Deliverables/Methods Sample Clauses

Deliverables/Methods. Contractor will deliver to University . . .
AutoNDA by SimpleDocs
Deliverables/Methods. 1.6.1 Consultant will deliver Services to the University as required in Section 1.5. The deliverable for Project A shall consist of a Preliminary Feasibility Study and Strategic Plan that contains the results of the analysis and recommended next steps for successful implementation and prioritization of demonstration-scale renewable/sustainable energy projects at twelve (12) potential and feasible locations, consisting of two (2) locations for each technology listed in Section 1.2. The deliverable for Project B shall consist of a Preliminary Feasibility Study and Strategic Plan that contains the results of the analysis and recommended next steps for successful implementation and prioritization of clean and efficient energy systems capable of operation utilizing a multitude of conventional and renewable fuels at the Depot Campus.

Related to Deliverables/Methods

  • Deliverables Upon satisfactory completion of the work authorization, the Engineer shall submit the deliverables as specified in the executed work authorization to the State for review and acceptance.

  • Program Components Activities and services delivered under this Program Element align with Foundational Programs and Foundational Capabilities, as defined in Oregon’s Public Health Modernization Manual, (xxxx://xxx.xxxxxx.xxx/oha/PH/ABOUT/TASKFORCE/Documents/public_health_modernization_man ual.pdf) as well as with public health accountability outcome and process metrics (if applicable) as follows:

  • NETWORK INTERCONNECTION METHODS 64.1 This Section sets forth the terms and conditions for Network Interconnection Methods (NIMs) provided between CenturyLink and CLEC for the Interconnection Facilities established between the Parties’ networks. Additionally, this Section describes the physical architecture for the Interconnection of the Parties’ facilities and equipment required for the transmission and routing of Local Traffic, ISP-Bound Traffic, IntraLATA LEC Toll Traffic, VoIP-PSTN Traffic, Transit Traffic and Jointly Provided Switched Access Service Traffic.

  • Required hardware and software The minimum system requirements for using the DocuSign system may change over time. The current system requirements are found here: xxxxx://xxxxxxx.xxxxxxxx.xxx/guides/signer-guide- signing-system-requirements. Acknowledging your access and consent to receive and sign documents electronically To confirm to us that you can access this information electronically, which will be similar to other electronic notices and disclosures that we will provide to you, please confirm that you have read this ERSD, and (i) that you are able to print on paper or electronically save this ERSD for your future reference and access; or (ii) that you are able to email this ERSD to an email address where you will be able to print on paper or save it for your future reference and access. Further, if you consent to receiving notices and disclosures exclusively in electronic format as described herein, then select the check-box next to ‘I agree to use electronic records and signatures’ before clicking ‘CONTINUE’ within the DocuSign system. By selecting the check-box next to ‘I agree to use electronic records and signatures’, you confirm that: • You can access and read this Electronic Record and Signature Disclosure; and • You can print on paper this Electronic Record and Signature Disclosure, or save or send this Electronic Record and Disclosure to a location where you can print it, for future reference and access; and

  • Hardware and Software In order to use the Services, you must obtain and maintain, at your expense, compatible mobile hardware and software as specified by Credit Union from time to time. Credit Union is not responsible for any third party software you may need to use the Services. Any such software is accepted by you as is and is subject to the terms and conditions of the software agreement you enter into directly with the third party software provider at time of download and installation.

  • Software and Services Upon execution of this Contract, a notice of award for RFO DIR-SDD-TMP-232 shall be posted by DIR on the Electronic State Business Daily.

  • SERVICES & DELIVERABLES Seller agrees to perform the services ("Services") and/or provide the goods ("Goods", which term shall include goods provided as part of any Services), described in any PO, in accordance with the applicable PO and with this Agreement. Acceptance of a PO and this Agreement shall occur (i) within five (5) days of receipt by the Seller; or, (ii) upon shipment of Goods; or, (iii) upon commencement of a Service, (whichever is the earlier). Seller shall be bound by the provisions of this Agreement, including all provisions set forth on the face of any applicable PO, whether Seller acknowledges or otherwise signs this Agreement or the PO, unless Seller objects to such terms in writing within five (5) days of receiving the Agreement and/or the PO, prior to shipping Goods or prior to commencing Services. This writing does not constitute a firm offer and may be revoked at any time prior to acceptance. This Agreement may not be added to, modified, superseded, or otherwise altered, except by a writing signed by an authorized Apple representative and specifically stated to be an amendment of this Agreement. Any terms or conditions contained in any acknowledgment, invoice, or other communication of Seller which are inconsistent with the terms and conditions of this Agreement, are hereby rejected. To the extent that this Agreement might be treated as an acceptance of Seller's prior offer, such acceptance is expressly made on condition of assent by Seller to the terms hereof and shipment of the Goods or beginning performance of any Services by Seller shall constitute such acceptance. Apple hereby reserves the right to reschedule any delivery or cancel any PO issued at any time prior to shipment of the Goods or prior to commencement of any Services. Apple shall not be subject to any charges or other fees as a result of such cancellation.

  • Software Updates XXXXX agrees to keep current with software licensed from Skyward and will install new versions on a timeline approved by XXXXX governance. This timeline will be communicated by NWRDC to the Districts. School District Workstations Configuration requirements for devices and their software that school district personnel use to access WSIPC’s software modules can be found on our website: xxxxx://xxx.xxxxx.xxx/technology‐team/. State Reports XXXXX will provide, at no additional fee, all data reports required by the state that impact 50% or more of the school districts in the state. WSIPC and NWRDC will work with state agencies to gather requirements on the required data. WSIPC will inform NWRDC staff of any mandated changes to state reports and NWRDC will communicate the information to the District. Appendix B NWRDC FTE Fees Fiscal Only NWRDC Software Support Services XXXXX Software Licensing Total FTE Fee $13.63 $20.34 $33.97 $15.56 $13.08 $28.64 $24.52 $20.34 $44.86 Student Only Full Service

  • Hosting Services 13.1 If Supplier or its subcontractor, affiliate or any other person or entity providing products or services under the Contract Hosts Customer Data in connection with an Acquisition, the provisions of Appendix 1, attached hereto and incorporated herein, apply to such Acquisition.

  • Construction Methods No four course of brick-work, with three joints, shall exceed in height, when built, one inch more than the same bricks piles upon one another without mortar. The bricks are to be well soaked in water before use on works, in proper through so as to be thoroughly wet when layed. The Cessation of the bubbles through the water is an irldication of saturation being complete. For ensuring thorough soaking of the bricks every one or two bricklayers or more as necessary, shall be provided with tubs for use The wall of structures shall be carried up regularly in all cases 1` when the nature of the work will admit of it not leaving any part 915mm (3 feet) lower than another. Horizontal courses shalI be straight, level and even and faces of walls smooth and plumb. A straight edge and a plumb- xxx shall be used for constant checking during progress of the work. No brick-bats shall be permitted to be used except when necessary for obtaining the dimension of the different course or for obtaining the specified bond. All unfinished work must be raked back in course unless otherwise directed arid when new work is to be jointed to it the surface of unfinished work must be cleaned and wetted. The bricks shall be laid by placing sufficient mortar on the wall and forcing every brick into it in such a manner as to completely fill every joint with moratar whether at the bottom, side or end of the brick. The mortar to be used shall be that specified for the relevant schedule items and shall comply with the specification for the mortar specified. The bound used shall be English and shall be carried throughout the work. At all angles forming the junction of any two walls, the bricks shall, at each alternate course be carried into each of the respective walls, so as to thoroughly unite the work. V'Jhen the faces are to be plastered, the joints shall be well raked out before any plaster is laid on should the plaster from want of proper joint ranking detach and 7 fall off from the brick work, the contractor shall strip off the plaster bodily to the extent ordered by Superintending Engineer and shall re-do the work properly at his own expense. All requisite scaffolding shall be provided at the contractor's expense and shall be double i.e., must it have two sets of upright supports Care must be taken to ensure the safety of the work people and the contractor must comply with such instructions as the Superintending Engineer may issue to ensure such safety. The contractor will be entirely responsible for any damage or injuries to person or property resulting from ill-erected scaffolding, defective ladders, or otherwise arising out of his default in this respect. The brick work for the retaining wall shall proceed side by side with the depositing and compacting of earth between the retaining walls. At no time shall the brick-work be constructed more than 405mm (1'-4") above Y the compacted earth. In the retaining wall weep-holes shall be provided at suitable intervals as instructed during execution, with the inner surface of the weep-holed plastered 20mm (3/4") thick in cement mortar 1:4 crouched rock of grades in different layer shall be provided at the inner end of the weep-holes to prevent the choking of the weep-holes to have full drainage. No extra payment will be made for this and no deductions will be made for this in the brick-work.

Time is Money Join Law Insider Premium to draft better contracts faster.