Description of test Sample Clauses

Description of test. The hydrogen emission test (Figure 7.1 of the present annex) is conducted in order to determine hydrogen emissions during the charge procedures of the REESS with the charger. The test consists in the following steps:
AutoNDA by SimpleDocs
Description of test. The protective housing is placed horizontally in a device in such a way that it is possible to lock the attachment support adjusters firmly. In the direction of the largest dimension of the housing, the end closest to the point of attachment on the adjuster for the support shall be immobilized by a 15 mm-wide rigid stop covering the entire width of the housing. At the other end, a stop identical to the one described above is placed on the housing so that the specified test load can be applied to it (Figure 2). The end of the housing opposite to that where the force is exerted may be locked rather than held in position as shown in Figure 2. Figure 2 Example of rear-view mirror bending-test rig
Description of test. 7.4.1.1.1. Principle The rotation-inducing forces caused by projections on the helmet and friction against the outer surface of the helmet which occur when a helmeted headform is dropped vertically on to an inclined anvil are measured in the longitudinal axis of the anvil. The peak force and its integral with respect to time over the duration of the positive impulse are used as performance criteria.
Description of test. 7.4.2.1.1. Principle The rotation-inducing forces caused by projections on the helmets and friction against the outer surface of the helmets are assessed firstly by a shear impact on the projections using a shear edge against which the projections shall shear away, be detached, or permit the shear edge to slide past the projections. The friction is assessed by the displacement of a carriage abrading the outer surface of the helmet. The shear impact and abrading carriage displacement are generated by a drop weight device.
Description of test. For Public Comment
Description of test. This test is highly operator-dependent; therefore, the Model 72 must be operated in accordance to OPEX’s supplied Model 72 Operator’s Manual. The Acceptance Test will run exactly one (1) hour using the Purchasing Entity’s own mail, at which time the Acceptance Test will terminate. During the Acceptance Test, the following functions can be observed and/or performed on the Model 72 System:
Description of test. The evaporative emissions test (see Figure A7/1) is designed to determine hydrocarbon evaporative emissions as a consequence of diurnal temperatures fluctuation, hot soaks during parking, and urban driving. The test consists of these phases:
AutoNDA by SimpleDocs
Description of test. 2.1. The testing of OBD systems consists of the following phases:

Related to Description of test

  • Description of the Project THIS SHOULD BE NO MORE THAN A TWO PARAGRAPH DESCRIPTION THAT PROVIDES A BACKGROUND OF THE PROBLEM, AS WELL AS HOW THE CONTRACTOR INTENDS TO SOLVE THE PROBLEM. KEEP IN MIND THAT THE CONTRACT SHOULD “STAND ON ITS OWN,” I.E. ANYONE SHOULD BE ABLE TO PICK IT UP AND FIGURE OUT WHAT IS GOING ON.)

  • Description of the service 9.1.1 Internet banking service implies an ability for the client to manage and receive remotely the following services from the bank by means of using the special Internet-site of the bank xxxxx://xxx.xxxxxxxxxxxxxxx.xx:

  • DESCRIPTION OF PROJECT For the Company to be eligible to earn the Maximum Credit Amount, the Company will satisfy its obligations as reflected in the following representations, which the IEDC has relied upon:

  • Description of Projects Services

  • DESCRIPTION OF THE PROPERTY 13.1 The Property as referred to in the Proclamation of Sale shall be deemed to have been correctly and sufficiently described.

  • Description of Services (a) Services Provided on an Ongoing Basis, If Applicable.

  • DESCRIPTION OF PREMISES In consideration of the performance of all the covenants and conditions herein, as of the effective date of residence, the BSC does hereby undertake to provide room or room and board service to Member as described below. This Contract does not guarantee specific apartment complexes, apartments, houses, rooms, room sizes, or roommates, and the BSC reserves the right to reassign members within the BSC, at any time during the term hereof, in order to make the most effective use of available space, or for any other reason to further the harmony, effectiveness or other organizational goals that the Board of Directors may from time to time determine. As such, Member may have exclusive or non-exclusive rights to use the apartment/bedroom they are assigned (depending on whether or not they are assigned a roommate(s)) and non-exclusive rights to use the common areas of the unit to which they are assigned.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!