FINAL PRODUCT Sample Clauses

FINAL PRODUCT. Consultant will provide six hard copies and six electronic copies (on compact discs) of the final product to EDCTC. Final product must be consistent with deliverables identified in the approved scope of work. The final product is funded through the INSERT FUNDING SOURCE grant program. Therefore, the final product shall credit the INSERT FUNDING AGENCY’s financial participation on the cover or title page.
Sample 1Sample 2Sample 3See All (10)
AutoNDA by SimpleDocs
FINAL PRODUCT. A report and list of proposed recommendations to be used potentially as a basis for policy changes and/or the negotiation of a Memorandum of Understanding.
Sample 1Sample 2
FINAL PRODUCT. On Elan’s request BIP will also offer contract services to manufacture Final Product, including sterile liquid filling in vial or syringe, inspection, manufacturer’s release and bulk packaging (unlabeled vials/syringes in a labeled container). The manufacturing of Finished Product which includes labeling and packaging has to be discussed separately.
Sample 1Sample 2
FINAL PRODUCT any finished product ready for retail that contains SEAQUAL YARN.
Sample 1
FINAL PRODUCT. Hanford Site Wide Electrical Safety Program: • A Site Wide Electrical Safety Program that will apply to Hanford contractors and subcontractors who employ electricians, instrument technicians, or other electrical workers. Hanford Electrical Code Board and Hanford Workplace Electrical Safety Board: • Upon completion of the Hanford Site Wide Electrical Safety Program, the Committee shall develop a Charter for both the Hanford Electrical Code Board and Hanford Workplace Electrical Safety Board reflecting remaining actions for the administration, implementation, maintenance, and long term stewardship of the Hanford Site Wide Electrical Safety Program, including any recommended training requirements. The Hanford Electrical Code Board and Hanford Workplace Electrical Safety Board Charters and Hanford Site Wide Electrical Safety Program documents shall be submitted to RL and ORP for final approval. Hanford Site Wide Electrical Safety Program Development Committee (ESPDC) Ground Rules Example Ground Rules are established to facilitate discussion, xxxxxx understanding, and to build consensus. Any member of the Committee can remind others of the Ground Rules or inform the Facilitator of the need to invoke the Ground Rules to avoid disruptions or manage conflict. Members of the ESPDC agree to: • Take turns speaking, to not interrupt each other, and to not monopolize a discussion. The Facilitator has the responsibility to set a limit on the amount of time any one person can speak and to ensure that all Members have the opportunity to speak. • Listen respectfully and sincerely try to understand the other person’s concerns and interests. • Not blame, attack, or engage in put-downs. Members will ask questions of each other only for the purposes of gaining clarity and understanding. • Openly share pertinent information. • Treat all ideas with respect. • Refrain from derogatory or inflammatory language. • Be conscious of body language and nonverbal responses -- they can be as disrespectful as words. • Refrain from disruptive side conversations. • Practice timely attendance, including breaks. • Not disrupt the meeting through the use of cell phones, laptop computers, pagers, or email. If a call needs to be taken, it will be taken away from the meeting area. • Participate to the fullest of their ability. Members will stay on the topic/agenda and wait to discuss other items until they are at the appropriate place on the agenda. If situations call for a change in the topic or a...
Sample 1
FINAL PRODUCT. Based on comments received on the draft versions of the Model Development Report and Model Users Guide, the Cheyenne MPO will update and finalize these two documents. Xxxx & Peers will review the documents again prior to finalization by the Cheyenne MPO. Proposal to Update and Improve the Cheyenne Travel Demand Model DELIVERABLE 7 – Review and input of the final Model Development Report and Model Users Guide. Fee: Task 7 will be completed on a time and material basis with a not‐to‐exceed fee of $7,700. PROJECT MANAGEMENT & MEETINGS This task involves quality control, general project management of budget, schedule and deliverables. Sixteen (16) hours of project related meetings are included. This does not include time for any public meetings. Fee: Project Management & Meetings will be completed on a time and material basis with a not‐to‐ exceed fee of $8,800.
Sample 1
FINAL PRODUCT. With regard to addressing gaps in the UASC qualification of guardians and representatives: - Development of training material for trainings of representatives of UASC - Performance of train-the-trainer seminars for altogether approx. 40-50 persons With regard to the identification of particular challenges regarding the situation of UASC from Afghanistan: - Conducting 40-50 qualitative interviews of Afghan UASC and former UASC - Five additional focus group discussions with Afghan UASC and former UASC - Drafting of an internal report with the results of the survey as well as recommen- dations (in German and English), which can be then used for advocacy
Sample 1
AutoNDA by SimpleDocs
FINAL PRODUCT. Storage of Final Product by Talecris will not be deemed "Services" under this Addendum until such Final Product is released by Talecris to Emergent pursuant to the terms of the Agreement and Talecris issues the corresponding invoice to Emergent for the product Processing Fee.
Sample 1
FINAL PRODUCT. The photographer shall not share the raw data including the raw footage and the raw photos with the client. The number of pictures to be delivered depend upon the event itself hence there is no specific limit to the pictures. It can be anywhere between 200 to 400 images per day of shooting. This is just an estimate and the final numbers may vary largely. It is also understood that the Client is hiring the Photographer for his technical and artistic expertise and, therefore, the Photographer reserves the right to edit the images and videos as he sees fit. Editing criteria for photos shall be limited to basic retouching i.e. exposure, highlights, shadows, whites, blacks, lights, darks, saturation, cropping. The final post production and editing styles, effects, and overall look of the images and videos are left to the discretion of the Photographer. The Photographer does not guarantee that everyone involved in the event will be photographed or will be included in the final images.
Sample 1

Related to FINAL PRODUCT

  • Licensed Product “Licensed Product” shall mean any article, composition, apparatus, substance, chemical material, method, process or service whose manufacture, use, or sale is covered or claimed by a Valid Claim within the Patent Rights. For clarity, a “Licensed Product” shall not include other product or material that (a) is used in combination with Licensed Product, and (b) does not constitute an article, composition, apparatus, substance, chemical material, method, process or service whose manufacture, use, or sale is covered or claimed by a Valid Claim within the Patent Rights.

  • Product ACCEPTANCE Unless otherwise provided by mutual agreement of the Authorized User and the Contractor, Authorized User(s) shall have thirty (30) days from the date of delivery to accept hardware products and sixty (60) days from the date of delivery to accept all other Product. Where the Contractor is responsible for installation, acceptance shall be from completion of installation. Failure to provide notice of acceptance or rejection or a deficiency statement to the Contractor by the end of the period provided for under this clause constitutes acceptance by the Authorized User(s) as of the expiration of that period. The License Term shall be extended by the time periods allowed for trial use, testing and acceptance unless the Commissioner or Authorized User agrees to accept the Product at completion of trial use. Unless otherwise provided by mutual agreement of the Authorized User and the Contractor, Authorized User shall have the option to run testing on the Product prior to acceptance, such tests and data sets to be specified by User. Where using its own data or tests, Authorized User must have the tests or representative set of data available upon delivery. This demonstration will take the form of a documented installation test, capable of observation by the Authorized User, and shall be made part of the Contractor’s standard documentation. The test data shall remain accessible to the Authorized User after completion of the test. In the event that the documented installation test cannot be completed successfully within the specified acceptance period, and the Contractor or Product is responsible for the delay, Authorized User shall have the option to cancel the order in whole or in part, or to extend the testing period for an additional thirty (30) day increment. Authorized User shall notify Contractor of acceptance upon successful completion of the documented installation test. Such cancellation shall not give rise to any cause of action against the Authorized User for damages, loss of profits, expenses, or other remuneration of any kind. If the Authorized User elects to provide a deficiency statement specifying how the Product fails to meet the specifications within the testing period, Contractor shall have thirty (30) days to correct the deficiency, and the Authorized User shall have an additional sixty (60) days to evaluate the Product as provided herein. If the Product does not meet the specifications at the end of the extended testing period, Authorized User, upon prior written notice to Contractor, may then reject the Product and return all defective Product to Contractor, and Contractor shall refund any monies paid by the Authorized User to Contractor therefor. Costs and liabilities associated with a failure of the Product to perform in accordance with the functionality tests or product specifications during the acceptance period shall be borne fully by Contractor to the extent that said costs or liabilities shall not have been caused by negligent or willful acts or omissions of the Authorized User’s agents or employees. Said costs shall be limited to the amounts set forth in the Limitation of Liability Clause for any liability for costs incurred at the direction or recommendation of Contractor.

  • Licensed Products Lessee will obtain no title to Licensed Products which will at all times remain the property of the owner of the Licensed Products. A license from the owner may be required and it is Lessee's responsibility to obtain any required license before the use of the Licensed Products. Lessee agrees to treat the Licensed Products as confidential information of the owner, to observe all copyright restrictions, and not to reproduce or sell the Licensed Products.

  • Additional Products Upon satisfying the minimum order requirements above, Enrolled Affiliate may order Additional Products.

  • Supply of Product Salix shall use reasonable efforts to supply the Product during the Co-Promotion Period in sufficient quantities to satisfy the levels of Product sales forecasted in the then current Marketing Plan. Salix shall maintain reasonable inventory levels of the Product in order to ensure their ability to fulfill this obligation. Salix shall have the sole responsibility and right to fill orders with respect to the Product. Altana shall not solicit orders for the Product but, if for any reason, Altana shall receive an order for the Product, Altana shall promptly forward to Salix any such orders. All orders for Product shall be subject to acceptance by Salix, in its sole discretion, which acceptance shall not be unreasonably withheld. Salix may cancel any order for Product at any time after acceptance without incurring any liability to Altana. Salix shall be solely responsible for responding to requests from Target Physicians for individual patients who need the Product but are unable to afford it. Any such request shall be forwarded by Altana to Salix for processing. Salix shall have the sole right and responsibility for establishing and modifying the terms and conditions of the sale of the Product, including (a) the price at which the Product will be sold, (b) whether the Product will be subject to trade or quantity discounts, (c) whether any discount will be provided for payments on accounts receivable, (d) whether the Product will be subject to rebates, returns and allowances or retroactive price reductions, (e) the channels of distribution of the Product, and (f) whether credit [*] Confidential treatment requested; certain information omitted and filed separately with the SEC. is to be granted or refused in connection with any sale of Product. In the event that Salix fails to supply the Product as required pursuant to this Agreement for any reason other than a Force Majeure, which such failure results in lost sales for Altana, the Parties shall meet and attempt to negotiate a mutually agreeable and commercially reasonable solution. If the Parties cannot reach such an agreement within a reasonable period of time, the issue will be dealt with as contemplated under Section 4.4 of this Agreement.

  • Licensed Territory Worldwide NIH Patent License Agreement—Exclusive APPENDIX C – ROYALTIES Royalties:

  • New Products You agree to comply with NASD Notice to Members 5-26 recommending best practices for reviewing new products.

  • API If the Software offers integration capabilities via an API, your use of the API may be subject to additional costs or Sage specific policies and terms and conditions (which shall prevail in relation to your use of the API). You may not access or use the API in any way that could cause damage to us or the Software, or in contravention of any applicable laws. We reserve the right in our sole discretion, to: (i) update any API from time to time; (ii) place limitations around your use of any API; and (iii) deny you access to any API in the event of misuse by you or to otherwise protect our legitimate interests.

  • Manufacture 2.1. The LED(s) on the LED module shall be equipped with suitable fixation elements.

  • Manufacture of Product Prior to commercialization of the Product, the Parties may, if appropriate for both parties, negotiate in good faith a manufacturing and supply agreement to provide for Licensor to fulfill the manufacturing requirements of Licensee for Product for sale in the European market. The cost of such manufacturing shall not be greater than * percent (*%) of the cost of any competitor cGMP contract manufacturing facility that proposes to manufacturer the Product for Licensee. * Confidential information has been omitted and filed confidentially with the Securities and Exchange Commission.

Time is Money Join Law Insider Premium to draft better contracts faster.