Contractor Work Hours and Safety Standards Contractor shall ensure compliance with all safety and hourly requirements for employees, in accordance with federal, state, and County safety and health regulations and laws.
CONTRACT WORK HOURS AND SAFETY STANDARDS As per the Contract Work Hours and Safety Standards Act (40 U.S.C. 3701-3708), where applicable, all Customer Purchase Orders in excess of ,000 that involve the employment of mechanics or laborers must include a provision for compliance with 40 U.S.C. 3702 and 3704, as supplemented by Department of Labor regulations (29 CFR Part 5). Under 40 U.S.C. 3702 of the Act, each contractor must be required to compute the wages of every mechanic and laborer on the basis of a standard work week of 40 hours. Work in excess of the standard work week is permissible provided that the worker is compensated at a rate of not less than one and a half times the basic rate of pay for all hours worked in excess of 40 hours in the work week. The requirements of 40 U.S.C. 3704 are applicable to construction work and provide that no laborer or mechanic must be required to work in surroundings or under working conditions which are unsanitary, hazardous or dangerous. These requirements do not apply to the purchases of supplies or materials or articles ordinarily available on the open market, or contracts for transportation or transmission of intelligence.
Contract Work Hours and Safety Standards Act The following clauses apply to any Federal-aid construction contract in an amount in excess of $100,000 and subject to the overtime provisions of the Contract Work Hours and Safety Standards Act. These clauses shall be inserted in addition to the clauses required by 29 CFR 5.5(a) or 29 CFR 4.6. As used in this paragraph, the terms laborers and mechanics include watchmen and guards.
Technical Specification As enumerated in Special Conditions of Contract/Scope of Work/attached Drawing/ Details/Schedule of Rates.
Technical Specifications The Technical Specifications furnished on the CD are intended to establish the standards for quality, performance and technical requirements for all labor, workmanship, material, methods and equipment necessary to complete the Work. When specifications and drawings are provided or referenced by the County, these are to be considered part of the Scope of Work, and to be specifically documented in the Detailed Scope of Work. For convenience, the County supplied specifications, if any, and the Technical Specifications furnished on the CD.
Drug and Alcohol Testing – Safety-Sensitive Functions A. Employees required to have a Commercial Driver’s License (CDL) are subject to pre-employment, post-accident, random and reasonable suspicion testing in accordance with the U.S. Department of Transportation rules, Coast Guard Regulations (46 CFR Part 16) or the Federal Omnibus Transportation Employee Testing Act of 1991. The testing will be conducted in accordance with current Employer policy.
Billing Specifications 55.6.1 The Parties agree that billing requirements and outputs will be consistent with the Ordering & Billing Form (OBF) and also with Telcordia Technologies Billing Output Specifications (BOS).
DRUG AND ALCOHOL TESTING Employees may be tested for drugs and/or alcohol pursuant to the provisions of the Employer's Drug and Alcohol Testing Policy which is attached hereto and made a part of this Agreement as if more fully set forth herein.
ARTICLE HEALTH AND SAFETY The Employer and the Union agree that they mutually desire to maintain standards of safety and health in the Home, in order to prevent injury and illness and abide by the Occupational Health and Safety Act as amended from time to time. The Employer shall prepare a policy on resident handling and safe work practices within six (6) months of the date of Such policies will be reviewed by the Joint Health and Safety Committee. A joint management and employee health and safety committee shall be constituted, which shall identify potential dangers, recommend means of improving the health and safety programs and obtaining information from the Employer or other persons respecting the identification of hazards and standards elsewhere. The committee shall normally meet every three months or more frequently if the committee decides. Scheduled time spent in such meetings is to be considered time worked for which shall be paid by the Employer at his or her regular rate. Minutes shall be taken of all meetings and copies shall be sent to the Committee members. Minutes of the meetings shall be posted on the workplace health safety bulletin board. The employer shall provide the time from work with pay and all related tuition costs and expenses necessary to certify the worker representative. Where an inspector makes an inspection of the workplace under the powers conferred upon him or her under the Occupational Health and Safety Act, the employer shall afford a certified committee member representing workers the opportunity to accompany the inspector during his or her physical inspection of a workplace, or any part or parts Where a worker certified member is not and available, the Employer shall afford a worker health and safety representative if any, or a worker selected by a Union, because of knowledge, experience and training, to represent it, the opportunity to accompany the inspector during his or her physical inspection of a workplace, or any part or parts Two (2) representatives of the Joint Health and Safety Committee, one (1) from management and one (1) from the employees, shall make monthly inspections of the work place and shall report to the health and safety the results of their inspection. The members of the Committee who represent the workers shall designate a certified member or person who is properly trained to inspect the workplace. The employer shall provide the member with such information and assistance as the member may require for the purpose of carrying out an inspection of the workplace. In the event of accident or injury, such representatives shall be notified immediately and shall investigate and report as soon as possible to the committee and to the Employer on the nature and causes of the accident or injury. Furthermore, such representatives must be notified of the inspection of a government inspector and shall have the right to accompany him on his inspections. Scheduled time spent in all such activities shall be considered as time worked. The Joint Health and Safety Committee and the representatives thereof shall have access to Report Form required in and of the Act and the annual summary of data from the relating to the number of work accident fatalities, the number of lost workday cases, the number of lost workdays, the number of cases that required medical aid without lost workdays, the incidence of occupation injuries, and such other data as the may decide to disclose. It is understood and agreed that no will be provided to the Committee which is confidential. This information shall be a standing item recorded in the minutes of each meeting. The Union will use its best efforts to obtain the full co-operation of its membership in the compliance of all safety rules and practices. The Employer will use its best efforts to make all affected direct care employees aware of residents who have serious infectious diseases. The nature of the disease need not be disclosed. Employees will be made aware of special procedures required of them to deal with these circumstances. The parties agree that all employees are aware of the requirement to practice universal precautions in all circumstances.
Technical Standards Applicable to a Wind Generating Plant i. Low Voltage Ride-Through (LVRT) Capability A wind generating plant shall be able to remain online during voltage disturbances up to the time periods and associated voltage levels set forth in the standard below. The LVRT standard provides for a transition period standard and a post-transition period standard.
