Industry Standard Requirements Sample Clauses

Industry Standard Requirements. At least (N-1) metering elements will be used to measure all real and reactive power crossing the Interconnection Points, where N is the number of wires in service including the ground wire. The revenue quality metering package (consisting of instrument transformers, meters, sockets, and test switches) shall be installed, calibrated, and tested (at the requesting Party’s expense) in accordance with the latest approved version of (but not limited to) the ANSI standards listed below, or their successors(s) including the standard testing procedures and guidelines of the Party that owns the metering equipment: ANSI C12.1: Code For Electricity Metering ANSI C12.7: Requirements for Watt-Hour Meter Socket ANSI C12.9: Test Switches for Transformer-Rated Meters ANSI C12.11: Instrument Transformers for Revenue Metering, 10 kV Through 350 kV BIL ANSI C12.10: Electromechanical Watt-hour Meters ANSI C12.16: Solid State Electricity Meters ANSI C12.20: For Electricity Meters 0.2 and 0.5 Accuracy Class ANSI C37.90.1: Surge Withstand Capability (SWC) Test ANSI/IEEE C57.13: Standard Requirements for Instrument Transformers To the extent that the above requirement conflicts with the manuals, standards or guidelines of the applicable Reliability Council regarding interchange metering and transactions, the manuals, standards and guidelines of such Reliability Council shall control.
Sample 1Sample 2
AutoNDA by SimpleDocs
Industry Standard Requirements. Three metering elements are to be used unless both Parties agree doing so is unreasonable. In the event three metering elements are not used, the (N-1) metering elements will be used to measure all real and reactive power crossing the Interconnection Point, where N is the number of wires in service including the ground wire. The revenue quality metering package (consisting of instrument transformers, meters, sockets, and test switches) shall be installed, calibrated, and tested (at the requesting Party’s expense) in accordance with the latest approved version of (but not limited to) the ANSI Standards Documents listed below, or their successors(s) including the standard testing procedures and guidelines of the Party that owns the metering equipment: ANSI C12.1 : Code For Electricity Metering ANSI C12.7 : Requirements for Watt-Hour Meter Socket ANSI C12.9 : Test Switches for Transformer-Rated Meters ANSI C12.11: Instrument Transformers for Revenue Metering, 10kV Through 350kV BIL ANSI C12.10: Electromechanical Watt-hour Meters ANSI C12.16: Solid State Electricity Meters ANSI C12.20: For Electricity Meters 0.2 and 0.5 Accuracy Class ANSI C37.90.1: Surge Withstand Capability (SWC) Test ANSI/IEEE C57.13: ANSI/IEEE C57.13.6: Standard Requirements for Instrument Transformers Standard Requirements for High-Accuracy Instrument Transformers To the extent that the above requirement conflicts with the manuals, standards or guidelines of the applicable Reliability Council regarding interchange metering and transactions, the manuals, standards and guidelines of such Reliability Council shall control.
Sample 1
Industry Standard Requirements. E3-3.5.3.1 The abatement/remediation contractor must comply with the basic industry standards for mold abatement and microbial remediation. Improvements and updates to the industry standards must be continuously incorporated.
Sample 1
Industry Standard Requirements. At least (N-1) metering elements will be used to measure all real and reactive power crossing the Interconnection Point, where N is the number of wires in service including the ground wire. The revenue quality metering package (consisting of instrument transformers, meters, sockets, and test switches) shall be installed, calibrated, and tested (at the requesting Party’s expense) in accordance with the latest approved version of (but not limited to) the Standard Documents listed below, including the standard testing procedures and guidelines of the Party that owns the metering equipment: ANSI C12.1 : Code For Electricity Metering ANSI C12.7 : Requirements for Watt-Hour Meter Socket ANSI C12.9 : Test Switches for Transformer-Rated Meters ANSI C12.11: Instrument Transformers for Revenue Metering, 10kV Through 350kV BIL ANSI C12.10: Electromechanical Watt-hour Meters ANSI C12.16: Solid State Electricity Meters ANSI C12.20: For Electricity Meters 0.2 and 0.5 Accuracy Class ANSI C37.90.1: Surge Withstand Capability (SWC) Test ANSI/IEEE C57.13: Standard Requirements for Instrument Transformers To the extent that the above requirement conflicts with the manuals, standards or guidelines of the applicable Reliability Council regarding interchange metering and transactions, the manuals, standards and guidelines of such Reliability Council shall control.
Sample 1

Related to Industry Standard Requirements

  • Industry Standards Supplier will implement appropriate technical and organizational security measures that comply with Industry Standards in all applicable goods, services, equipment, software systems and platforms that Supplier uses to access, process and/or store Accenture Data. “Industry Standards” means security measures that are commercially reasonable in the information technology industry and that are designed to ensure the security, integrity, and confidentiality of Accenture Data, and to protect against Security Incidents.

  • Minimum Necessary Standard Business Associate shall apply the HIPAA Minimum Necessary standard to any Use or disclosure of PHI necessary to achieve the purposes of this Contract. See 45 CFR 164.514 (d)(2) through (d)(5).

  • HIPAA Requirements The Parties agree that the provisions under HIPAA Rules that are required by law to be incorporated into this Amendment are hereby incorporated into this Agreement.

  • Technical Requirements 2.7.4.1 The NID shall provide an accessible point of interconnection and shall maintain a connection to ground.

  • Basic Requirements To be eligible for PayPal’s Seller Protection program, all of the following basic requirements must be met, as well as any applicable additional requirements: • The primary address for your PayPal account must be in the United States. • The item must be a physical, tangible good that can be shipped, except for items subject to the Intangible Goods Additional Requirements. Transactions involving items that you deliver in person in connection with payment made in your physical store, may also be eligible for PayPal’s Seller Protection program so long as the buyer paid for the transaction in person by using a PayPal goods and services QR code. • You must ship the item to the shipping address on the Transaction Details page in your PayPal account for the transaction. If you originally ship the item to the recipient’s shipping address on the Transaction Details page but the item is later redirected to a different address, you will not be eligible for PayPal’s Seller Protection program. We therefore recommend not using a shipping service that is arranged by the buyer, so that you will be able to provide valid proof of shipping and delivery. • The shipping requirement does not apply to eligible transactions involving items that you deliver in person; provided, however, that you agree to provide us with alternative evidence of delivery or such additional documentation or information relating to the transaction that we may request. • You must respond to PayPal’s requests for documentation and other information in a timely manner as requested in our email correspondence with you or in our correspondence with you through the Resolution Center. If you do not respond to PayPal’s request for documentation and other information in the time requested, you may not be eligible for PayPal’s Seller Protection program. • If the sale involves pre-ordered or made-to-order goods, you must ship within the timeframe you specified in the listing. Otherwise, it is recommended that you ship all items within 7 days after receipt of payment. • You provide us with valid proof of shipment or delivery. • The payment must be marked “eligible” or “partially eligible” in the case of Unauthorized Transaction claims, or “eligible” in the case of Item Not Received claims, for PayPal’s Seller Protection program on the Transaction Details page. • In the case of an Unauthorized Transaction claim, you must provide valid proof of shipment or proof of delivery that demonstrates that the item was shipped or provided to the buyer no later than two days after PayPal notified you of the dispute or reversal. For example, if PayPal notifies you of an Unauthorized Transaction claim on September 1, the valid proof of shipment must indicate that the item was shipped to the buyer no later than September 3 to be eligible for PayPal’s Seller Protection program. PayPal determines, in its sole discretion, whether your claim is eligible for PayPal’s Seller Protection program. PayPal will make a decision, in its sole discretion, based on the eligibility requirements, any information or documentation provided during the resolution process, or any other information PayPal deems relevant and appropriate under the circumstances. Item Not Received additional requirements To be eligible for PayPal’s Seller Protection program for a buyer’s Item Not Received claim, you must meet both the basic requirements and the additional requirements listed below: • Where a buyer files a chargeback with the issuer for a card-funded transaction, the payment must be marked “eligible” for PayPal’s Seller Protection on the Transaction Details page. • You must provide proof of delivery as described below.

  • System Requirements Apple Software is supported only on Apple-branded hardware that meets specified system requirements as indicated by Apple.

  • Reporting Requirements The Company, during the period when the Prospectus is required to be delivered under the 1933 Act or the 1934 Act, will file all documents required to be filed with the Commission pursuant to the 1934 Act within the time periods required by the 1934 Act and the 1934 Act Regulations.

Time is Money Join Law Insider Premium to draft better contracts faster.