Designs etc Sample Clauses

Designs etc. The Promoter/Transferor shall construct the Bungalow in accordance with the plans and designs approved by the authorities concerned and as per the specifications and particulars of construction contained in Schedule 11. The Allottee/Transferee has seen and inspected the site, Sanctioned Plans and the specifications of the Bungalow and accepted the Payment Schedule, floor plans, layout plans annexed along with this Agreement which has been approved by the competent authority. The Promoter/Transferor shall develop the Project in accordance with the said Sanctioned Plans and specifications. Subject to the terms in this Agreement, the Promoter/Transferor undertakes to strictly abide by such plans approved by the competent Authorities and shall also strictly abide by the bye-laws, FAR and density norms and provisions prescribed by the Applicable Laws and shall not have an option to make any variation in such plans, other than in the manner provided under the Applicable Laws, and breach of this term by the Promoter/Transferor shall constitute a material breach of the Agreement.
Sample 1Sample 2Sample 3See All (5)
AutoNDA by SimpleDocs
Designs etc. The Promoter shall construct the Apartment in accordance with the plans and designs approved by the authorities concerned and as per the specifications and particulars of construction contained in Schedule 16. The Allottee has seen and inspected the site, Sanctioned Plans and the specifications of the Apartment and accepted the Payment Schedule, floor plans, layout plans annexed along with this Agreement which has been approved by the competent authority. The Promoter shall develop the Project in accordance with the said Sanctioned Plans and specifications. Subject to the terms in this Agreement, the Promoter undertakes to strictly abide by such plans approved by the competent Authorities and shall also strictly abide by the bye- laws, FAR and density norms and provisions prescribed by the Applicable Laws and shall not have an option to make any variation in such plans, other than in the manner provided under the Applicable Laws, and breach of this term by the Promoter shall constitute a material breach of the Agreement.
Sample 1
Designs etc. 7.1 Where the goods are supplied by the Seller in accordance with the Buyer’s instructions, specifications or drawings, the Buyer shall indemnify the Seller against all costs, claims, damages and expenses to which the Seller may become liable as a result of the infringement or the alleged infringement of any patent, registered design or any other intellectual property right.
Sample 1
Designs etc. (a) Upon completion or cancellation of this order, Seller shall return all designs, drawings, and blueprints (Artwork) that are furnished by the City for the production of the goods. Artwork shall not be used by the Seller in the production of materials for any third party without express written consent of the City. Artwork involves valuable property rights of City and shall be held confidential by Seller. (b) Unless otherwise agreed herein, at its own cost Seller shall supply all materials, equipment, tools and facilities to perform the work described herein. Any materials, equipment, tools, artwork, designs, or other properties furnished by City or specifically paid for by City shall be City’s property. Any such property shall be used only in filling orders from City and may on demand be removed by City without charge. Seller shall use such property at its own risk and shall be responsible for all loss of or damage to the same while in Seller’s custody. Seller shall at its cost store and maintain all such property in good condition and repair. City makes no warranties of any nature with respect to any property it may furnish to Seller hereunder.
Sample 1
Designs etc. All designs and other intellectual property embodied in XXXX’x products or in any drawings or other documents provided by XXXX pursuant to this Contract shall remain the exclusive property of XXXX and shall be maintained in strict confidence by Buyer, but Buyer is hereby granted a non-exclusive license to use the same solely to install, maintain, operate and repair the XXXX products purchased pursuant to this Contract.
Sample 1

Related to Designs etc

  • Models The Purchaser acknowledges that the model homes, if any, are for display purposes only, and that some or all of the features contained therein may not be included in the Dwelling unless same is specifically provided for in any schedule forming part of this Agreement. The Purchaser acknowledges and accepts that the Vendor will be maintaining the model home or homes or sales offices and all advertising signs associated therewith for sale purposes until all homes in this subdivision and/or the adjacent subdivisions built by the Vendor or its affiliated corporations have been constructed, sold and occupied. The Purchaser acknowledges that the lot dimensions illustrated on the proposed plan of subdivision (if not registered) are approximate and may be varied in accordance with the requirements of the Vendor or the Municipality. The Purchaser further acknowledges that the lot dimensions illustrated on various plans, brochures or other marketing materials displayed in the sales office or elsewhere are approximate and it is suggested that the Purchaser refer to the actual dimensions of the subject lot as noted on the proposed plan of subdivision subject to the foregoing. The Purchaser acknowledges that if the Property being purchased herein has been used by the Vendor as a model home or inventory to the Vendor, then there will be wear and tear in the Property which the Purchaser accepts and the Purchaser acknowledges that he/she is purchasing this Property on an “as is” basis including without limiting the generality thereof existing nicks, dents, scratches, scuff marks on all hardwood areas, stairs, pickets, xxxxxxxx, risers, treads, all trim work doors, jambs, baseboards/casings, wear and tear on carpet, existing paint touch-up blemishes, existing chips and scratches on ceramics and grout areas, wear and tear and scuff marks on all counters and tubs and agrees that the Vendor shall not be responsible either directly or indirectly (including by way of claim pursuant to the legislation relating to the Tarion warranties) to clean, repair or replace any part of the Property including wall covering, carpeting, vinyl/ceramic/hardwood flooring, cabinetry, window treatments, trees, shrubs or other planting materials, interlocking walkways and/or slab walkways, or any other features or extras on the Property either before or after closing unless specifically set out in this Agreement of Purchase and Sale. The Purchaser acknowledges that the life time line of the exterior brick work, shingles, windows and doors seals commenced at the time the model home was built and the Builder’s warranties have expired and the Builder’s warranties on the air conditioner and humidifier ( Mechanical Units) have expired and agrees that the Vendor shall not be responsible either directly or indirectly (including by way of claim pursuant to the legislation relating to the Tarion warranties) for any warranty claim for same. All appliances, including but not limited to the air conditioner and humidifiers (Mechanical Units), and fixtures included in the purchase price are purchased in an “as is” condition.

  • LIMITATIONS ON REVERSE ENGINEERING, DECOMPILATION AND DISASSEMBLY You may not reverse engineer, decompile, or disassemble the Software, except and only to the extent that such activity is expressly permitted by applicable law notwithstanding this limitation.

  • Return of Materials Pertaining to Work Product Upon the request of Customer, but in any event upon termination or expiration of this Contract or a Statement of Work, Vendor shall surrender to Customer all documents and things pertaining to the Work Product, including but not limited to drafts, memoranda, notes, records, drawings, manuals, computer software, reports, data, and all other documents or materials (and copies of same) generated or developed by Vendor or furnished by Customer to Vendor, including all materials embodying the Work Product, any Customer confidential information, or Intellectual Property Rights in such Work Product, regardless of whether complete or incomplete. This section is intended to apply to all Work Product as well as to all documents and things furnished to Vendor by Customer or by anyone else that pertain to the Work Product.

  • Application of Funding Techniques to Programs 6.3.1 The State shall apply the following funding techniques when requesting Federal funds for the component cash flows of the programs listed in sections 4.2 and 4.3 of this Agreement.

  • Drawings Submitted During the Contract Term Where required to develop maintain and deliver diagrams or other technical schematics regarding the scope of work, Contractor shall do so on an ongoing basis at no additional charge, and must, as a condition of payment, update drawings and plans during the Contract term to reflect additions, alterations, and deletions. Such drawings and diagrams shall be delivered to the Authorized User’s representative.

  • Schematic Design Phase INDICATE IN STATEMENT OF WORK “NOT APPLICABLE” IF SECTION IS NOT APPLICABLE

  • Physical Architecture 59.2.1 CenturyLink's network architecture in any given local exchange area and/or LATA can vary markedly from another local exchange area/LATA. Using one or more of the NIMs herein, the Parties will agree to a physical architecture plan for a specific LATA, or if appropriate based on other requirements in Section 59, Local Calling Area. The physical architecture plan, as described in the Local Interconnection POI Profile, will be discussed during joint implementation planning. CLEC and CenturyLink agree to Interconnect their networks through existing and/or new Interconnection Facilities between CLEC switch(es) and CenturyLink's End Office Switch(es) and/or Tandem Switch(es). The physical architecture plan will be in accordance with Forecasting and Planning requirements in Article IV.

  • Promotional Examinations All promotional examinations shall be competitive and shall be conducted in the same manner as open examinations except that admission to a promotional examination shall be restricted to persons in the employ of the County who have served at least six months following regular appointment to the classified service and who meet the published requirements for the examination. The Commission shall determine whether an examination shall be held on a promotional or open basis. 1492 Disposition of Papers and Records Prescribed application forms of persons who fail to appear for the written test and examination records of candidates who fail to qualify in the written test shall be destroyed at any time after thirty days from the date of promulgation of the eligible list. Examination records of candidates who qualify in an examination shall be retained during the life of the eligible list or for 15 months, whichever is longer, and the examination records of each appointee shall be filed in his/her permanent personnel folder. Following the period during which competitors may inspect their examination papers, and after their ratings in each part of the examination have been transferred to examination records, examination materials such as question booklets, answer sheets and work papers may be destroyed, but general qualification appraisal sheets and applications shall be retained at least 15 months from the date of the promulgation of the eligible list. APPOINTMENT

  • Schematic Design See Section 2, Part 1, Article 2.1.4, Paragraph 2.1.4.2.

  • Distribution of UDP and TCP queries DNS probes will send UDP or TCP “DNS test” approximating the distribution of these queries.

Time is Money Join Law Insider Premium to draft better contracts faster.