Design Considerations a. All Rooftop Equipment shall be properly screened from view for aesthetic reasons, and must not be visible from street level.
Design Considerations. The design for the Project undertaken and performed by the Project Company shall:
Design Considerations. Designers must consider interior design compatibility with the local environment, functional requirements, ergonomics, and economy of construction, energy conservation, interior details, sustainable design and life cycle costs. Additionally, facilities must be designed in harmony with the architectural character of existing facilities that are to remain, especially those that are considered historically or architecturally significant. Design excellence must not add to project costs but balance the functionality, aesthetics, quality, sustainability and maintainability of facilities. Designs must comply with each installation design guide. Functional Design: Facility designs will be governed by the functional requirements of the project, will conform to the appropriate criteria and standards, and will be consistent with applicable funding limitations. Provide facilities and furnishings that achieve optimum life‐cycle savings. Conduct comparisons as needed to determine the most life‐cycle cost effective, materials, finishes, methods of construction, furnishings and services. Design for Flexibility: Flexibility in architectural and interior design facilitates the accommodation of changing functional requirements while conserving resources. The District may own or lease a facility from its time of construction until the end of its useful life. During this long tenure of use, functional requirements of buildings will change, often drastically. For this reason, flexibility is a significant design requirement for buildings, except for those with highly specialized functions where adaptive reuse would be cost prohibitive. Cost Engineering: Cost Engineering (CE) will be an integral part of the design process. Apply the CE principles and practices in the pre‐design and programming development stage relative to establishing costs. Initiate more CE costs relative to the scope and requirements at the concept design on program documents and use throughout the design and construction of projects.
Design Considerations. 10.5.1 The Parties must take into account the following design considerations during the Detailed Site Design process:
Design Considerations a. Establishment’s theme/cuisines/experience.
Design Considerations. Once Conceptual Plans are approved, Concessionaire may move forward with the design for the Concession Space. The design shall include all tenant finish requirements including but not limited to lighting, power, plumbing, HVAC distribution from main air supply, HVAC controls for the tie in to the base building system, supplemental HVAC if needed, life safety systems, interior finishes, all furnishings, fixtures, trade fixtures, equipment, and signage necessary to operate in a first-class manner. Special attention must be given to the design of the HVAC and electrical systems. For a concept that creates odors, the mechanical system must be designed or configured to prevent the transmission of said odors to other portions of the Concourses or the Terminal. All plans and specifications, materials and color selections are subject to review and approval by the Manager’s authorized representative.
Design Considerations. The Additional Equipment shall be properly screened from view for aesthetic reasons, and must not be visible from street level. Tenant, at Tenant's sole cost and expense, shall install and maintain such fencing and other protective equipment and/or visual screening on or about the Additional Equipment as Landlord may reasonably determine. The Additional Equipment shall be clearly marked to show the name, address, telephone number of the person to contact in case of emergency.
Design Considerations. The design of the Habitat Project Work to the 60% level was performed by the Contractor as a subcontractor to the Project Company under the Project Agreement prior to the Contract Date. The Parties do not expect the Habitat Project Work’s design to be materially advanced during this Agreement’s Preliminary Services Period. The Contractor represents that the design of the Habitat Project Work developed by the Contractor prior to the Contract Date pursuant to the Project Agreement was undertaken by a design team exercising such degree of care, skill and diligence as would reasonably be expected from consultants qualified to perform services similar in scope, nature and complexity to the design and by a Contractor appointed design team that:
Design Considerations a) Steel components shall be designed to be accessible for the purposes of applying, inspecting and maintaining the protective lining system.
Design Considerations. The Contractor shall adhere to the design outlined in the Customer Requirements document, notably: • The Development shall be compliant with the necessary standards outlined in BS8300, and Changing Places: A Practical Guide. (This document can be found on the Changing Places website xxxxx://xxx.xxxxxxxx-xxxxxx.xxx/) and registerable under the Changing Places scheme on the national website. It is a contractual requirement that the Changing Places toilet complies in full with these two documents. • The Contractor will provide any drawings required by external authorities or its own requirements as part of the supply process and provide a copy of same to the Council as part of the O&M manual mentioned later. • The Contractor is responsible for liaison with external authorities, e.g. Yorkshire Water Drains as part of the supply process. • The Contractor will apply for Building Control authority, manage and pay for that process within the contract terms. • The Contractor will apply for any changes or amendment to the Planning Permission authority, manage and pay for that process within the contract terms. • The Contractor shall be responsible for any and all project management considered necessary to complete the contract. • The Contractor is free to offer standard contract terms such as a JCT contract as part of their tender submission. The type of contract should be made clear at the time of tender submission. • The Contractor shall produce a project delivery programme indicating a proposed start on site date and all key steps up to and including practical completion and a draft programme shall be submitted as part of the tender. • The minimum physical internal size of the Changing Places toilet will be 4m long x 3m wide with a minimum 2.4m internal height. • Access will be gained through an external door which opens outwards on the front of the building (Main Street façade). Access will be level or a very slight slope dependent upon topography when the building is constructed. The facility will normally be available 9am to 6pm 7 days a week as the other toilets are. The facility will be accessible by using a RADAR key access system and a numeric keypad to allow out of hours access. The door shall also be fitted with a standard lock for additional security purposes. • Floor drainage will run to a single, central low point within the room and connect to the local town’s drainage system. • A drainage plan is attached and the contractor will be responsible for r...
