Exterior Noise Sample Clauses

Exterior Noise. The objective of this test is to record exterior noise levels when a bus is operated under various conditions.
AutoNDA by SimpleDocs
Exterior Noise. Notwithstanding anything to the contrary contained in this Lease, in no event shall Commercial Use or CEE Use establishments located in any exterior area of the Premises (i.e., any portion of the Premises that is not within the Above Grade Enclosed Space or Pier Shed Caissons 1 and 2) be used in any manner that will create noise which is plainly audible beyond the Premises and/or in the In-Water Areas without the prior written consent of Landlord, which consent may be withheld, conditioned or delayed in Landlord’s sole and absolute discretion.
Exterior Noise. For the purpose of the exterior noise guarantees of paragraphs 4.1.1, 4.1.2 and 4.1.3 no thrust BUMP for take-off is assumed.
Exterior Noise. The Aircraft [***] shall be certified in accordance with the requirements of Chapter 14 of ICAO Annex 16, Volume I, [***]. Noise data shall be obtained and evaluated in accordance with the requirements of Appendix 2 of Edition 8 of ICAO Annex 16, Volume I, dated July 2017.
Exterior Noise. The exterior noise guarantees as defined below are applicable to the A350-900 XWB aircraft powered by Trent XWB engines at a MTOW and a MLW as defined in Paragraph 1 of the present document.
Exterior Noise. Airborne noise generated by the Trolley and measured from either side shall not exceed 83 dBA under full power acceleration when operated at or below 35 mph at curb weight and just prior to transmission up-shift. The maximum noise level generated by the Trolley pulling away from a stop at full power shall not exceed 83 dBA. The vehicle generated noise at curb idle shall not exceed 65 dBA. If the noise contains an audible discrete frequency as defined in Section 5.1.2, a penalty of 5 dBA shall be added to the sound level measured. All noise readings shall be taken 50 feet from and perpendicular to, the centerline of the vehicle with all accessories operating. Instrumentation, test sites, and other general requirements shall be in accordance with SAE Standard J366. The pull away test shall begin with the front bumper even with the microphone. The curb idle test shall be conducted with the rear bumper even with the microphone.
Exterior Noise 
AutoNDA by SimpleDocs

Related to Exterior Noise

  • Exterior and interior functional areas and spaces of the Project, with technical and equipment requirements on each;

  • Exterior Signs Tenant shall have the right, at its sole risk and expense and in conformity with applicable laws and ordinances, to erect and thereafter, to repair or replace, if it shall so elect signs on any portion of the Leased Premises, providing that Tenant shall remove any such signs upon termination of this lease, and repair all damage occasioned thereby to the Leased Premises.

  • Exterior Signage Subject to Landlord’s prior written approval, which shall not be unreasonably withheld, conditioned or delayed, and provided all signs are in keeping with the quality, design and style of the Building and Project, Tenant, at its sole cost and expense, may install (i) identification signage on the existing monument sign located on the exterior of the Building, (ii) at the entrance to the Building and (iii) internal directional and lobby identification signage (collectively, “Tenant Signage”); provided, however, in no event shall Tenant’s Signage include an “Objectionable Name,” as that term is defined in Section 23.3, of this Lease. All such signage shall be subject to Tenant’s obtaining all required governmental approvals. All permitted signs shall be maintained by Tenant at its expense in a first-class and safe condition and appearance. Upon the expiration or earlier termination of this Lease, Tenant shall remove all of its signs at Tenant’s sole cost and expense. The graphics, materials, color, design, lettering, lighting, size, illumination, specifications and exact location of Tenant’s Signage (collectively, the “Sign Specifications”) shall be subject to the prior written approval of Landlord, which approval shall not be unreasonably withheld, conditioned or delayed, and shall be consistent and compatible with the quality and nature of the Project. Tenant hereby acknowledges that, notwithstanding Landlord’s approval of Tenant’s Signage, Landlord has made no representation or warranty to Tenant with respect to the probability of obtaining all necessary governmental approvals and permits for Tenant’s Signage. In the event Tenant does not receive the necessary governmental approvals and permits for Tenant’s Signage, Tenant’s and Landlord’s rights and obligations under the remaining TCCs of this Lease shall be unaffected. Except as required by applicable law, Landlord shall not install any other signage on the Building. If Landlord elects to install a multi-tenant identification sign at the entrance to the Project, Tenant shall be entitled to install its name on such sign (subject to availability on a pro-rata basis based on the relative square footages leased by the tenants of the Project), at Tenant’s sole cost and expense.

  • Signs; Exterior Appearance Tenant shall not, without the prior written consent of Landlord, which may be granted or withheld in Landlord’s sole discretion: (i) attach any awnings, exterior lights, decorations, balloons, flags, pennants, banners, painting or other projection to any outside wall of the Project, (ii) use any curtains, blinds, shades or screens other than Landlord’s standard window coverings, (iii) coat or otherwise sunscreen the interior or exterior of any windows, (iv) place any bottles, parcels, or other articles on the window xxxxx, (v) place any equipment, furniture or other items of personal property on any exterior balcony, or (vi) paint, affix or exhibit on any part of the Premises or the Project any signs, notices, window or door lettering, placards, decorations, or advertising media of any type which can be viewed from the exterior of the Premises. Interior signs on doors and the directory tablet shall be inscribed, painted or affixed for Tenant by Landlord at the sole cost and expense of Tenant, and shall be of a size, color and type acceptable to Landlord. Nothing may be placed on the exterior of corridor walls or corridor doors other than Landlord’s standard lettering. The directory tablet shall be provided exclusively for the display of the name and location of tenants.

  • Roof Any leaks or evidence of moisture? Yes No Unknown Type of Roof: Age Comments: Is there any existing fire retardant treated plywood? Yes No Unknown Comments:

  • Walls 12 Developer shall provide rustication patterns on all walls, except drainage headwalls, in Aesthetic 13 Area 3 in accordance with Exhibit L2.24 of the LAADCR. The final designs shall resemble these 14 simulations.

  • Interior (a) Ceilings, sidewalls and bulkhead panels shall be clean and free of cracks and stains;

  • Base Building “Base Building” means the Building Structure and Mechanical Systems, collectively, defined as follows:

  • Common Area (Check one)

  • ASBESTOS CONTAINING BUILDING MATERIALS Please be advised that an asbestos survey may have been performed at the Property. If provided, please review the information that identifies the locations of known asbestos containing material or presumed asbestos containing material. All personnel and appropriate subcontractors should be notified of the presence of these materials, and informed not to disturb these materials. Any activity that involves the disturbance or removal of these materials must be done by an appropriately trained individual/contractor.

Time is Money Join Law Insider Premium to draft better contracts faster.