Contract Plans. “Plans” are documents that show location, details, and dimensions of the work to be performed. On any of the contract Plans where a portion of the work is drawn out and the remainder is shown in outline, the parts drawn out shall apply to all other like portions of the work. “Shop Drawings” include drawings, diagrams, layouts, schematics, descriptive literature, illustrations, lists or tables, performance and test data, and similar materials furnished by Purchaser to explain in detail specific portions of the work required by the contract. Purchaser shall submit a minimum of five (5) sets of required Shop Drawings to Forest Service, three (3) sets of which will be retained by Forest Service. Shop Drawings shall not exceed 24 inches by 36 inches in size. Approval or rejection and date will be noted or stamped on each set. Unless agreed otherwise, Forest Service shall approve or reject the Shop Drawings within 10 days of submission. Such approval of the Shop Drawings shall not be construed as a complete check, but will indicate only that the general method of construction and detailing is satisfactory. If the Shop Drawings are rejected, Purchaser must make the noted revisions and resubmit the Shop Drawings. A change in the amount of construction work that exceeds construction tolerances specified in the specifications identified in A7 caused by a Forest Service error in construction staking shall be treated as a Design Change. When incompatible situations arise between Plans, specifications, and actual conditions on the ground, Purchaser shall make corrections pursuant to B5.253.
Contract Plans. “Plans” are docu- ments that show location, details, and dimensions of the work to be performed. On any of the contract Plans where a portion of the work is drawn out and the remain- der is shown in outline, the parts drawn out shall apply to all other like portions of the work. “Shop Drawings” include drawings, diagrams, lay- outs, schematics, descriptive literature, illustrations, lists or tables, performance and test data, and similar materials furnished by Contractor to explain in detail specific portions of the work required by the contract. Contractor shall submit a minimum of five (5) sets of re- quired Shop Drawings to Forest Service, three (3) sets of which will be retained by Forest Service. Shop Draw- ings shall not exceed 24 inches by 36 inches in size. Approval or rejection and date will be noted or stamped on each set. Unless agreed otherwise, Forest Service shall approve or reject the Shop Drawings within 10 days of submission. Such approval of the Shop Draw- ings shall not be construed as a complete check, but will indicate only that the general method of construction and detailing is satisfactory. If the Shop Drawings are rejected, Contractor must make the noted revisions and resubmit the Shop Drawings. A change in the amount of construction work that exceeds construction tolerances specified in the speci- fications identified in A7 caused by a Forest Service er- ror in construction staking shall be treated as a Design Change. When incompatible situations arise between Plans, specifications, and actual conditions on the ground, Contractor shall make corrections pursuant to B5.253.
Contract Plans. The official approved drawings or plans or exact reproductions thereof, which have been prepared and signed and sealed by an engineer on behalf of the County and shall be utilized by the Contractor, which show the location, character, dimensions and details of the Work to be done and which are considered as part of the Contract Documents, including, but not necessarily limited to those Contract Plans enumerated in Article 1.2.1
Contract Plans. The work shall conform to drawings prepared by CME. numbered and titled as follows: Drawing Set Title Bridge No. 03240 in Wolcott, Connecticut Route 69 over Mad River Drawing Description Test Pit Location Plan - Water
Contract Plans i. Design Consultant prepared drawings specifically for the Project;
Contract Plans. A publication addressing the Work required for an individual project. At the time of the call for Bids, the Contract Plans may include, but are not limited to, the following: a vicinity map, a summary of quantities, structure notes, signing information, traffic control plans, and detailed drawings; all for a specific individual project. At the time of the Contract execution date, the Contract Plans include any Addenda.
Contract Plans. The work shall conform to the Work Plan prepared by Xxxxxxx Companies. and attached for reference.
Contract Plans. The Consultants will prepare 100% plans, as well as an updated Opinion of Probable Construction Cost for each contract, incorporating any changes since the review of the 85% plans. Final project plans and specifications will include Traffic Control Plans which will provide for maintenance of vehicular traffic and reasonable access to driveways and Town roads during construction periods. The 100% plans will be signed and sealed by the Consultants’ licensed Professional Engineers and Land Surveyors, as appropriate.
Contract Plans. 2.1. Analysis and Plans production required for Roadway, Utilities, Drainage, Signing/Pavement Markings, and Lighting Signalization; per tasks 4 – Roadway Analysis, 5 – Roadway Plans, 6a – Drainage Analysis, 6b – Drainage Plans, 7 – Utilities, 8 – Permits, 19 – Signing and Marking Analysis, 20 – Signing and Marking Plans, and 24 – Lighting Plans, as indicated in Metric’s staff hour estimate forms.
Contract Plans. The work shall conform to the drawing prepared by Xxxxxxx Companies, LLC and numbered and titled as follows:
