI Design Drawings, Landlord shall approve the TI Construction Drawings submitted by Tenant. Once approved by Landlord, subject to the provisions of Section 4 below, Tenant shall not materially modify the TI Construction Drawings except as may be reasonably required in connection with the issuance of the TI Permit (as defined in Section 3(a) below).

  • Construction Drawings After approving the Additional Programming Information, Landlord shall cause the Architect and the Engineers to prepare and deliver to Tenant Construction Drawings that conform to the approved Space Plan and the approved Additional Programming Information. Such preparation and delivery shall occur within 15 business days after the later of Landlord’s approval of the Additional Programming Information or the mutual execution and delivery of this Agreement. Tenant shall approve or disapprove the Construction Drawings by notice to Landlord. If Tenant disapproves the Construction Drawings, Tenant’s notice of disapproval shall specify any revisions Tenant desires in the Construction Drawings. After receiving such notice of disapproval, Landlord shall cause the Architect and/or the Engineers to revise the Construction Drawings, taking into account the reasons for Tenant’s disapproval (provided, however, that Landlord shall not be required to cause the Architect or the Engineers to make any revision to the Construction Drawings that is inconsistent with the Landlord Requirements or that Landlord otherwise reasonably disapproves), and resubmit the Construction Drawings to Tenant for its approval. Such revision and resubmission shall occur within five (5) business days after the later of Landlord’s receipt of Tenant’s notice of disapproval or the mutual execution and delivery of this Agreement if such revision is not material, and within such longer period of time as may be reasonably necessary (but not more than 15 business days after the later of such receipt or such mutual execution and delivery) if such revision is material. Such procedure shall be repeated as necessary until Tenant has approved the Construction Drawings. The Construction Drawings approved by Landlord and Tenant are referred to in this Work Letter as the “Approved Construction Drawings”.

  • Final Working Drawings After the Final Space Plan has been approved by Landlord, Tenant shall supply the Engineers with a complete listing of standard and non-standard equipment and specifications, including, without limitation, Title 24 calculations, electrical requirements and special electrical receptacle requirements for the Premises, to enable the Engineers and the Architect to complete the “Final Working Drawings” (as that term is defined below) in the manner as set forth below. Upon the approval of the Final Space Plan by Landlord and Tenant, Tenant shall promptly cause the Architect and the Engineers to complete the architectural and engineering drawings for the Premises, and Architect shall compile a fully coordinated set of architectural, structural, mechanical, electrical and plumbing working drawings in a form which is sufficiently complete to allow all of Tenant’s Agents to bid on the work and to obtain all applicable permits (collectively, the ‘‘Final Working Drawings”) and shall submit the same to Landlord for Landlord’s approval, which shall not be unreasonably withheld, conditioned, or delayed. Tenant shall supply Landlord with four (4) copies signed by Tenant of such Final Working Drawings, Landlord shall not unreasonably withhold, condition, or delay its approval of the Final Working Drawings. Landlord shall approve or reasonably EXHIBIT A disapprove of the Final Working Drawings within ten (10) business days after Landlord’s receipt thereof. If Landlord reasonably withholds its approval, Landlord shall provide Tenant with the specific reasons therefor.

  • Delivery of Documents; Delivery Dates (a) The Trustee is hereby directed (i) to execute and deliver the Intercreditor Agreement, the Escrow Agreement and the NPA on or prior to the Issuance Date, each in the form delivered to the Trustee by the Company, and (ii) subject to the respective terms thereof, to perform its obligations thereunder. Upon request of the Company and the satisfaction or waiver of the closing conditions specified in the Underwriting Agreement, the Trustee shall execute, deliver, authenticate, issue and sell Applicable Certificates in authorized denominations equaling in the aggregate the amount set forth, with respect to the Applicable Trust, in Schedule I to the Underwriting Agreement evidencing the entire ownership interest in the Applicable Trust, which amount equals the maximum aggregate principal amount of Equipment Notes which may be purchased by the Trustee pursuant to the NPA. Except as provided in Sections 3.03, 3.04, 3.05 and 3.06 of the Basic Agreement, the Trustee shall not execute, authenticate or deliver Applicable Certificates in excess of the aggregate amount specified in this paragraph. The provisions of this Section 5.01(a) supersede and replace the first sentence of Section 3.02(a) of the Basic Agreement, with respect to the Applicable Trust.

  • Inspections; Appraisals (a) Permit Agent from time to time, subject (except when a Default or Event of Default exists) to reasonable notice and normal business hours, to visit and inspect the Properties of any Borrower or Subsidiary, inspect, audit and make extracts from any Borrower’s or Subsidiary’s books and records, and discuss with its officers, employees, agents, advisors and independent accountants such Borrower’s or Subsidiary’s business, financial condition, assets, prospects and results of operations. Lenders may participate in any such visit or inspection, at their own expense. Neither Agent nor any Lender shall have any duty to any Borrower to make any inspection, nor to share any results of any inspection, appraisal or report with any Borrower. Borrowers acknowledge that all inspections, appraisals and reports are prepared by Agent and Lenders for their purposes, and Borrowers shall not be entitled to rely upon them.

  • Inspection of Premises Landlord and Landlord's agents shall have the right at all reasonable times during the term of this Agreement and any renewal thereof to enter the Premises for the purpose of inspecting the Premises and all buildings and improvements thereon. And for the purposes of making any repairs, additions or alterations as may be deemed appropriate by Landlord for the preservation of the Premises or the building. Landlord and its agents shall further have the right to exhibit the Premises and to display the usual "for sale", "for rent" or "vacancy" signs on the Premises at any time within forty-five (45) days before the expiration of this Lease. The right of entry shall likewise exist for the purpose of removing placards, signs, fixtures, alterations or additions, that do not conform to this Agreement or to any restrictions, rules or regulations affecting the Premises.

  • Satisfactory Completion of Due Diligence The Company and the Shareholders shall have completed their legal, accounting and business due diligence of the Parent and the results thereof shall be satisfactory to the Company and the Shareholders in their sole and absolute discretion.

  • Additions and Alterations 12 ARTICLE 9

Time is Money Join Law Insider Premium to draft better contracts faster.