Design and Construction Standards. (a) All design and construction performed for the Adjustment work which is the subject of this Agreement shall comply with and conform to the following:
Design and Construction Standards. NYSDOT shall design and construct the Betterment, or cause it to be designed and constructed, in accordance with NYSDOT standards, and specifications under the supervision of a professional engineer licensed in this State.
Design and Construction Standards. The Facilities shall be designed and constructed to comply with all applicable federal, state and local laws and regulations in effect at the time of the Authority’s issuance of the Beneficial Use determination for the Facilities, (the “Construction Standards”). Beneficial Use determination shall be defined as the determination by the Loudoun Water inspector that the Facilities are ready for use and services can be connected to the main. Unless exempted by the applicable regulatory entity as part of a regulatory change, the Developer is responsible for ensuring the Facilities comply with the Construction Standards at the time of the Authority’s issuance of the Beneficial Use determination for the Facilities even if the Construction Standards change after a permit for construction of the Facilities is issued by the Authority. The construction of the Facilities shall be subject to inspection and approval by the Authority based upon the approved plans, Authority permits and Construction Standards. The Developer shall design and construct the Facilities in accordance with the following, as any of the same are amended from time to time, a copy each of which is on file with the Authority and included herein by reference:
Design and Construction Standards. “Design and Construction Standards” means the edition of the City-adopted Design and Construction Standards for public works projects that is in effect when the Approved Drawings and Specifications are approved by the City for purposes of the bids and which is available in the City’s Department of Engineering and Capital Projects and on the City’s website.
Design and Construction Standards. A. A TO issued against this master IDIQ contract will specify design and construction standards applicable to site or agency specific facility requirements. At a minimum, all ECMs, work, equipment and materials required for ECM installation shall comply with the most recent issue of the design and construction standards indicated in the TO as applicable. The following list of standards is provided as a guideline for establishing these requirements. • American National Standards Institute (ANSI) • Code of Federal Regulations (CFR) - 29 CFR 1910, Occupational Safety and Health Standards - 10 CFR 435, Energy Conservation Voluntary Performance Standards for Commercial and Multi-Family High Rise Residential Buildings - 29 CFR 1926, Safety and Health Regulations for Construction • National Electric Code (NEC) • National Electrical Safety Code (NESC) • National Fire Protection Association (NFPA) Standards including, but not limited to, NFPA 101 - Life Safety Code • National Electrical Manufacturers Association (NEMA) • Underwriters Laboratory (UL) • Uniform Building Code (UBC) • Uniform Plumbing Code (UPC) • American Society of Heating, Refrigeration and Air-Conditioning Engineers (ASHRAE) - ASHRAE 62 - ASHRAE 90.1 • Army Corps of Engineers Safety Manual • National Historic Preservation Act, as applicable • Illuminating Engineering Society of North America (IESNA) • American Institute of Architects (AIA) Masterspec • Air-Conditioning and Refrigeration Institute (ARI) • Occupational Safety and Health Administration (OSHA) regulations • Other design standards required by the ordering agency
Design and Construction Standards. All Improvements and Additional Works performed under this Lease will be designed, constructed, completed and implemented in compliance with Exhibit “C” attached hereto, Applicable Legal Requirements and Applicable Standards. BREP will give Lessor prior Notice of the commencement of any Work relating to such Improvements or Additional Works. Prior to the commencement of such Work, the Lessor Services Period Representative(s) and BREP Services Period Representative(s) will meet to discuss the applicable Scope of Work and the specific manner in which such Work will be performed.
Design and Construction Standards. All design and construction of the Offered Improvements shall be in accordance with the latest edition of the Standard Specifications as of the date of this agreement for Public Works Construction (“Standard Specifications”), including any addenda, as adopted by the Participating Local Government and modified by the Special Technical Specifications (“STS”) as prepared by RTC and contained herein as part of Exhibit “E”. Additionally, all design and construction of Offered Improvements shall be in accordance with all policies of the RTC, including the latest version as of the date of this agreement of the following: Policy for the Street and Highway Program, RRIF CIP, and Traffic Noise Mitigation Policy Report, all incorporated herein as if fully set forth. In the case of conflicting standards, the conflict shall be brought to the immediate attention of the RTC RRIF Administrator who shall, in conjunction with the Local RRIF Administrator, resolve the discrepancy within five (5) working days.
Design and Construction Standards. All improvements constructed by Tenant within the Leased Premises shall be constructed in strict compliance with detailed plans and specifications approved by County. Tenant is responsible to review and comply with the Tenant Design Guidelines and Xxxx Xxxxx Airport Construction Standards. All construction shall conform to applicable building codes, rules, regulations and Airport’s architectural standards as contained in reference document “Architect-Engineer Guide OC Public Works” and reference document “Xxxx Xxxxx Airport Construction Standards” which can be provided by Airport upon request. All work shall be done in conformity with Airport approved plans, valid building and other necessary permits and shall be acceptable to County and the appropriate governmental entity inspecting such work. Tenant shall have the responsibility to obtain all required permits and to investigate and pay for any and all fees, including but not limited to Transportation Corridor Agency fees, if applicable, necessary for such construction. Airport Director's or designee’s approval shall not constitute a representation or warranty as to such conformity, which shall remain Tenant's responsibility. Tenant shall be responsible for filing Form 7460 for any construction and/or height of construction equipment with the FAA, if required.
Design and Construction Standards. In its design and construction work on the Premises, Concessionaire will fully comply with the standards and development guidelines identified in the Tenant Work Permit Handbook. City reserves the right to amend Tenant Work Permit Handbook during the Term. Concessionaire covenants to comply with Tenant Work Permit Handbook in effect as of the date of any construction it undertakes.
Design and Construction Standards. Design and construction standards for facilities constructed by the PUD under this agreement shall be required to conform to the then prevailing written specifications, codes, methods, and standards required by the PUD for construction in unincorporated areas to ensure that hookups conform to the PUD Sewer System requirements.
