Equipment Quality Sample Clauses

Equipment Quality. Contractor shall furnish reasonable evidence as to the kind, quality, and quantity of all Major Equipment. Without prior written approval by Owner which specifically waives the requirements of this Agreement, where this Agreement specifies certain Major Equipment be incorporated into the Project, Contractor shall not use any Major Equipment other than as specified in this Agreement. If Contractor wishes to modify the requirements contained herein with respect to Major Equipment, then it shall make written application to Owner for Owner’s approval (such approval not to be unreasonably withheld), prior to performing any such Work. Such application shall (i) identify the requirements being modified, (ii) certify that the quality of the proposed substitute is equal to or better than that currently specified, and (iii) certify that the substitute is suited to the same use and capable of performing the same function as that specified. If the preceding requirements are not followed, then any substitution shall constitute a material failure by Contractor to comply with its obligations under this Agreement. All Major Equipment shall be fabricated, applied, installed, connected, operated (during start-up and testing), cleaned and conditioned in accordance with the instructions of the applicable Subcontractor or Sub-subcontractor.
Sample 1Sample 2Sample 3See All (21)
AutoNDA by SimpleDocs
Equipment Quality. Equipment used for the distribution system, head end and reception facilities shall be of good and durable quality and be serviced and repaired on a regular basis.
Sample 1Sample 2See All (4)
Equipment Quality. 3. The Borrower shall cause MOR to ensure that the equipment is procured and used in accordance with the Government’s national technical standards, and that supervision, quality control, and contract management are carried out in a periodic and satisfactory manner.
Sample 1Sample 2See All (4)
Equipment Quality. All Equipment supplied for use hereunder shall be maintained by Carrier in a clean, safe and efficient operating condition. All Equipment shall satisfy all applicable federal, state and local laws, rules and regulations, industry standards, and any other specifications reasonably required by TMS/USA. All Equipment shall be maintained to avoid any form of contamination or damage to Vehicles during shipment and loading/unloading. All Equipment shall be subject to TMS/USA’s inspection and approval prior to loading of Vehicles; provided, however, approval of Equipment and subsequent loading of Vehicles into Equipment shall not relieve Carrier from its responsibility or liability hereunder for any damage, loss, contamination, or destruction of the Vehicles. Carrier shall pay all costs and expenses of every kind or nature, in connection with the ownership, lease, use, maintenance and operation of any such Equipment, including without limitation, any and all fees for licenses or permits and any local, state or federal taxes imposed.
Sample 1
Equipment Quality. ARTICLE 4 OWNER’S RESPONSIBILITIES 4.1 Payment and Financing
Sample 1
Equipment Quality. Equipment used for the distribution system, headend and reception facilities shall be of good and durable quality and be serviced and repaired on a regular basis and shall at all times be of equal or better quality than the following equipment. Pair & Size Fiber Optics: AT&T - 4 DSX (armored) - BXD - 4 DNX - BDX - 4 GSX (armored) - BXD - 4 GNX - BXD Cable: Aerial: Comscope QR540 (feeder to the home), QR860 (express) Underground: Comscope QR540 and QR860 Drop: Comscope RG6 & RG11 Trunk Amplifiers: General Instruments, 4 Hybrid Output, Powering Doubling, 750 MHZ Line Extenders: General Instruments - AGC (Automatic Gain Control) Capable LX Power Supplies: Power Guard Standby Battery Supplies, 6 amp 12 amp 15 amp Splitters: General Instrument - SSP-K Subscriber Taps: General Instrument FFT-K Connectors: Xxxxxxx - XXX-000 - XXX-000 Pedestals: Channel SPH Series Converters or Other Subscriber Equipment: General Instrument CFT2200, DCT1000 Satellite Receive Stations: Scientific Atlanta Satellite Disk 4.5 Meters Noise Block Converters General Instrument Receivers Video Cipher II + DSR1500 IRD
Sample 1
Equipment Quality. The quality of the Equipment should correspond to the technical characteristics, agreed in the Appendix # 1 to the Agreement and is confirmed by the Quality Certificate issued from the plant-manufacturer and the consignor of the Equipment – [ ]. 4.2.
Sample 1
AutoNDA by SimpleDocs

Related to Equipment Quality

  • Product Quality 4.1 The following provisions shall apply to Product after Production:

  • Equipment, Etc Each Grantor shall, (i) within ten (10) days after a written request by the Administrative Agent, in the case of Equipment now owned, and (ii) following a request by the Administrative Agent pursuant to subclause (i) above, within ten (10) days after acquiring any other Equipment, deliver to the Administrative Agent, any and all certificates of title, and applications therefor, if any, of such Equipment and shall cause the Administrative Agent to be named as lienholder on any such certificate of title and applications. No Grantor shall permit any such items to become a fixture to real estate or an accession to other personal property unless such real estate or personal property is the subject of a fixture filing (as defined in the UCC) creating a first priority perfected Lien in favor of the Administrative Agent.

  • Service Quality The Transfer Agent shall maintain a quality control process designed to provide a consistent level of quality and timeliness for its call center, correspondence services and transaction processing.

  • Quality All products will be new and unused. All products provided by the Contractor must meet all federal, state, and local standards for quality and safety requirements. Products not meeting the requirements of this section will be deemed unacceptable and returned to the Contractor for credit at no charge to the State.

  • Additional Equipment Additional Equipment may from time to time be added as the subject matter of this Agreement as agreed on by the parties. Any additional property will be added in an amendment describing the property, the monthly rental, security deposit, and stipulated loss value of the additional Equipment. All amendments must be in writing and signed by both parties. Other than by this amendment procedure, this Agreement may not be amended, modified, or altered in any manner except in writing signed by both parties.

  • Quality Specifications SANMINA-SCI shall comply with the quality specifications set forth in its Quality Manual, incorporated by reference herein, a copy of which is available from SANMINA-SCI upon request.

  • PHASE is a distinct portion of the Work to be provided under this Agreement, as specified in the Statement Of Work.

  • Support Services HP’s support services will be described in the applicable Supporting Material, which will cover the description of HP’s offering, eligibility requirements, service limitations and Customer responsibilities, as well as the Customer systems supported.

  • Cost of Metering The Issuer shall not be obligated to pay any costs associated with the routine metering duties set forth in this Section 2, including the costs of installing, replacing and maintaining meters, nor shall the Issuer be entitled to any credit against the Servicing Fee for any cost savings realized by the Servicer as a result of new metering and/or billing technologies.

Time is Money Join Law Insider Premium to draft better contracts faster.