Furniture Layout Sample Clauses

Furniture Layout. Layout showing furniture location so that Landlord's engineer can review the location of all light fixtures.
AutoNDA by SimpleDocs
Furniture Layout. Layout showing furniture location so that Landlord's engineer can review the location of all light fixtures. The Allowance shall be applied to the cost of the engineers retained by Tenant's Office Planner preparing plumbing (Holiday Parks), electrical (Evergreen Electrical), heating, air conditioning (Holiday Parks) and structural plans (KPFF) (Engineering Drawings) for Tenant's improvements based on the signed Working Drawings. The Allowance shall also be applied to any necessary review of the Engineering Drawings by Landlord's shell and core engineer (Xxxxxxx Engineers, Inc.).
Furniture Layout. Layout showing furniture location so that Landlord's engineer can review the location of all light fixtures. The Allowance shall be applied to the cost of the engineers retained by Tenant's Office Planner. The Allowance shall also be applied to any necessary review of the Engineering Drawings by Landlord's shell and core engineers: electrical (Holmxx Xxxctric), mechanical (McDoxxxx Xxxlxx) xxd structural plans (KPFF) (Engineering Drawings) for Tenant's improvements based on the signed Working Drawings.
Furniture Layout. Layout showing furniture location so that Landlord's electrical engineer can review the location of all light fixtures and plan for furniture power/cabling connection points. Also provide furniture cut sheets and produce information to describe electrical coordination needs.
Furniture Layout. Layout showing furniture location so that Sublessor's engineer can review the location of all light fixtures. Landlord's HVAC engineers, Xxxxxxx Parks, shall prepare air conditioning plans ("ENGINEERING DRAWINGS") for Sublessee's improvements, and at Sublease's expense, based on the signed Working Drawings. Landlord's electrical engineer, Xxxxxxx Engineers, shall review the electrical design after the general contractor and electrical subcontractor are selected at Sublease's expense. Sublessor's Allowance may be applied against this expense at Sublessee's election.
Furniture Layout. Layout showing furniture location so that Landlord's engineer can review the location of all light fixtures. The Allowance shall be applied to the cost of the engineers retained by Tenant's Office Planner. The Allowance shall also be applied to any necessary review of the Engineering Drawings by Landlord's shell and core engineers: electrical (Xxxxxx Electric), mechanical (XxXxxxxx Xxxxxx) and structural plans (KPFF) (Engineering Drawings) for Tenant's Improvements based on the signed Working Drawings, unless Tenant engages those engineers directly to work on the Tenant Improvements. If Tenant does not engage one or more of those engineers, such review costs shall not exceed $.10 per usable square foot for review by each of the mechanical and electrical engineers.

Related to Furniture Layout

  • Furniture For no additional charge, Landlord hereby leases to Tenant and Tenant hereby leases from Landlord those items of furniture and artwork situated in the Premises (the “FURNITURE”) and described on the inventory list attached hereto as EXHIBIT C (the “INVENTORY LIST”). Landlord hereby represents to Tenant that Landlord owns the Furniture and has the right to lease the Furniture to Tenant as described herein. Landlord and Tenant acknowledge that prior to the Lease Commencement Date the parties will conduct a “walk-through” inspection of the Premises in order to confirm the completeness and accuracy of the furniture shown on the Inventory List, and to give Tenant the opportunity to confirm that the Furniture is in good condition and repair. Subject to such “walk-through” inspection, Tenant accepts the Furniture in its “as-is” condition, without any representation or warranty by Landlord. LANDLORD SPECIFICALLY DISCLAIMS ANY REPRESENTATIONS AND/OR WARRANTIES, INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR OF FITNESS FOR A PARTICULAR PURPOSE WITH RESPECT TO THE FURNITURE. During the Term of this Lease, Tenant shall maintain and repair the Furniture as reasonably necessary, and shall insure the same along with its other personal property pursuant to ARTICLE 10 hereof. Upon the expiration or earlier termination of this Lease, Tenant shall surrender the Furniture to Landlord in the same condition and repair as on the Lease Commencement Date, reasonable wear and tear and damage by casualty excepted.

  • Furniture, Fixtures and Equipment Sublessee shall have the right to use during the Term the office furnishings and equipment within the Subleased Premises that are identified on Exhibit C attached hereto, as such exhibit may be adjusted by mutual agreement of the parties prior to the Third Floor Premises Delivery Date (the “Furniture”), provided Sublessee may only use the Furniture located in the Second Floor Premises after the Second Floor Commencement Date. The Furniture is provided in its “AS IS, WHERE IS” condition, without representation or warranty whatsoever. Sublessee shall insure the Furniture under the property insurance policy required under the Master Lease, as incorporated herein, and pay all taxes with respect to the Furniture. Sublessee shall maintain the Furniture in good condition and repair, reasonable wear and tear excepted, and shall be responsible for any loss or damage to the same occurring during the Term. Sublessee shall surrender the Furniture to Sublessor upon the termination of this Sublease in the same condition as exists as of the applicable Delivery Date, reasonable wear and tear excepted. Sublessee shall not remove any of the Furniture from the Subleased Premises. Notwithstanding anything to the contrary herein, Sublessee may provide Sublessor with written notice one (1) time not less than forty-five (45) days prior to the Third Floor Premises Delivery Date that lists any items of Furniture that Sublessee does not want to use and Sublessor shall, at no cost to Sublessee, remove such items from the Subleased Premises prior to the Third Floor Premises Delivery Date and such items shall no longer be considered Furniture hereunder. Notwithstanding the foregoing, provided Sublessee is not in default beyond the expiration of any applicable cure or grace period as of the date of the expiration or earlier termination of this Sublease, which condition may be waived by Sublessor in its sole discretion, then upon the expiration or earlier termination of this Sublease, the Furniture shall become the property of Sublessee, and Sublessee shall accept the same in its “AS IS, WHERE IS” condition, without representation or warranty whatsoever except as provided in the Bill of Sale referred to in the following sentence. In the event the Furniture is to become the property of Sublessee upon the expiration or earlier termination of this Sublease pursuant to the terms of the immediately preceding sentence, then Sublessor agrees to execute and deliver to Sublessee a Bill of Sale in the form of Exhibit D attached hereto conveying and transferring to Sublessee the Furniture.

  • Furniture and Equipment For purposes of this Lease, the terms “furniture and equipment” shall mean collectively all furniture, furnishings, wall coverings, fixtures and hotel equipment and systems located at, or used in connection with, the Hotel, together with all replacements therefor and additions thereto, including, without limitation, (i) all equipment and systems required for the operation of kitchens and bars, laundry and dry cleaning facilities, (ii) office equipment, (iii) material handling equipment, cleaning and engineering equipment, (iv) telephone and computerized accounting systems, and (v) vehicles.

  • Furnishings Landlord shall have the right to prescribe the weight and position of safes and other heavy equipment and fixtures, which, if considered necessary by Landlord, shall be installed in such manner as Landlord directs in order to distribute their weight adequately. In no event shall Tenant place on any part of the floor of the Premises a load exceeding the floor load per square foot which such floor was designed to carry and which is allowed by law. Any and all damage or injury to the Premises or the Building caused by moving such heavy equipment or fixtures or the same being in or upon the Premises, shall be repaired by and at the sole cost of Tenant. All furniture, equipment, and other bulky matter of any description shall be delivered to the Premises only through the designated service entrance of the Building and the designated service elevator during normal business hours or as otherwise directed or scheduled by Landlord. All moving of furniture, equipment, and other materials shall be under the supervision of Landlord, who shall not, however, be responsible for any damage to or charges for moving the same. Tenant agrees to remove promptly from the sidewalks adjacent to the Building any of Tenant's furniture, equipment, or other material there delivered or deposited.

  • Tooling Inventory that consists of tooling or replacement parts;

  • Option to Put Bank Premises and Related Fixtures, Furniture and Equipment (i) For a period of ninety (90) days following Bank Closing, the Assuming Institution shall be entitled to require the Receiver to purchase any Bank Premises that is owned, directly or indirectly, by an Acquired Subsidiary and the purchase price paid by the Receiver shall be the Fair Market Value of the Bank Premises.

  • Equipment The Fund shall obtain and maintain at its own cost and expense all equipment and services, including but not limited to communications services, necessary for it to utilize the Software and obtain access to the System, and Custodian shall not be responsible for the reliability or availability of any such equipment or services.

  • Capital Equipment Collaborator’s commitment, if any, to provide ICD with capital equipment to enable the research and development activities under the Research Plan appears in Appendix B. If Collaborator transfers to ICD the capital equipment or provides funds for ICD to purchase it, then ICD will own the equipment. If Collaborator loans capital equipment to ICD for use during the CRADA, Collaborator will be responsible for paying all costs and fees associated with the transport, installation, maintenance, repair, removal, or disposal of the equipment, and ICD will not be liable for any damage to the equipment.

  • Partitions (a) Partitions within the Premises shall have 2” gypsum board on each sided of 3-5/8” metal studs, 16’ on center, taped and spackled. Partitions between the Premises, corridor(s) and between the Premises and adjacent space, shall have 5/8” fire code gypsum board, taped and spackled, on each side of 3-5/8” metal studs, 16” on center above finished ceiling to underside of metal deck. Demising partitions and corridor partitions to have thermofibre insulation installed within, and to be constructed from floor to underside of metal deck above.

  • Vending Machines Seller shall remove all monies from all vending machines, laundry machines, pay telephones and other coin-operated equipment as of the Cut-Off Time and shall retain all monies collected therefrom as of the Cut-Off Time, and Purchaser shall be entitled to any monies collected therefrom after the Cut-Off Time.

Time is Money Join Law Insider Premium to draft better contracts faster.