Electrical Harmonics Sample Clauses

Electrical Harmonics. Electrical harmonics shall be considered as components of current or voltage whose frequency is some multiple of the 60-hertz fundamental frequency. The Customer shall assume the responsibility of direct loss by reason of damages to NSPI Facilities caused by NSPI Open Access Transmission Tariff, Attachment G 149 As approved by the UARB May 31, 2005 As Amended June 10, 2016 NSPI Open Access Transmission Tariff electrical harmonics produced in the Customer Facilities provided that such liability shall be restricted to the repair or, if necessary, the replacement or modification of such NSPI Facilities which have been damaged or made necessary by reason of electrical harmonics produced in the Customer Facilities. The Customer agrees to take all reasonable steps to limit the effects of any electrical harmonics that may be produced in the Customer Facilities to a level tolerable to NSPI. NSPI shall cooperate with the Customer in the investigation of any harmonic problems and the analysis of corrective measures. NSPI reserves the right to discontinue the supply of power and energy where in its opinion the reliability of NSPI Facilities is threatened by the presence of electrical harmonics.
Sample 1
AutoNDA by SimpleDocs
Electrical Harmonics. Electrical harmonics shall be considered as components of current or voltage whose frequency is some multiple of the 60-hertz fundamental frequency. The Transmission RtR Customer shall assume the responsibility of direct loss by reason of damages to NSPI Facilities caused by electrical harmonics produced in the Transmission RtR Customer Facilities provided that such liability shall be restricted to the repair or, if necessary, the replacement or modification of such NSPI Facilities which have been damaged or made necessary by reason of electrical harmonics produced in the Transmission RtR Customer Facilities. The Transmission RtR Customer agrees to take all reasonable steps to limit the effects of any electrical harmonics that may be produced in the Transmission RtR Customer Facilities to a level tolerable to NSPI. NSPI shall cooperate with the Transmission RtR Customer in the investigation of any harmonic problems and the analysis of corrective measures. NSPI reserves the right to discontinue the supply of power and energy where in its opinion the reliability of NSPI Facilities is threatened by the presence of electrical harmonics.
Sample 1

Related to Electrical Harmonics

  • Electrical Equipment Residents must use only CSA, UL-approved or Canadian-certified electrical equipment; the rated wattage of light fixtures must never be exceeded; and only replacement bulbs supplied by Waterloo maintenance staff may be used. Do not leave any unattended electrical equipment turned on (i.e. hair straighteners, lights etc.)

  • Electrical Provide drawings for the following systems:

  • Electrical Safety Only UL approved items are permitted in Housing & Residence Life. Extension and multi-use cords must be heavy duty, single plug, and be UL approved. Altering or adapting electrical outlets and equipment and overloading circuits jeopardize safety and thus are not permitted.

  • Electrical appliance safety The Hirer shall ensure that any electrical appliances brought by them to the premises and used there shall be safe, in good working order, and used in a safe manner in accordance with the Electricity at Work Regulations 1989. Where a residual circuit breaker is provided the hirer must make use of it in the interests of public safety.

  • Lighting A system of fixtures providing or controlling the light sources used on or near the airport or within the airport buildings. The field lighting includes all luminous signals, markers, floodlights, and illuminating devices used on or near the airport or to aid in the operation of aircraft landing at, taking off from, or taxiing on the airport surface.

  • Electrical Service Electrical service for new construction or a renovated existing building shall be 480/277-volt, 3-phase, 4-wire or approved equal. Service shall be sized for HVAC and other mechanical system(s) loads, lighting, general building services, and dedicated computer based office equipment loads. 5 xxxxx per square foot shall be provided for lighting and general service receptacles. Size of neutral conductor of 3- phase circuits shall be twice that of phase conductor to accommodate potential harmonic currents associated with computer system electronic power supplies and fluorescent lighting fixtures electronic ballasts. An adequately sized 3 phase “wye” wound step down transformer shall be provided to supply 208/120-volt, 3 phase power, for lighting, general service receptacles and dedicated computer based office equipment. Dedicated, isolated ground circuits shall be supplied from separate isolated ground power distribution panel(s). Lighting circuits shall be supplied from separate lighting panel(s). Panels shall have 20% spare capacity and be complete with 10% spare breakers of each size, but no less than 1 spare. No more than 4 duplex receptacles shall be connected to any single 20-amp dedicated isolated ground circuit or general service circuit.

  • Drainage Systems (1) Clear culvert inlets, outlets, and sediment catching basins.

  • Electrical connections Equipment requiring electrical connections for operation shall either be hard wired to the Authorized User's provided connections or the Contractor shall be responsible for a male electrical union. All connections shall be made by the Contractor and accomplished in accordance with National Electrical Code requirements. Electrically operated equipment shall be available in the following volts and phases: 208 volt 1 or 3 phase, 60 HZ 220 volt 1 or 3 phase, 60 HZ 440 volt 1 or 3 phase, 60 HZ

  • SS7 Network Interconnection 9.7.1 SS7 Network Interconnection is the interconnection of Global Connection local signaling transfer point switches or Global Connection local or tandem switching systems with BellSouth signaling transfer point switches. This interconnection provides connectivity that enables the exchange of SS7 messages among BellSouth switching systems and databases, Global Connection local or tandem switching systems, and other third-party switching systems directly connected to the XxxxXxxxx XX0 network.

  • Electrical Installations 3.1 Wiring and accessories for lighting of Common Areas.

Time is Money Join Law Insider Premium to draft better contracts faster.