Exterior mirrors Sample Clauses

Exterior mirrors. Test 1: The point of impact shall be as defined in paragraph 6.1.3.2.2.3. or 6.1.3.2.2.4. The impact must be such that the hammer strikes the mirror on the reflecting surface side. - Test 2: The point of impact shall be as defined in paragraph 6.1.3.2.2.3. or 6.1.3.2.2.4. The impact must be such that the hammer strikes the mirror on the side opposite to the reflecting surface. Where Class II or III rear-view mirrors are fixed to the same mounting as Class IV rear-view mirrors, the above-mentioned tests shall be executed on the lower mirror. Nevertheless, the technical service responsible for testing may repeat one or both of these tests on the upper mirror if this is less than 2 m from the ground.
Sample 1Sample 2Sample 3
AutoNDA by SimpleDocs
Exterior mirrors. (a) Test 1: The point of impact shall be as defined in paragraph 6.1.3.2.2.3. or 6.1.3.2.2.4. The impact must be such that the hammer strikes the mirror on the reflecting surface side.
Sample 1Sample 2
Exterior mirrors. The Trolley shall be equipped with a corrosion resistant exterior rearview mirror on each side and shall have amber LED turn signals on the forward exterior sides of the mirror housings. The mirrors shall permit the operator to view the roadway along both sides of the Trolley, including the rear wheels. The curbside rearview mirror shall be mounted so that its lower edge is no less than 80.0 inches above the street surface. The operator shall be able to adjust the curbside mirror remotely while seated in the driving position. The control for remote positioning of the mirror shall be a single switch or device. All reflective glass surfaces of the exterior mirrors shall be electrically heated. The mirror heaters shall be energized whenever the operator activates a momentary switch and shall remain on for a timer-controlled period of ten minutes. All heating elements shall function by a single switch and timer. Mirrors shall be firmly attached to prevent vibration and loss of adjustment, but not so firmly attached that the Trolley or its structure is damaged when the mirror is struck in an collision. Mirrors shall retract or fold sufficiently to allow washing operations and easily return to an operational position. Installation of the roadside mirror shall not compound the area blocked by the windshield pillar.
Sample 1

Related to Exterior mirrors

  • Exterior Drainage Does water stand on the property for more than 24 hours after a heavy rain? Yes No Unknown Comments Are gutters and downspouts in good repair? Yes No Unknown Comments:

  • Exterior and interior functional areas and spaces of the Project, with technical and equipment requirements on each;

  • Walls 12 Developer shall provide rustication patterns on all walls, except drainage headwalls, in Aesthetic 13 Area 3 in accordance with Exhibit L2.24 of the LAADCR. The final designs shall resemble these 14 simulations.

  • Roof Any leaks or evidence of moisture? Yes No Unknown Type of Roof: Age Comments: Is there any existing fire retardant treated plywood? Yes No Unknown Comments:

  • Carpet Cleaning Shampooing carpets with the deep dirt extraction (steam cleaning) method per manufactures recommendations.

  • Interior (a) Ceilings, sidewalls and bulkhead panels shall be clean and free of cracks and stains;

  • Dimensions Education: Bachelor’s or Master’s Degree in Computer Science, Information Systems, or other related field. Or equivalent work experience. Experience: A minimum of 10 years of IT (including Web/Internet, database applications and data warehousing) and business/industry work experience, with at least 3 years of leadership experience in managing multiple, large, cross-functional teams or project, and influencing senior level management and key stakeholders.

  • Structural (i) Structural floor plans and sections with detailing well advanced.

  • Lighting A system of fixtures providing or controlling the light sources used on or near the airport or within the airport buildings. The field lighting includes all luminous signals, markers, floodlights, and illuminating devices used on or near the airport or to aid in the operation of aircraft landing at, taking off from, or taxiing on the airport surface.

  • ROAD DIMENSIONS Purchaser shall perform road work in accordance with the dimensions shown on the TYPICAL SECTION SHEET and the specifications within this road plan.

Time is Money Join Law Insider Premium to draft better contracts faster.