Engineering, Design and Construction of New Facilities Sample Clauses

Engineering, Design and Construction of New Facilities. If pursuant to a request by the Customer, AEP agrees to provide engineering, design and construction of facilities described in the final study report, a facilities agreement (“Facilities Agreement”) shall be signed by the Customer and AEP specifying the terms and conditions. Each such Facilities Agreement will be incorporated in this agreement, initially as an attachment hereto, and after project completion through inclusion in Attachment 1 and Attachment 2. Following the signing of the Facilities Agreement, the receipt of any outstanding technical information, deposit or instrument or showing that Customer meets the financial creditworthiness requirements of the AEP Tariff, Section 11 (“Creditworthiness”), AEP will proceed with the engineering, design and procurement activities to construct, reconfigure, upgrade, replace or retire such local delivery or other facilities. All Facilities Agreements for Delivery Points existing as of the date of this Agreement and described in Attachment 1 shall remain in full force and effect in accordance with their terms.
Sample 1Sample 2See All (4)
AutoNDA by SimpleDocs
Engineering, Design and Construction of New Facilities. If Customer elects to proceed with the Delivery Point as described in the LCS report, Customer must notify AEP not less than thirty (30) days prior to the expiration of the LCS results as described in Section 2.2.2. Upon receipt of such notice, AEP shall within ten (10) business days offer Customer a Facilities Agreement which describes the Parties’ responsibilities for engineering, design, construction, ownership, operation and maintenance of the facilities described in the LCS report and any creditworthiness requirements of AEP Tariff Section 11 (“Creditworthiness”) and/or additional technical information that Customer must provide. Customer and AEP shall use their best efforts to execute the Facilities Agreement prior to the expiration of the LCS results as described in Section 2.2.2. Operating Companies of the Original Sheet No. 24 American Electric Power System FERC Electric Tariff, Third Revised Volume No. 6 In a case where an LCS has been determined not to be necessary, if Customer elects to proceed with the Delivery Point as described in its study request, Customer must notify AEP within thirty (30) days after AEP informs Customer that an LCS is not necessary. Upon receipt of such notice, unless otherwise mutually agreed, AEP shall within ten (10) business days offer Customer a Facilities Agreement which describes the Parties’ responsibilities for engineering, design, construction, ownership, operation and maintenance of any necessary facilities and any creditworthiness requirements of AEP Tariff Section 11 and/or additional technical information that Customer must provide. Each Facilities Agreement will be incorporated into this Agreement, initially as an attachment hereto, and after project completion through inclusion in Attachment 1 and Attachment 2. Following (i) the execution of the Facilities Agreement, (ii) the receipt of any outstanding technical information, and (iii) the receipt of any required deposit, instrument, or showing that Customer meets the Creditworthiness requirements of the AEP Tariff Section 11, the Parties will proceed with the engineering, design, and procurement activities to construct, reconfigure, upgrade, replace, or retire such local delivery or other facilities as described in the Facilities Agreement. All Facilities Agreements for Delivery Points existing as of the date of this Agreement and described in Attachment 1 shall remain in full force and effect in accordance with their terms.
Sample 1Sample 2
Engineering, Design and Construction of New Facilities. If, pursuant to a request by the Customer, AEP agrees to provide engineering, design and construction of facilities described in the final study report, a facilities agreement (“Facilities Agreement”) shall be signed by the Customer and AEP specifying the terms and conditions. Each such facilities Agreement will be incorporated in this agreement, initially as an attachment hereto, and after project completion through inclusion in Attachment 1 and 2. Following the signing of the Facilities Agreement, the receipt of any outstanding technical information, deposit or instrument or showing that Customer meets the financial creditworthiness requirements of the AEP Tariff, Section 11 (“Creditworthiness”), AEP will proceed with the engineering, design and procurement activities to construct, reconfigure, upgrade, replace or retire such local delivery or other facilities.
Sample 1Sample 2
Engineering, Design and Construction of New Facilities. If pursuant to a request by the Customer, AEP agrees to provide engineering, design and construction of facilities described in the final study report, a Facilities Agreement shall be executed by Buckeye Power, its applicable Member or Members, and AEP specifying the terms and conditions. Following the signing of the Facilities Agreement, the receipt of any outstanding technical information, deposit or instrument or showing of financial creditworthiness, AEP will proceed with the engineering, design and procurement activities to construct, reconfigure, upgrade, replace or retire such local delivery or other facilities. All Facilities Agreements for Delivery Points existing as of the date of this Agreement and described in Attachment 1 shall remain in full force and effect in accordance with their terms.
Sample 1Sample 2
Engineering, Design and Construction of New Facilities. If, pursuant to a request by the Customer, AEP is asked to provide engineering, design and construction of facilities described in the final study report, a facilities agreement (“Facilities Agreement”) shall be signed by the Customer and AEP specifying the terms and conditions. Following the signing of the Facilities Agreement, the receipt of any outstanding technical information, deposit or instrument or showing that Customer meets the financial creditworthiness requirements of the AEP Tariff, Section 11 (“Creditworthiness”), AEP will proceed with the engineering, design and procurement activities to construct, reconfigure, upgrade, replace or retire such local delivery or other facilities.
Sample 1
Engineering, Design and Construction of New Facilities. If, pursuant to a request by the Customer, Host Transmission Owner agrees to provide engineering, design and construction of facilities described in the final study report, a facilities agreement (“Facilities Agreement”) shall be executed by the Customer and Host Transmission Owner specifying the terms and conditions. Each such Facilities Agreement will be incorporated into this Agreement, initially as an attachment hereto, and after project completion through inclusion in Attachment 1 and Attachment 2. Following the execution of the Facilities Agreement, the receipt of any outstanding technical information, deposit or instrument or showing that Customer meets the financial creditworthiness requirements of the SPP Tariff Section 11 (“Creditworthiness”), Host Transmission Owner will proceed with the engineering, design, and procurement activities to construct, reconfigure, upgrade, replace, or retire such local delivery or other facilities. All Facilities Agreements for Delivery Issued by: , Title Effective: 1, 2008 Issued: , 2007 Points existing as of the date of this Agreement and described in Attachment 1 shall remain in full force and effect in accordance with their terms.
Sample 1

Related to Engineering, Design and Construction of New Facilities

  • Design and Construction In complying with the requirements of the specification both with respect to arrangement and detail, design is to conform to the best current engineering practice. Each of the several parts of the material is to be of the maker’s standard design provided that this design is in general accordance with the specification. The essence of design should be simplicity and reliability in order to give long continuous service with high economy and low maintenance cost. Particular attention should be paid to internal and external access in order to facilitate inspection, cleaning and maintenance. The design dimensions and materials of all parts are to be such that they will not suffer damage as a result of stresses under the most severe conditions. Fully detailed specifications of the several parts of the material are to be submitted describing particularly the materials to be used. The materials used in the construction of the material are to be of the highest quality and selected particularly to meet the duties required of them. Mechanisms are to be constructed to avoid sticking due to rust or corrosion. Workmanship and general finish are to be of the highest class throughout. All similar parts of the material are to be interchangeable. All equipment is to operate without undue vibration and with the least possible amount of noise and is not to cause a nuisance. All equipment is to be designed to minimize the risk of fire and any damage, which may be caused in the event of fire. The equipment is also to be designed to prevent ingress of all vermin, accidental contact with live parts and to minimize the ingress of dust and dirt. The use of materials, which may be liable to attack by termites or other insects, is to be avoided.

  • Coordination of Design and Construction Contract Documents 5.5.1 Review model(s), Drawings, Specifications and other Construction Documents as they are developed by A/E during the Schematic Design, Design Development, and Construction Documents design phases of the Project.

  • Interconnection Facilities Engineering Procurement and Construction Interconnection Facilities, Network Upgrades, and Distribution Upgrades shall be studied, designed, and constructed pursuant to Good Utility Practice. Such studies, design and construction shall be based on the assumed accuracy and completeness of all technical information received by the Participating TO and the CAISO from the Interconnection Customer associated with interconnecting the Large Generating Facility.

  • Project Construction The Contractor agrees to provide continuous on-site supervision on each Job Order, while progress on the project is being accomplished. The Contractor’s Project Manager will ensure:

  • New Construction If this contract is for a Property that is newly constructed and the new construction option is selected, coverage begins on day one (1) of month thirteen

  • BUILDER’S RISK FOR NEW CONSTRUCTION PROJECTS If the project is NEW CONSTRUCTION, then the following provisions apply:

  • ADDITIONAL CONSTRUCTIONS The Promoter undertakes that it has no right to make additions or to put up additional structure(s) anywhere in the Project after the building plan has been approved by the competent authority(ies) except for as provided in the Act.

  • PRE-CONSTRUCTION PHASE SERVICES The Pre-Construction Phase shall be deemed to commence upon the date specified in a written Notice to Proceed with Pre-Construction Phase Services issued by Owner and shall continue through completion of the Construction Documents and procurement of all major Subcontractor agreements. Contractor is not entitled to reimbursement for any costs incurred for Pre-Construction Phase Services performed before issuance of the written Notice to Proceed. Pre-Construction Phase Services may overlap Construction Phase Services. Contractor shall perform the following Pre-Construction Phase Services:

  • General construction 20.2.1. Binding Nature.............................................. 20.2.2. Entire Agreement............................................ 20.2.3. Governing Law............................................... 20.2.4. Indulgences Not Waivers..................................... 20.2.5. Titles Not to Affect Interpretation......................... 20.2.6.

  • ADDITIONAL CONSTRUCTION The Promoter undertakes that it has no right to make additions or to put up additional structure(s) anywhere in the Project after the building plan has been approved by the competent authority (ies) except for as provided in the Act.

Time is Money Join Law Insider Premium to draft better contracts faster.