DIVISION C. Special Provisions In accordance with A21, the Sections, Subsections, and Items therein listed are attached and made a part hereof. The material is indexed by the numbering system used in Division B. The numbers after the C (that identifies material in this Division) indicates the Part, Section, Subsection, or Item of Division B that is being supplemented or modified by each particular provision included in this Division.
DIVISION C. ARBITRATION
DIVISION C. Special Provisions In accordance with A21, the Sections, Subsections, and Items therein listed are attached and made a part hereof. The material is indexed by the numbering system used in Division B. The numbers after the C (that identifies material in this Division) indicates the Part, Section, Subsection, or Item of Division B that is being supplemented or modified by each particular provision included in this Division. C2.11# – TIMBER SUBJECT TO AGREEMENT. (2/71) In addition, there is within Sale Area an unestimated quantity of: Species Product Cull Logs Combined Cull Logs Other softwood Subdivisions 2 and 3 Sawtimber that shall be Included Timber upon written agreement. C2.2# - MINIMUM PIECE SIZE FOR SAWTIMBER. (2/2009) Purchaser is not required to pay for or remove minimum sawtimber pieces as described in A2 if said pieces have a net scale of less than 20 board feet. SAMPLE C2.35# DESIGNATION OF TIMBER, CUTTING UNIT BOUNDARIES, AND SUBDIVISION/PAYMENT UNIT BOUNDARIES (6/2012) Trees are designated for cutting under B2.35 only if designated as shown in the Timber Designation table below. The boundaries of Subdivisions/Payment Units and Cutting Units are designated as shown in the Boundary Designation table below. Trees used for boundary designation are not to be cut. SPECIFICATIONS PURSUANT TO C2.35# - DESIGNATION OF TIMBER. CUTTING UNIT BOUNDARIES, AND SUBDIVISION/PAYMENT UNIT BOUNDARIES Timber Designation Table Subdivision/Area/ Payment Unit Tree Paint Color Designation or Specification Mandatory Subdivision 1 (Timber Subject to Agreement) Subdivisions 2 and 3 Blue Hazard Tree. Notwithstanding B2.32 all dead and unstable live trees which are leaning towards a road or are otherwise hazardous to a road, and are sufficiently tall to reach Purchaser's landings or the roadbed of National Forest System roads within Sale Area, shall be felled by Purchaser when Marked in the specified paint color above and below xxxxx height by Forest Service in advance of felling any other timber in the vicinity. Pieces meeting Utilization Standards from such dead and unstable live trees shall be removed unless Purchaser is notified in writing that removal would cause unacceptable damage to areas requiring special protection such as residual timber, roads, administrative sites, streamside management zones, and areas identified on Sale Area Map or on the ground. Mandatory Subdivision 1 (Timber Subject to Agreement) Subdivisions 2 and 3 Blue Individual Tree Mark. Individual tr...
DIVISION C. Special Provisions In accordance with A21, the Sections, Subsections, and Items therein listed are attached and made a part hereof. The material is indexed by the numbering system used in Division B. The numbers after the C (that identifies material in this Division) indicates the Part, Section, Subsection, or Item of Division B that is being supplemented or modified by each particular provision included in this Division. C2.21# – UTILIZATION, REMOVAL, AND AMOUNT PAYABLE FOR NON-SAWTIMBER. (5/2008) Notwithstanding B2.2, Purchaser is required to pay for, cut, and remove the Non-Sawtimber Products of Included Timber listed in A2 and those Non-Sawtimber Products listed in the following table, unless otherwise agreed. If Purchaser can sufficiently demonstrate that no market exists within the normal delivery distance for specific Non-Sawtimber Products, Forest Service and Purchaser may agree to alternate removal requirements of such Non- Sawtimber Products as specified in the alternate removal agreement. See Agreement Example. The agreement for alternate removal requirements shall be executed prior to removing any timber from the Unit(s) included in the agreement. Alternate removal requirements shall apply only to whole units and not to portions of units. All material meeting alternate removal specifications shall be cut and moved to locations designated in the agreement. Volumes of material with alternate removal requirements will be determined from the cruise report for the sale. SAMPLE Purchaser will be charged for the following:
DIVISION C. Special Provisions In accordance with A21, the Sections, Subsections, and Items therein listed are attached and made a part hereof. The material is indexed by the numbering system used in Division B. The numbers after the C (that identifies material in this Division) indicates the Part, Section, Subsection, or Item of Division B that is being supplemented or modified by each particular provision included in this Division. C2.301# - CUTTING UNIT BOUNDARIES (09/2001) The boundaries of cutting units are designated as shown in the following table. The trees used for boundary designation are not to be cut. See Cutting Unit Boundary Designation Table Sale Name: Xxxx Page 142 Contract 2400-6,(6/06) C2.301# - CUTTING UNIT BOUNDARIES. (09/2001) Cutting Unit Boundary Designation Table Cutting Unit Paint Color Designation All Orange Boundary trees are marked with one vertical stripe and two dots. A vertical stripe at least three inches wide and five feet long is placed on one side of the boundary trees facing into the harvest unit. One dot is placed on both sides of boundary trees parallel to the boundary. A xxxxx xxxx is painted on the downhill side of boundary trees. Sale Name: Xxxx Page 143 Contract 2400-6 (6/06) C2.357# - INDIVIDUAL TREES (CUT TREE MARKING) (04/2004) Notwithstanding B2.35, in units shown as ITM on the Sale Area Map, individual trees are designated for cutting only if marked above and below xxxxx height as shown in the table below: See Cut Tree Marking Table Sale Name: Xxxx Page 144 Contract 2400-6,(6/06) C2.357# - INDIVIDUAL TREES (CUT TREE MARKING). (09/2001) Cut Tree Marking Table Cutting Unit Paint Color 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 41 Blue Sale Name: Xxxx Page 145 Contract 2400-6 (6/06) C3.34 - EMERGENCY RATE REDETERMINATION (06/2022) Forest Service shall redetermine rates for each species if, upon Purchaser's application, Forest Service determines that, because of changes in the timber market since the award date or the last rate redetermination under this provision, the Producer Price Index identified in A20 has declined by 25 percent or more. Rates shall be redetermined under B3.3 and for species where the rates declined, shall be considered established under B3.1 for timber Scaled after Purchaser's application. Increases in species rates will not be considered. This provision shall not apply during the period of a Contract Term Extension.
DIVISION C. Special Provisions In accordance with A21, the Sections, Subsections, and Items therein listed are attached and made a part hereof. The material is indexed by the numbering system used in Division B. The numbers after the C (that identifies material in this Division) indicates the Part, Section, Subsection, or Item of Division B that is being supplemented or modified by each particular provision included in this Division. C2.2# - UTILIZATION AND REMOVAL OF INCLUDED PRODUCTS (3/21). Unless otherwise agreed in writing, or as specified in C2.211# - Optional Removal of Non-sawtimber Products, Purchaser is required to pay for and remove the following products described in this provision and listed in A2 of the contract: Sawtimber is defined as:
DIVISION C. Special Provisions In accordance with A22, the Sections, Subsections, and Items therein listed are attached and made a part hereof. The material is indexed by the numbering system used in Division B. The numbers after the C (that identifies material in this Division) indicates the Part, Section, Subsection, or Item of Division B that is being supplemented or modified by each particular provision included in this Division. TRAFFIC CONTROL PLAN AND SPECIFICATIONS PURSUANT TO B(T)6.33 SAFETY Unless otherwise agreed in writing in accordance with B(T)6.33 Safety, the following measures are required to provide adequate warning of hazards for users of roads and trails adjacent to Purchaser's Operations. Part I. Signing and Other Warning Methods:
DIVISION C. Special Provisions In accordance with A21, the Sections, Subsections, and Items therein listed are attached and made a part hereof. The material is indexed by the numbering system used in Division B. The numbers after the C (that identifies material in this Division) indicates the Part, Section, Subsection, or Item of Division B that is being supplemented or modified by each particular provision included in this Division. Lost Mule SBA Timber Sale A22- List of Special Provisions C2.2# - UTILIZATION AND REMOVAL OF INCLUDED PRODUCTS (3/21). C2.358# – INDIVIDUAL TREES (LEAVE TREE MARKING) (7/20). C2.359# – INDIVIDUAL TREES (CUT TREE MARKING) (7/20). C3.34 – EMERGENCY RATE REDETERMINATION (6/22). C4.211 – DOWNPAYMENT (7/22). C4.212 – TEMPORARY REDUCTION OF DOWNPAYMENT (8/09). C4.213 – PERIODIC PAYMENT SCHEDULE (7/22). C4.3 – PAYMENT GUARANTEED BY XXXX. (8/21). C4.31 – BLANKET BOND. (8/21). C4.4 – PAYMENTS NOT RECEIVED (8/12). C5.102# – CONSTRUCTION OF TEMPORARY ROADS (2/97). C5.12# – USE OF ROADS BY PURCHASER (6/99). C5.13# – ROAD COMPLETION DATE (4/04). C5.210 – STAKING ERRORS BY PURCHASER (10/04). C5.219# – ENGINEERING (10/04). C5.31# – ROAD MAINTENANCE REQUIREMENTS (7/01). SPECIFICATION T-101 SURFACE BLADING SPECIFICATION T-103 DUST ABATEMENT SPECIFICATION T-108 SLIDE REMOVAL AND SLUMP REPAIR SPECIFICATION T-301 DITCH CLEANING SPECIFICATION T-310 MINOR DRAINAGE STRUCTURES SPECIFICATION T-507 CUTTING ROADSIDE VEGETATION SPECIFICATION T-618 MAJOR DRAINAGE STRUCTURES SPECIFICATION T-619 MISCELLANEOUS STRUCTURES SPECIFICATION T-710 TRAFFIC SERVICES C5.314# – DUST ABATEMENT TREATMENT (2/02). C5.314# – ATTACHMENT (2/02). C5.316 – SNOW REMOVAL (4/13). C5.32# – ROAD MAINTENANCE DEPOSIT SCHEDULE (8/12). C5.41# – CLOSURE TO USE BY OTHERS (3/07). C6.10 – PREWORK CONFERENCE (10/04).
DIVISION C. Special Provisions In accordance with A21, the Sections, Subsections, and Items therein listed are attached and made a part hereof. The material is indexed by the numbering system used in Division B. The numbers after the C (that identifies material in this Division) indicates the Part, Section, Subsection, or Item of Division B that is being supplemented or modified by each particular provision included in this Division. C2.30# - CUTTING UNIT BOUNDARIES (02/2021) Notwithstanding B2.3, the boundaries of cutting units, or portions of cutting units, are identified as shown on the Cutting Unit Boundary Designation Table below and the Sale Area Map. See Cutting Unit Boundary Designation Table. Marked boundary trees shall not be cut. Discernable Boundaries are boundary locations that are readily identifiable features on the ground in locations shown on the Sale Area Map. A Geo-Fence is a location on the ground corresponding to the boundary location shown on a mobile mapping device using a Global Positioning System (GPS) Receiver using the digital vector file/shapefile named N/A and dated N/A . The digital vector file/shapefile will be provided to the Purchaser by the Forest Service. A digital list of the coordinates can be provided upon request. Included Timber is located within and not past the boundary as shown on the mobile mapping device using the digital vector file/shapefile listed above. Purchaser is responsible for obtaining a GPS receiver(s) that is capable of determining the location of the true Geo-Fence within the contract tolerance. Allowable contract tolerance is N/A feet. Forest Service inspection of cutting Included Timber to determine if cutting is within allowable contract tolerance, shall use the digital vector file/shapefile named and dated above using a GPS Receiver with a minimum, tested accuracy in a N/A canopy of N/A feet. National Technology Development Program GPS Receiver accuracy reports by GPS manufacturer and model are available at: xxxxx://xxx.xx.xxxx.xxx/database/gps/mtdcrept/accuracy/index.htm. Forest Service determination of boundary location will be final. As an operational convenience and subject to written agreement by the Forest Service, in advance of marking, Purchaser may mark Geo-Fence boundaries on the ground with Purchaser's non-tracer paint. Boundary trees shall not be identified with paint applied below xxxxx height. Purchaser shall bear all costs associated with painting used to visually identify boundaries. Forest ...
DIVISION C. Special Provisions In accordance with A21, the Sections, Subsections, and Items therein listed are attached and made a part hereof. The material is indexed by the numbering system used in Division B. The numbers after the C (that identifies material in this Division) indicates the Part, Section, Subsection, or Item of Division B that is being supplemented or modified by each particular provision included in this Division. C2.2# - UTILIZATION AND REMOVAL OF INCLUDED PRODUCTS (4/03). Unless otherwise agreed in writing, or as specified in C2.211# - Optional Removal of Non-sawtimber Products, Purchaser is required to pay for and remove the following products described in A2 of the contract: Sawtimber is the xxxxx of trees meeting Sawtimber Product specifications as listed in A2 of the contract. Non-sawtimber is the xxxxx of trees meeting Non-sawtimber Product specifications as listed in A2 of the contract, but that do not meet the minimum piece specifications for Sawtimber Products, see table below. Non-sawtimber removal is only required in Cutting Units, 1, subject to C2.211#. Only the volume of non-sawtimber in the cutting units listed above is included in the estimated volume shown in A2. If the purchaser and the Forest Service agree to remove non- sawtimber from cutting units other than those listed above this non-sawtimber must be measured and paid for at the rates shown in A4. Product Species DBH Length DIB Merch. Factor Nonsaw (includes topwood from sawtimber) All 6.9 16 4.0 50% pulpable C2.211# -OPTIONAL REMOVAL OF NON-SAWTIMBER PRODUCTS (01/07). Purchaser shall fall all trees designated for cutting. Notwithstanding the requirements of B2.2, within cutting units 1, all Non-sawtimber Products meeting utilization standards in A2 shall either be decked at the landing or removed, at the option of the Purchaser. Unless otherwise agreed, if Purchaser elects the decking option, the Non-sawtimber Products shall be limbed and decked in such a manner as to facilitate loading at a later date. Payment for this product shall be made as per C4.225. If Purchaser elects to remove this product, then payment shall be made after the product is presented for scaling. If the Purchaser requests, and the Forest Service agrees, Non-sawtimber Products may be left in the harvest area in lieu of decking at the landing. C2.38# - SPECIES DESIGNATION (04/01/2020). Within the cutting units shown below, listed species are designated for cutting when they (a) meet utilization standard...
