DOORS & HARDWARE Sample Clauses

DOORS & HARDWARE. (a) Use building standard doors, frames, and lever hardware throughout.
Sample 1Sample 2Sample 3See All (8)
AutoNDA by SimpleDocs
DOORS & HARDWARE. A. Glass entrance door is existing.
Sample 1Sample 2
DOORS & HARDWARE. New door and hardware consistent with other offices to be installed. Door to conference room to be relocated to new location. New door and hardware for Office S7. Install door entry to Lab “A” from corridor. New entrance doors leading from exterior into corridor link and for reception and reception entrance door leading from corridor link into reception area, finishes to be consistent with building standards (doors shall be 3.5” medium stile, super strength, Series M, dark bronze by Architectural Glazing Systems or equivalent door system).
Sample 1
DOORS & HARDWARE. A. Glass entrance door is existing. B. Interior Doors 3’ - 0” x 6’ - 8” x 1 - 3/4” flush solid core, stain grade, birch veneer door or to match existing (New doors to have Minwax Dark Walnut #2716). Door frames shall be KD hollow metal. (3) 4 x 4 hinges with 26 D finish (Brushed finish). Hardware shall be lever action Cal-Royal SL Series with 26D finish (Grade 2 or better). Function to be compatible with room types indicated on drawings Wall mounted door stops with interior wall blocking. Provide closers on all bathroom doors (excluding single fixture bathrooms) and doors leading to warehouse. C. Labeled Doors (where required) Provide labeled doors and frames with rated hinges. Lever action Cal-Royal SL Series locksets. Surface mounted closers.
Sample 1

Related to DOORS & HARDWARE

  • Hardware IF HARDWARE IS IDENTIFIED ON A TRANSACTION DOCUMENT, THE SALE AND USE OF THE HARDWARE WILL BE GOVERNED BY TERMS OTHER THAN THIS XXXX. OT DISCLAIMS ALL WARRANTIES AND LIABILITY WITH RESPECT TO THE HARDWARE.

  • Sprinkler System If there now is or shall be installed in the Building a "sprinkler system", and such system or any of its appliances shall be damaged or injured or not in proper working order by reason of any act or omission of Tenant, Tenant's agents, servants, employees, licensees or visitors, Tenant shall forthwith restore the same to good working condition at its own expense; and if the New York Board of Fire Underwriters or the New York Fire Insurance Rating Organization or any bureau, department or official of the state or city government, shall require or recommend that any changes, modifications, alterations or additional sprinkler heads or other equipment be made or supplied by reason of Tenant's business, or the location of the partitions, trade fixtures, or other contents of the Premises, Tenant shall, at Tenant's expense, promptly make and supply such changes, modifications, alterations, additional sprinkler heads or other equipment.

  • HVAC A. Heating, ventilating and air conditioning equipment will be provided with sufficient capacity to accommodate a maximum population density of one (1) person per one hundred fifty (150) square feet of useable floor area served, and a combined lighting and standard electrical load of 3.0 xxxxx per square foot of useable floor area. In the event Tenant introduces into the Premises personnel or equipment which overloads the system’s ability to adequately perform its proper functions, Landlord shall so notify Tenant in writing and supplementary system(s) may be required and installed by Landlord at Tenant’s expense, if within fifteen (15) days Tenant has not modified its use so as not to cause such overload. Operating criteria of the basic system shall not be less than the following:

  • Lighting A system of fixtures providing or controlling the light sources used on or near the airport or within the airport buildings. The field lighting includes all luminous signals, markers, floodlights, and illuminating devices used on or near the airport or to aid in the operation of aircraft landing at, taking off from, or taxiing on the airport surface.

  • Furniture Sub-Sublandlord represents and warrants that all furniture and equipment listed and described in Schedule “B” attached hereto is within the Sub-Subleased Premises (such equipment and furniture is hereinafter collectively referred to as the “Existing Furniture”). The Sub-Sublandlord warrants that the Existing Furniture is free of any financial lien or hypothec and that there are no service contracts affecting the Existing Furniture. The parties acknowledge and agree that, upon the execution and delivery of this Sub-Sublease, without the requirement of any additional consideration, all rights, title and ownership in and to the Existing Furniture shall be conveyed to and vest in Sub-Subtenant and Sub-Subtenant shall be free to maintain and/or dispose the Existing Furniture as Sub-Subtenant so elects in its sole discretion but subject to the terms hereof. The foregoing conveyance with respect to the Existing Furniture shall be self-executing and no additional documentation shall be required in order to evidence the aforementioned assignment and conveyance of the Existing Furniture to Sub-Subtenant. Sub-Sublandlord makes no representation or warranty as to the condition, fitness or suitability of such Existing Furniture for Sub-Subtenant’s purposes. Sub-Subtenant may, as it deems appropriate or necessary, reconfigure the Existing Furniture to combine with any of Sub-Subtenant’s furniture and equipment. Sub-Sublandlord shall have no obligation for the maintenance, repair or replacement of any such Existing Furniture.

  • Installation Where installation is required, Contractor shall be responsible for placing and installing the product in the required locations at no additional charge, unless otherwise designated on the Contract or purchase order. Contractor’s authorized product and price list shall clearly and separately identify any additional installation charges. All materials used in the installation shall be of good quality and shall be free of defects that would diminish the appearance of the product or render it structurally or operationally unsound. Installation includes the furnishing of any equipment, rigging, and materials required to install or replace the product in the proper location. Contractor shall protect the site from damage and shall repair damages or injury caused during installation by Contractor or its employees or agents. If any alteration, dismantling, excavation, etc., is required to achieve installation, the Contractor shall promptly restore the structure or site to its original condition. Contractor shall perform installation work so as to cause the least inconvenience and interference with Customers and with proper consideration of others on site. Upon completion of the installation, the location and surrounding area of work shall be left clean and in a neat and unobstructed condition, with everything in satisfactory repair and order.

  • Doors Exterior doors may not be propped open for safety and security reasons. Students may be referred to the student conduct system if found propping these doors. Doors marked as emergency exits may only be used for emergency purposes other than during University-sanctioned move-in days.

  • Configuration The configuration for the Purchase Right Aircraft will be the Detail Specification for Model 767-3S2F aircraft at the revision level in effect at the time of the Supplemental Agreement. Such Detail Specification will be revised to include (i) changes required to obtain required regulatory certificates and (ii) other changes as mutually agreed upon by Boeing and Customer.

  • Walls 12 Developer shall provide rustication patterns on all walls, except drainage headwalls, in Aesthetic 13 Area 3 in accordance with Exhibit L2.24 of the LAADCR. The final designs shall resemble these 14 simulations.

  • Interior (a) Ceilings, sidewalls and bulkhead panels shall be clean and free of cracks and stains;

Time is Money Join Law Insider Premium to draft better contracts faster.