Frequency and Continuity Sample Clauses

Frequency and Continuity the level definitions incorporate a scale of frequency and continuity, as follows: Occasional - infrequently and/or for a short period of time - would generally result in the job being assessed at level 1 or 2, depending on the nature of the effort (unless the job also involves other forms of physical effort) e.g. if the demand is seasonal or occurring on average less than one day/shift in 10 over the year as a whole; Periodic - more frequent than occasional, but less frequent than regular; effort not necessarily associated with normal job duties; Regular - in the dictionary sense of repeated; would usually be associated with normal job duties; Frequent - in the dictionary sense; certainly associated with normal job duties; Ongoing - continuous or almost continuous; associated with the job duties undertaken for most of the working shift. Demands over particular periods relate to the nature of the work so, when evaluating a part-time job, which is not normally done on a 37 hours per week basis, for example, most school support roles, the assessment should be as if it were carried out on a full time basis. It is assumed that all relevant health and safety regulations are complied with. However, in considering the continuity of effort, breaks required by health and safety regulations (for example, for VDU work or driving), or other recognised breaks, should not be treated as breaks in the period of effort. Considerable physical effort, for example, could be rubbing/scrubbing tables, painting walls or doors with brush or roller, lifting/carrying piles of files or buckets of water or pushing a wheelchair with child or adult occupant. High physical effort, for example, could include scrubbing floors, sawing wood, lifting or carrying large containers of food or similar, pushing a wheelchair with a heavy occupant, pushing a well-laden trolley or sweeping mud or ice. Very high physical effort, for example, could include lifting or carrying sacks of potatoes, pushing/pulling full wheelie bins or a bed with a very heavy occupant, digging heavy soil or soil below ground level or laying full-size paving stones.
AutoNDA by SimpleDocs

Related to Frequency and Continuity

  • Registry Interoperability and Continuity Registry Operator shall comply with the Registry Interoperability and Continuity Specifications as set forth in Specification 6 attached hereto (“Specification 6”).

  • Business Continuity Registry Operator shall maintain a business continuity plan, which will provide for the maintenance of Registry Services in the event of an extraordinary event beyond the control of the Registry Operator or business failure of Registry Operator, and may include the designation of a Registry Services continuity provider. If such plan includes the designation of a Registry Services continuity provider, Registry Operator shall provide the name and contact information for such Registry Services continuity provider to ICANN. In the case of an extraordinary event beyond the control of the Registry Operator where the Registry Operator cannot be contacted, Registry Operator consents that ICANN may contact the designated Registry Services continuity provider, if one exists. Registry Operator shall conduct Registry Services Continuity testing at least once per year.

  • Service Continuity The production database servers are replicated in near real time to a mirrored data center in a different geographic region.

  • Configuration Management The Contractor shall maintain a configuration management program, which shall provide for the administrative and functional systems necessary for configuration identification, control, status accounting and reporting, to ensure configuration identity with the UCEU and associated cables produced by the Contractor. The Contractor shall maintain a Contractor approved Configuration Management Plan that complies with ANSI/EIA-649 2011. Notwithstanding ANSI/EIA-649 2011, the Contractor’s configuration management program shall comply with the VLS Configuration Management Plans, TL130-AD-PLN-010-VLS, and shall comply with the following:

  • Business Continuity Planning Supplier shall prepare and maintain at no additional cost to Buyer a Business Continuity Plan (“BCP”). Upon written request of Buyer, Supplier shall provide a copy of Supplier’s BCP. The BCP shall be designed to ensure that Supplier can continue to provide the goods and/or services in accordance with this Order in the event of a disaster or other BCP-triggering event (as such events are defined in the applicable BCP). Supplier’s BCP shall, at a minimum, provide for: (a) the retention and retrieval of data and files; (b) obtaining resources necessary for recovery, (c) appropriate continuity plans to maintain adequate levels of staffing required to provide the goods and services during a disruptive event; (d) procedures to activate an immediate, orderly response to emergency situations; (e) procedures to address potential disruptions to Supplier’s supply chain; (f) a defined escalation process for notification of Buyer, within two (2) business days, in the event of a BCP-triggering event; and (g) training for key Supplier Personnel who are responsible for monitoring and maintaining Supplier’s continuity plans and records. Supplier shall maintain the BCP and test it at least annually or whenever there are material changes in Supplier’s operations, risks or business practices. Upon Xxxxx’s written and reasonable request, Supplier shall provide Buyer an executive summary of test results and a report of corrective actions (including the timing for implementation) to be taken to remedy any deficiencies identified by such testing. Upon Xxxxx’s request and with reasonable advance notice and conducted in such a manner as not to unduly interfere with Supplier’s operations, Supplier shall give Buyer and its designated agents access to Supplier’s designated representative(s) with detailed functional knowledge of Supplier’s BCP and relevant subject matter.

  • Account Management 15.1 The Contractor is required to provide a dedicated Strategic Account Manager who will be the main point of contact for the Authority. The Strategic Account Manager will:  Attend quarterly, or as otherwise agreed, review meetings with the Authority, in person at the Authority’s premises or other locations as determined by the Authority  Attend regular catch-up meetings with the Authority, in person or by telephone/videoconference  Resolve any on-going operational issues which have not been resolved by the Contractor or Account Manager(s) and therefore require escalation  Ensure that the costs involved in delivering the Framework are as low as possible, whilst always meeting the required standards of service and quality.

  • Project Management Plan 1 3.4.1 Developer is responsible for all quality assurance and quality control 2 activities necessary to manage the Work, including the Utility Adjustment Work.

Time is Money Join Law Insider Premium to draft better contracts faster.