Common use of Electrical Components Clause in Contracts

Electrical Components. The electrical components are warranted for one (1) year and include, but are not limited to, the draft damper control motor or combustion fan, and all components of the control box. What is covered by this warranty? This warranty covers any defects in materials or workmanship in your new ENERGY KING solid-fuel heating appliance. What is not covered by this warranty? This limited warranty does not apply: • If your appliance has not been installed, operated and maintained in strict accordance with instructions provided in the Installation, Operation and Maintenance Manual. • If any part has been damaged in shipment, modified, altered, tampered with, abused, or has been subject to accident or misuse. • If your appliance has been altered or repaired in a manner which, in our sole judgment, affects its performance, stability or reliability. • If parts not made or supplied by us have been used in connection with the appliance, if in our sole judgment, such use affects its performance, stability or reliability. • To transportation charges on appliances and appliance parts submitted for repair or replacement under this warranty. • To expendable, replaceable or wear items, such as firebrick, gaskets/seals, paint, handles and other items that in our judgment are expendable, replaceable or wear items. • To any heating system or systems to which the appliance may be attached. • To any of the smoke pipes, heat pipes, chimney, hardware, ducting, vents, or other accessories used for the installation and venting or ducting of the appliance. We are not responsible for installation and will not be liable in any respect under the terms of the warranty for injury or damage to the building structure in which the appliance has been installed, or to the person or persons and property therein, arising out of the use, or installation of the ENERGY KING appliance. The appliance must be installed in compliance with the state, local national building and fire codes and regulations of the area and in strict adherence to the Manufacturer’s recommendations. Rev 02/06/12 ENERGY KING® 385EK Wood/Coal Furnace Owner’s Manual ◆ U. S. 51 What will we do to correct problems? We will repair, or at our option, replace any ENERGY KING solid-fuel heating appliance or appliance part, which upon inspection shows a defect in materials or workmanship. How can you get service? If warranty service is needed during the warranty period, notify your authorized ENERGY KING dealer. If there is no ENERGY KING dealer in your area, contact RJM Manufacturing, Inc. directly. Provide your name, address, phone number, serial number and model number of the furnace, date of purchase, name and address of installer and a description of the problem.

Electrical Components. The electrical components are warranted for one (1) year and include, but are not limited to, the draft damper control motor or combustion fan, and all components of the control box. What is covered by this warranty? This warranty covers any defects in materials or workmanship in your new ENERGY KING solid-fuel heating appliance. What is not covered by this warranty? This limited warranty does not apply: • If your appliance has not been installed, operated and maintained in strict accordance with instructions provided in the Installation, Operation and Maintenance Manual. • If any part has been damaged in shipment, modified, altered, tampered with, abused, or has been subject to accident or misuse. • If your appliance has been altered or repaired in a manner which, in our sole judgment, affects its performance, stability or reliability. • If parts not made or supplied by us have been used in connection with the appliance, if in our sole judgment, such use affects its performance, stability or reliability. • To transportation charges on appliances and appliance parts submitted for repair or replacement under this warranty. • To expendable, replaceable or wear items, such as firebrick, gaskets/seals, paint, handles and other items that in our judgment are expendable, replaceable or wear items. • To any heating system or systems to which the appliance may be attached. • To any of the smoke pipes, heat pipes, chimney, hardware, ducting, vents, or other accessories used for the installation and venting or ducting of the appliance. We are not responsible for installation and will not be liable in any respect under the terms of the warranty for injury or damage to the building structure in which the appliance has been installed, or to the person or persons and property therein, arising out of the use, or installation of the ENERGY KING appliance. The appliance must be installed in compliance with the state, local national building and fire codes and regulations of the area and in strict adherence to the Manufacturer’s recommendations. Rev 02/06/12 ENERGY KING® 385EK 360EK/365EK/480EK Wood/Coal Furnace Owner’s Manual ◆ U. S. 51 What will we do to correct problems? We will repair, or at our option, replace any ENERGY KING solid-fuel heating appliance or appliance part, which upon inspection shows a defect in materials or workmanship. How can you get service? If warranty service is needed during the warranty period, notify your authorized ENERGY KING dealer. If there is no ENERGY KING dealer in your area, contact RJM Manufacturing, Inc. directly. Provide your name, address, phone number, serial number and model number of the furnace, date of purchase, name and address of installer and a description of the problem.

Electrical Components. The electrical components are warranted for one (1) year and include, but are not limited to, the draft damper control motor or combustion fan, and all components of the control box. What is covered by this warranty? This warranty covers any defects in materials or workmanship in your new ENERGY KING solid-fuel heating appliance. What is not covered by this warranty? This limited warranty does not apply: • If your appliance has not been installed, operated and maintained in strict accordance with instructions provided in the Installation, Operation and Maintenance Manual. • If any part has been damaged in shipment, modified, altered, tampered with, abused, or has been subject to accident or misuse. • If your appliance has been altered or repaired in a manner which, in our sole judgment, affects its performance, stability or reliability. • If parts not made or supplied by us have been used in connection with the appliance, if in our sole judgment, such use affects its performance, stability or reliability. • To transportation charges on appliances and appliance parts submitted for repair or replacement under this warranty. • To expendable, replaceable or wear items, such as firebrick, gaskets/seals, paint, handles and other items that in our judgment are expendable, replaceable or wear items. • To any heating system or systems to which the appliance may be attached. • To any of the smoke pipes, heat pipes, chimney, hardware, ducting, vents, or other accessories used for the installation and venting or ducting of the appliance. We are not responsible for installation and will not be liable in any respect under the terms of the warranty for injury or damage to the building structure in which the appliance has been installed, or to the person or persons and property therein, arising out of the use, or installation of the ENERGY KING appliance. The appliance must be installed in compliance with the state, local national building and fire codes and regulations of the area and in strict adherence to the Manufacturer’s recommendations. Rev 02/06/12 ENERGY KING® 385EK 360EK/365EK/480EK Wood/Coal Furnace Owner’s Manual ◆ ⬩ U. S. 51 What will we do to correct problems? We will repair, or at our option, replace any ENERGY KING solid-fuel heating appliance or appliance part, which upon inspection shows a defect in materials or workmanship. How can you get service? If warranty service is needed during the warranty period, notify your authorized ENERGY KING dealer. If there is no ENERGY KING dealer in your area, contact RJM Manufacturing, Inc. directly. Provide your name, address, phone number, serial number and model number of the furnace, date of purchase, name and address of installer and a description of the problem.

Electrical Components. The electrical components are warranted for one (1) year and include, but are not limited to, the draft damper control motor or combustion fancirculation blower, snap disc thermostat, power cord, and all components of the control boxthree-speed switch. What is covered by this warranty? This warranty covers any defects in materials or workmanship in your new ENERGY KING solid-fuel heating appliance. What is not covered by this warranty? This limited warranty does not apply: • ▪ If your appliance has not been installed, operated and maintained in strict accordance with instructions provided in the Installation, Operation and Maintenance Manual. • ▪ If any part has been damaged in shipment, modified, altered, tampered with, abused, or has been subject to accident or misuse. • ▪ If your appliance has been altered or repaired in a manner which, in our sole judgment, affects its performance, stability or reliability. • ▪ If parts not made or supplied by us have been used in connection with the appliance, if in our sole judgment, such use affects its performance, stability or reliability. • ▪ To transportation charges on appliances and appliance parts submitted for repair or replacement under this warranty. • ▪ To expendable, replaceable or wear items, such as firebrick, gaskets/seals, paint, handles and other items that in our judgment are expendable, replaceable or wear items. • ▪ To any heating system or systems to which the appliance may be attached. • ▪ To any of the smoke pipes, heat pipes, chimney, hardware, ducting, vents, or other accessories used for the installation and venting or ducting of the appliance. We are not responsible for installation and will not be liable in any respect under the terms of the warranty for injury or damage to the building structure in which the appliance has been installed, or to the person or persons and property therein, arising out of the use, or installation of the ENERGY KING appliance. The appliance must be installed in compliance with the statelocal, local state and national building and fire codes and regulations of the area and in strict adherence to the Manufacturer’s recommendations. Rev 02/06/12 ENERGY KING® 385EK Wood/Coal Furnace Owner’s Manual ◆ U. S. 51 What will we do to correct problems? We will repair, or at our option, replace any ENERGY KING solid-fuel heating appliance or appliance part, which upon inspection shows a defect in materials or workmanship. Rev 05/10/10 ENERGY KING Bay 2000C Owner’s Manual ◆ U. S. Warranty Page 1 of 2 How can you get service? If warranty service is needed during the warranty period, notify your authorized ENERGY KING dealer. If there is no ENERGY KING dealer in your area, contact RJM Manufacturing, Inc. directly. Provide your name, address, phone number, serial number and model number of the furnaceFireplace, date of purchase, name and address of installer and a description of the problem.