ELIGIBLE PRODUCT Sample Clauses

ELIGIBLE PRODUCT. All products – crafts, preserves and all garden products must be produced by the vendor or the vendor’s family from/in Minnesota.  Packaging is to be in accordance with rules established by the MN Dept. of Ag.  Baked goods must be made from the traditional scratch method, not premade product.  Vendor grown bedding plants, hanging and potted plants, and cut or dried flowers.  Vendor made craft and artwork, health and body care products.  Vendor must display the listed signs, each day of the market. Provided by the market.  Per Operational Guidelines: Seller must post a visible sign stating every market day: These canned goods are homemade and not subject to state inspection.” Or These products are homemade and not subject to state inspection.” LABELING, PERMITS, LICENSES, TAXES AND INSURANCE  ALL LABELS MUST CONTAIN: YOUR FULL NAME, ADDRESS, PHONE, PRODUCT NAME NAME AND DATE PROCESSED. No exceptions.  Please reference information from MN Department of Ag., “Operational Guidelines for
Sample 1Sample 2
AutoNDA by SimpleDocs
ELIGIBLE PRODUCT. Any product sold at the market that is consistent with these Regulations under Part III.
Sample 1Sample 2
ELIGIBLE PRODUCT. ✓ All products – crafts, preserves and all garden products must be produced by the vendor or the vendor’s family from/in Minnesota. ✓ Packaging is to be in accordance with rules established by the MN Dept. of Ag. ✓ Baked goods must be made from the traditional scratch method, not premade product. ✓ Vendor grown bedding plants, hanging and potted plants, and cut or dried flowers. ✓ Vendor made craft and artwork, health and body care products. ✓ Each individual item or package must be labeled with ingredients. ✓ Vendor must display the listed signs, each day of the market. Provided by the market. ✓ Per Operational Guidelines: Seller must post a visible sign stating every market day: These canned goods are homemade and not subject to state inspection.” Or These products are homemade and not subject to state inspection.” As of August, 2021 this is required to be on each product label.
Sample 1
ELIGIBLE PRODUCT the product that can be linked to the programme to earn Avo Points.
Sample 1
ELIGIBLE PRODUCT. The property to be leased or financed pursuant to this Agreement shall be manufactured by Sun Microsystems, Inc ("Product").
Sample 1
ELIGIBLE PRODUCT. Only equipment manufactured by Digital Comm Link, Inc. is eligible for Digital Comm Link, Inc.’s warranty agreements. Only the particular equipment listed on the face of the Agreement is covered by this warranty agreement.
Sample 1
ELIGIBLE PRODUCT. All Covered Product(s) listed below must be purchased new, concurrently with this Agreement and have an underlying manufacturer’s warranty including parts and labor.
Sample 1
AutoNDA by SimpleDocs
ELIGIBLE PRODUCT. ✓ All products – crafts, preserves and all garden products must be produced by the vendor or the vendor’s family from/in Minnesota. ✓ Packaging is to be in accordance with rules established by the MN Dept. of Ag. ✓ Baked goods must be made from the traditional scratch method, not premade product. ✓ Vendor grown bedding plants, hanging and potted plants, and cut or dried flowers. ✓ Vendor made craft and artwork, health and body care products. ✓ Vendor must display the listed signs, each day of the market. Provided by the market. ✓ Per Operational Guidelines: Seller must post a visible sign stating every market day: These canned goods are homemade and not subject to state inspection.” Or These products are homemade and not subject to state inspection.”
Sample 1

Related to ELIGIBLE PRODUCT

  • Defective Product Seller must guarantee a return for all defective products. a) Goods rejected by Buyer for whatever reason shall be held, transported and/or stored at Seller’s sole expense. Seller shall promptly reimburse Buyer for any such expenses. B) Defective product purchase COD will be returned COD to Seller or COD check will be cancelled, at Buyer’s discretion. c) Seller is responsible for all costs associated RoHS noncompliance returns and will accept a full return for all parts not meeting RoHS compliance criteria if necessary. d) Seller is 100% responsible for all monetary and/or rework costs associated with product failures in addition to any further cost whatsoever associated with product failures. e) If suspect parts/counterfeit parts are furnished under this agreement such parts shall be impounded by Buyer. Buyer may provide a sample batch Supplier for verification and authentication. In addition, Buyer reserves the right to send such items to the appropriate manufacturer and appropriate authorities for investigation. f) Seller shall be liable for all costs relating to impound, investigation, removal, or replacement of suspect/counterfeit parts.

  • Combination Product The term “

  • Product ACCEPTANCE Unless otherwise provided by mutual agreement of the Authorized User and the Contractor, Authorized User(s) shall have thirty (30) days from the date of delivery to accept hardware products and sixty (60) days from the date of delivery to accept all other Product. Where the Contractor is responsible for installation, acceptance shall be from completion of installation. Failure to provide notice of acceptance or rejection or a deficiency statement to the Contractor by the end of the period provided for under this clause constitutes acceptance by the Authorized User(s) as of the expiration of that period. The License Term shall be extended by the time periods allowed for trial use, testing and acceptance unless the Commissioner or Authorized User agrees to accept the Product at completion of trial use. Unless otherwise provided by mutual agreement of the Authorized User and the Contractor, Authorized User shall have the option to run testing on the Product prior to acceptance, such tests and data sets to be specified by User. Where using its own data or tests, Authorized User must have the tests or representative set of data available upon delivery. This demonstration will take the form of a documented installation test, capable of observation by the Authorized User, and shall be made part of the Contractor’s standard documentation. The test data shall remain accessible to the Authorized User after completion of the test. In the event that the documented installation test cannot be completed successfully within the specified acceptance period, and the Contractor or Product is responsible for the delay, Authorized User shall have the option to cancel the order in whole or in part, or to extend the testing period for an additional thirty (30) day increment. Authorized User shall notify Contractor of acceptance upon successful completion of the documented installation test. Such cancellation shall not give rise to any cause of action against the Authorized User for damages, loss of profits, expenses, or other remuneration of any kind. If the Authorized User elects to provide a deficiency statement specifying how the Product fails to meet the specifications within the testing period, Contractor shall have thirty (30) days to correct the deficiency, and the Authorized User shall have an additional sixty (60) days to evaluate the Product as provided herein. If the Product does not meet the specifications at the end of the extended testing period, Authorized User, upon prior written notice to Contractor, may then reject the Product and return all defective Product to Contractor, and Contractor shall refund any monies paid by the Authorized User to Contractor therefor. Costs and liabilities associated with a failure of the Product to perform in accordance with the functionality tests or product specifications during the acceptance period shall be borne fully by Contractor to the extent that said costs or liabilities shall not have been caused by negligent or willful acts or omissions of the Authorized User’s agents or employees. Said costs shall be limited to the amounts set forth in the Limitation of Liability Clause for any liability for costs incurred at the direction or recommendation of Contractor.

  • Combination Products If a LICENSED PRODUCT is sold to any third party in combination with other products, devices, components or materials that are capable of being sold separately and are not subject to royalties hereunder (“OTHER PRODUCTS,” with the combination of products being referred to as “COMBINATION PRODUCTS” and the Other Product and Licensed Product in such Combination Product being referred to as the “COMPONENTS”), the NET SALES of such LICENSED PRODUCT included in such COMBINATION PRODUCT shall be calculated by multiplying the NET SALES of the COMBINATION PRODUCT by the fraction A/(A+B), where A is the average NET SALES price of such LICENSED PRODUCT in the relevant country, as sold separately, and B is the total average NET SALES price of all OTHER PRODUCTS in the COMBINATION PRODUCT in the relevant country, as sold separately. If, in any country, any COMPONENT is not sold separately, NET SALES for royalty determination shall be determined by the formula [C / (C+D)], where C is the aggregate average fully absorbed cost of the Licensed Product components during the prior Royalty Period and D is the aggregate average fully absorbed cost of the other essential functional components during the prior Royalty Period, with such costs being determined in accordance with generally accepted accounting principles. To the extent that any SUBLICENSE INCOME relates to a COMBINATION PRODUCT or is otherwise calculated based on the value of one or more licenses or intellectual property rights held by the COMPANY, an AFFILIATE or SUBLICENSEE, COMPANY shall determine in good faith and report to THE PARTIES the share of such payments reasonably attributable to COMPANY’s or such AFFILIATE’s sublicense of the rights granted hereunder, based upon their relative importance and proprietary protection, which portion shall be the SUBLICENSE INCOME. THE PARTIES shall have the right to dispute such sharing determination in accordance with the dispute provisions of the AGREEMENT.

  • Defective Products None of the Group Companies has manufactured, sold or supplied products which are, or were, in any material respect, faulty or defective, or which do not comply in any material respect with any representations or warranties expressly made by such Group Company, or with all applicable regulations, standards and requirements.

  • Licensed Product “Licensed Product” shall mean any article, composition, apparatus, substance, chemical material, method, process or service whose manufacture, use, or sale is covered or claimed by a Valid Claim within the Patent Rights. For clarity, a “Licensed Product” shall not include other product or material that (a) is used in combination with Licensed Product, and (b) does not constitute an article, composition, apparatus, substance, chemical material, method, process or service whose manufacture, use, or sale is covered or claimed by a Valid Claim within the Patent Rights.

  • New Products You agree to comply with NASD Notice to Members 5-26 recommending best practices for reviewing new products.

  • API If the Software offers integration capabilities via an API, your use of the API may be subject to additional costs or Sage specific policies and terms and conditions (which shall prevail in relation to your use of the API). You may not access or use the API in any way that could cause damage to us or the Software, or in contravention of any applicable laws. We reserve the right in our sole discretion, to: (i) update any API from time to time; (ii) place limitations around your use of any API; and (iii) deny you access to any API in the event of misuse by you or to otherwise protect our legitimate interests.

  • Competing Products The provisions of Section 21 are set forth on attached Exhibit H and are incorporated in this Section 21 by this reference.

  • Product Recall (a) If a recall is required by applicable Law, or if Buyer or Supplier reasonably determines that a recall is advisable because the goods may create a potential safety hazard, are not in compliance with any applicable code, standard or legal requirement, or contain a defect or non-conformance with the requirements of this Order occurring or likely to occur in multiple goods, which such defects or non-conformances are substantially similar or have substantially similar causes or effects (collectively a “Serial Defect”), the parties shall promptly communicate such facts to each other. At Buyer’s request, Supplier shall promptly develop a corrective action plan satisfactory to Buyer, which shall include all actions required to recall and/or repair the goods and any actions required by applicable Law (“Corrective Action Plan”) for Buyer’s review and approval. At Buyer’s election, Xxxxx may develop the Corrective Action Plan. In no event shall Buyer and Supplier’s failure to agree on the Corrective Action Plan delay the timely notification of a potential safety hazard, non-compliance or Serial Defect to users of the goods, cause either party to be non-compliant with applicable Law or prevent Buyer from taking reasonable actions to prevent injury or damage to persons, equipment or other property. Supplier and Buyer shall cooperate with and assist each other in any corrective actions and/or filings, if applicable.

Time is Money Join Law Insider Premium to draft better contracts faster.