Electrical and Lighting Sample Clauses

Electrical and Lighting. Manager shall perform the electrical systems services, as described in the NPA Manual, pages 10, 21-22 and 32 in a manner that is consistent with the Housekeeping and Maintenance Schedule. City shall perform all other maintenance services required for the electrical systems, including those services described in the NPA Manual, pages 10 and 21-22 that are assigned to City. Although Manager shall replace burned-out lamps, the City shall be responsible for group relamping of the Parking Facility.
Sample 1Sample 2Sample 3
AutoNDA by SimpleDocs
Electrical and Lighting. The Landlord shall furnish all electrical power distribution, outlets and lighting in compliance with the most current National Electrical Code standards. Lighting fixtures throughout the Premises shall be capable of providing illumination levels in accordance with ANSI/IES Standards for Office Lighting in effect on the date of commencement of the term herein. Lighting for exterior areas and other applications shall conform to the recommended levels in the current IES Lighting Handbook in effect on the date of commencement of the term herein.
Sample 1Sample 2
Electrical and Lighting. Tenant shall maintain, repair and replace the electrical systems of the Parking Facility in the manner described in the NPA Manual. Tenant shall replace all burned out lamps as and when such lamps burn out.
Sample 1
Electrical and Lighting. Manager shall perform the electrical 649 systems services described in Exhibit A as a Manager responsibility in a manner consistent with 650 the guidelines described in the NPA Manual, pages 10 and 21-22. Manager shall perform these 651 electrical systems services on a schedule consistent with Exhibit A. City shall perform all other 652 maintenance services required for the electrical systems, including those services described in 653 the NPA Manual, pages 10 and 21-22 that are assigned to City. Although Manager shall replace 654 burned-out lamps, the City shall be responsible for group relamping of the Parking Facility.
Sample 1
Electrical and Lighting. A. All electrical distribution materials and equipments shall meet required building codes and be consistent with those currently utilized within the project.
Sample 1

Related to Electrical and Lighting

  • Electrical Provide drawings for the following systems:

  • Lighting A system of fixtures providing or controlling the light sources used on or near the airport or within the airport buildings. The field lighting includes all luminous signals, markers, floodlights, and illuminating devices used on or near the airport or to aid in the operation of aircraft landing at, taking off from, or taxiing on the airport surface.

  • ELECTRICAL SERVICES A. Landlord shall provide electric power for a combined load of 3.0 xxxxx per square foot of useable area for lighting and for office machines through standard receptacles for the typical office space.

  • HEATING The Hirer shall ensure that no unauthorised heating appliances shall be used on the premises when open to the public without the consent of the management committee. Portable Liquefied Propane Gas (LPG) heating appliances shall not be used.

  • Use of Electrical Services by Tenant Tenant's use of electrical services furnished by Landlord shall be subject to the following:

  • Metering The Interconnection Customer shall be responsible for the Connecting Transmission Owner’s reasonable and necessary cost for the purchase, installation, operation, maintenance, testing, repair, and replacement of metering and data acquisition equipment specified in Attachments 2 and 3 of this Agreement. The Interconnection Customer’s metering (and data acquisition, as required) equipment shall conform to applicable industry rules and Operating Requirements.

  • Infrastructure (a) The Borrower has and will maintain a sufficient infrastructure to conduct its business as presently conducted and as contemplated to be conducted following its execution of this Agreement.

  • Systems The details of any systems work will be determined after a thorough business analysis. System's work will be billed on a time and material basis. Investors Bank provides an allowance of 10 systems hours for data extract set up and reporting extract set up. Additional hours will be billed on a time and material basis.

  • HVAC A. Heating, ventilating and air conditioning equipment will be provided with sufficient capacity to accommodate a maximum population density of one (1) person per one hundred fifty (150) square feet of useable floor area served, and a combined lighting and standard electrical load of 3.0 xxxxx per square foot of useable floor area. In the event Tenant introduces into the Premises personnel or equipment which overloads the system’s ability to adequately perform its proper functions, Landlord shall so notify Tenant in writing and supplementary system(s) may be required and installed by Landlord at Tenant’s expense, if within fifteen (15) days Tenant has not modified its use so as not to cause such overload. Operating criteria of the basic system shall not be less than the following:

  • Electrical Service Electrical service for new construction or a renovated existing building shall be 480/277-volt, 3-phase, 4-wire or approved equal. Service shall be sized for HVAC and other mechanical system(s) loads, lighting, general building services, and dedicated computer based office equipment loads. 5 xxxxx per square foot shall be provided for lighting and general service receptacles. Size of neutral conductor of 3- phase circuits shall be twice that of phase conductor to accommodate potential harmonic currents associated with computer system electronic power supplies and fluorescent lighting fixtures electronic ballasts. An adequately sized 3 phase “wye” wound step down transformer shall be provided to supply 208/120-volt, 3 phase power, for lighting, general service receptacles and dedicated computer based office equipment. Dedicated, isolated ground circuits shall be supplied from separate isolated ground power distribution panel(s). Lighting circuits shall be supplied from separate lighting panel(s). Panels shall have 20% spare capacity and be complete with 10% spare breakers of each size, but no less than 1 spare. No more than 4 duplex receptacles shall be connected to any single 20-amp dedicated isolated ground circuit or general service circuit.

Time is Money Join Law Insider Premium to draft better contracts faster.