Electrical Specifications. 12.1 Electricity supply will be provided as per terms and conditions indicated in Annexure - 2.The Licensee shall bear the amount of all the bills/costs for the electricity that may be consumed due to the operation of the advertisement panels /spaces allotted under this agreement. Licensee shall use energy efficient equipment. Advertiser shall follow the I.E. Rules, Acts for safety of equipment, public & Staff.
Electrical Specifications. 12.1 Electricity supply will be provided as per terms and conditions indicated in Annexure -
Electrical Specifications. (a) Lighting: 2’x4’ recessed fluorescent lay-in 3” deep, 18 cell low iridescence Parabolic louver (1 fixture per 80SF), Energy efficient ballast.
Electrical Specifications. All electrical work shall be installed in accordance with the National Electrical Code, and the local building code. A "
Electrical Specifications. 8.1.1. Electricity supply will be provided as per terms and conditions indicated in Annexure - 3 : Rules and Guidelines for Release of Electric Power. The Licensee shall bear the amount of all the bills/costs for the electricity that may be consumed due to the operation of the advertisement panels /spaces allotted under this agreement. Licensee shall use energy efficient equipment. Advertiser shall follow the I.E. Rules, Acts for safety of equipment, public & Staff.
Electrical Specifications. The detailed electrical specifications of Neg48DC/DC PSU are shown as below : INPUT SPECIFICATIONS Input Voltage Range -36 ~ -75VDC Inrush Current 75A max. OUTPUT SPECIFICATIONS Output Voltage (Volts) +12V Output Current (Amps) 33.3A(+12V) Max Power (Watt) –40°C to 55°C 450W, –40°C to 65°C 400W Output Voltage (Volts) +5VSB Output Current (Amps) 3A (+5VSB) Efficiency >88% @20% load, >91 @50% load, >89% @100% load Ripple P-P (mV) (max.) +12V:120, +5VSB:50 Total Regulation ±5% GENERAL SPECIFICATIONS Hold-up Time (min.) 3mS@-48VDC Over Voltage Protection Latch off Over Current & Short Circuit Protection Auto Recovery Over Temperature Protection Auto Recovery FAN Failure Protection Hot Swap Load Sharing Hi-pot 2545VDC ENVIRONMENTAL SPECIFICATIONS Operating Temperature Range –40°C to 65°C Storage Temperature Range –40°C to +70°C Humidity, Non-Condensing 0 to 95% RH EMI Meets FCC/CISPR 22 Class A(under 6dB) Specification Table 3-1 3Y Power Supply Specification
Electrical Specifications. Rated voltage 12 VDC Rated current 900mA, 1035mA, max. Rated power consumption 10.8W, 12.42W, max. Operating voltage range 10.2~13.2 VDC Starting voltage 10.2 VDC (25 degC) Operating temperature -40~70 degC Rated speed 25000 RPM+/-10% at rated voltage Air flow 31.3CFM, 27.6 CFM min. Static pressure 2.81 Inch-H2O, 1.96 Inch-H2O min. Acoustic noise 62.0 dB(A), 69.5 dB(A) max.
Electrical Specifications. Seller warrants that the Electric Energy delivered to PPUC shall meet the connection requirements, quality standards and technical specifications set forth in the Interconnection Agreement or the Interconnection Standards, as applicable, and Schedule 3.
Electrical Specifications. The client is advised to supply a distribution box to accommodate all supplied equipment. The client is discouraged from using all other sockets other than those specified above to avoid power outage due to faulty appliances. Hanging Truss
Electrical Specifications. 8.1.1. The Licensee shall have to take power connection from MSEDCL/respective power distribution company directly. The Licensee shall be responsible to pay its respective electricity bills directly to the concerned power distribution company. All necessary charges for procuring such connection/ electric meter shall be borne by the Licensee.
