Horizontal and Vertical Control Sample Clauses

Horizontal and Vertical Control i. Completed Calibration sheet indicating the monuments used to establish the Basis of Bearings and Vertical Benchmark held to control this survey.
Sample 1Sample 2See All (6)
AutoNDA by SimpleDocs
Horizontal and Vertical Control. The sub-consultant shall conduct an initial site reconnaissance to identify necessary vertical and horizontal control needed for the survey. Prior to data collection efforts, survey control will be recovered and verified using either differential leveling or Real-Time Kinematic (RTK) Global Positioning System (GPS) techniques, whichever methodology is deemed most practical. Data Collection: The survey will extend from the east side of the emergency use path to edge of beach at the eastern toe of the dune. Sub-consultant will obtain cross sections every 50 feet along the alignment of the walking path atop the dune, capturing centerline, edge of path, and grade breaks along each cross section. Sub- consultant will identify edges of vegetation and trees 3” diameter or larger with common tree name and diameter. Survey data shall be collected from toe of slope to toe of slope utilizing angle-distance total- station, RTK GPS, and or conventional rod, chain and level methodologies as needed.
Sample 1
Horizontal and Vertical Control. Unless otherwise specified, benchmarks for Vertical Control and a baseline for Horizontal Control will be as indicated on the Drawings or furnished by Engineer. Contractor will use these controls to establish other lines and grades as indicated on the Drawings. All such Horizontal or Vertical Controls will be preserved by Contractor, and in case of destruction or removal by Contractor or Contractor’s employees, said controls may be replaced by PCCA at Contractor’s expense.
Sample 1
Horizontal and Vertical Control. The field survey and subsequent survey control and monumentation plan (survey control diagram) will establish, horizontally, the location of existing section corners, property corners, and the local control relative to the Colorado High Accuracy Reference Network (XXXX).
Sample 1
Horizontal and Vertical Control. AESI will set photo control targets that meet or exceed Caltrans Second Class Accuracy Standards for Basic Corridor Control. Horizontal locations will be based upon the CALVRS system, utilizing the Lancaster station to establish two (2) horizontal locations, one to be used as a base location for our Trimble R-10 base station and the other as a horizontal check. Each aerial target will be located with two (2) 180 epoch (3 minute) observations at different times of the day to verify accuracy. Vertical datum will be NAVD88, with observations made on a minimum of two (2) Los Angeles County benchmarks. In the event the benchmarks don’t measure within 0.10’ an additional benchmark will be observed to verify any discrepancy. All observations will be processed through the Trimble Business Center Software and provided in the format acceptable to Caltrans.
Sample 1
Horizontal and Vertical Control. Establish survey control using existing available reference control monuments and place site control points and benchmarks with reference ties for use during construction.
Sample 1
Horizontal and Vertical Control. The Engineer’s Surveyor shall recover, review and update existing horizontal and vertical control data, and establish new points as necessary. The surveyor shall prepare location sketches for offsite controls located on the main cross streets, and as directed by the State. The original datum should be maintained with the most suitable adjustment made in order to maintain consistency between the control values and the current planimetric products. DocuSign Envelope ID: EB684705-7EFE-459C-ACCD-BB3BEAE6EBD7
Sample 1
AutoNDA by SimpleDocs
Horizontal and Vertical Control. 1.4.2 Utility Locates (Kansas One-Call, Waterone, and Sanitary Surveys)
Sample 1
Horizontal and Vertical Control. Establish primary and secondary horizontal and vertical control. Horizontal control will be based on State plane coordinates, South Central Zone adjusted to surface using the TxDOT Xxxx County Combined Surface Adjustment Factor (1.00013). Horizontal control will be based on NAD 83 (CORS). Vertical control will be based on NAVD 88 (Geoid 09 or Geoid 12). All control work will be established using GPS (static / RTK / VRS) and conventional methods.
Sample 1

Related to Horizontal and Vertical Control

  • System Access Control Data processing systems used to provide the Cloud Service must be prevented from being used without authorization. Measures: • Multiple authorization levels are used when granting access to sensitive systems, including those storing and processing Personal Data. Authorizations are managed via defined processes according to the SAP Security Policy • All personnel access SAP’s systems with a unique identifier (user ID). • SAP has procedures in place so that requested authorization changes are implemented only in accordance with the SAP Security Policy (for example, no rights are granted without authorization). In case personnel leaves the company, their access rights are revoked. • SAP has established a password policy that prohibits the sharing of passwords, governs responses to password disclosure, and requires passwords to be changed on a regular basis and default passwords to be altered. Personalized user IDs are assigned for authentication. All passwords must fulfill defined minimum requirements and are stored in encrypted form. In the case of domain passwords, the system forces a password change every six months in compliance with the requirements for complex passwords. Each computer has a password-protected screensaver. • The company network is protected from the public network by firewalls. • SAP uses up–to-date antivirus software at access points to the company network (for e-mail accounts), as well as on all file servers and all workstations. • Security patch management is implemented to provide regular and periodic deployment of relevant security updates. Full remote access to SAP’s corporate network and critical infrastructure is protected by strong authentication.

  • Building Access i. Access to Secured buildings: Contractor will work through the GIT Contract administrator for access to the building.

  • Records Maintenance; Access Contractor shall maintain all financial records relating to this Contract in accordance with generally accepted accounting principles. In addition, Contractor shall maintain any other records, books, documents, papers, plans, records of shipments and payments and writings of Contractor, whether in paper, electronic or other form, that are pertinent to this Contract (“Records”) in such a manner as to clearly document Contractor's performance. Contractor acknowledges and agrees that Agency and the Oregon Secretary of State's Office and the federal government and their duly authorized representatives will have access to such financial records and other Records that are pertinent to this Contract, whether in paper, electronic or other form, to perform examinations and audits and make excerpts and transcripts. Contractor shall retain and keep accessible all such financial records and other Records for a minimum of 6 years, or such longer period as may be required by applicable law, following final payment and termination of this Contract, or until the conclusion of any audit, controversy or litigation arising out of or related to this Contract, whichever date is later.

  • Infrastructure Vulnerability Scanning Supplier will scan its internal environments (e.g., servers, network devices, etc.) related to Deliverables monthly and external environments related to Deliverables weekly. Supplier will have a defined process to address any findings but will ensure that any high-risk vulnerabilities are addressed within 30 days.

  • Construction Phase Services 3.1.1 – Basic Construction Services

  • Access Control Supplier will maintain an appropriate access control policy that is designed to restrict access to Accenture Data and Supplier assets to authorized Personnel. Supplier will require that all accounts have complex passwords that contain letters, numbers, and special characters, be changed at least every 90 days, and have a minimum length of 8 characters.

  • Provisioning of High Frequency Spectrum and Splitter Space 3.2.1 BellSouth will provide <<customer_name>> with access to the High Frequency Spectrum as follows:

  • Technology Access A. Contractor expressly acknowledges that state funds may not be expended in connection with the purchase of an automated information system unless that system meets certain statutory requirements relating to accessibility by persons with visual impairments. Accordingly, Contractor represents and warrants to System Agency that the technology provided to System Agency for purchase (if applicable under this Contract or any related Solicitation) is capable, either by virtue of features included within the technology or because it is readily adaptable by use with other technology, of:

  • Communications Equipment Members of the board of directors or any committee thereof may participate in and act at any meeting of such board or committee through the use of a conference telephone or other communications equipment by means of which all persons participating in the meeting can hear each other, and participation in the meeting pursuant to this section shall constitute presence in person at the meeting.

  • System Upgrade Facilities and System Deliverability Upgrades Connecting Transmission Owner shall design, procure, construct, install, and own the System Upgrade Facilities and System Deliverability Upgrades described in Appendix A hereto. The responsibility of the Developer for costs related to System Upgrade Facilities and System Deliverability Upgrades shall be determined in accordance with the provisions of Attachment S to the NYISO OATT.

Time is Money Join Law Insider Premium to draft better contracts faster.