Enclosure. The volume of the Enclosure and the above ground portion of its pad as shown in the Site Plan is cubic feet. The location, size, and appearance of the related ground- based equipment (radios, batteries, etc.), enclosures, cabinets, and pedestals shall be as follows:
Enclosure. III Scanned copy of complete Company profile with details such as:
Enclosure. 3.1 Phase shall be enclosed in weather proof, dust-tight, enclosure of sheet steel fabricated type conforming to degree of protection of IP 55.
Enclosure. The programmable load control DCU enclosure shall be made of UV stabilized, high impact strength plastic. The enclosure shall be NEMA 3R rated. All electronics shall be mounted in a removable door for ease of maintenance. The door shall be double hinged and shall have a dual point latching mechanism. Provisions shall be made for securing the cover with 4 screws and a meter seal.
Enclosure. The use of rigid, durable construction materials that are mechanically fastened to the substrate to act as a barrier between the LBP and the environment.
Enclosure. The following enclosure is attached hereto: Enclosure 1 SGIA between PacifiCorp and Dugway, to be designated as PacifiCorp Service Agreement No. 808 Enclosure 2 Blackline comparing PacifiCorp Service Agreement No. 808 to the pro forma SGIA.
Enclosure. All herein specified procedures necessary to complete enclosure of all ACM behind airtight, impermeable, permanent barriers.
Enclosure. The RPD shall be enclosed in a Lexan EXL polycarbonate. The enclosure shall be classified “f1” outdoor weatherability in accordance with UL 746C. The RPD shall be classified as watertight according to the NEMA 250 Standard. The RPD enclosure shall conform to test criteria set forth in the NEMA 250 standard for type 4X enclosures. Test results shall be provided for each of the following type 4X criteria: • External Icing (NEMA 250 clause 5.6) • Hose-down (NEMA 250 clause 5.7) • 4X Corrosion Protection (NEMA 250 clause 5.10) • Gasket (NEMA 250 clause 5.14) The RPD shall be able to withstand a drop of up to 5 feet (1.5 m) without compromising its functional and structural integrity. The RPD enclosure shall include a connector that meets the MIL-C-26482 specification. The MIL-C-26482 connector shall provide contacts for all data and power connections.
Enclosure. If there are enclosures, write your detail below and what you write in there have the same effect. Owner (The first party) Contractor (The Second Party) PT HANDSOME PT INDOKOR Park sang youll
Enclosure. Use for a crawlspace enclosure is limited to facilitating building component access. The enclosure cannot be dry floodproofed. An attached garage must meet the wet floodproof requirements except for both the required flood openings and limits on use but the attached garage floor must be two (2) or more feet above the Base Flood Elevation; and
