Consumables and Spare Parts Sample Clauses

Consumables and Spare Parts. Client shall arrange and pay for the electricity delivered through the permanent and temporary plant electrical system, natural gas fuel, raw water, resins, chemicals, enzymes, yeast and feed stock specified in Appendix A, to be delivered to the Facility in order to enable Contractor to perform the Work in accordance with the terms of this Agreement. Client shall provide at its own expense, after initial charge by Contractor, desiccants, lubricants, and hydraulic fluids as necessary for Contractor to perform the Work. Client shall supply all operating spare parts in accordance with a list supplied by Contractor. (Contractor shall have the right to use Client’s operating spares provided that Contractor shall timely replace any such operating spare parts used to repair or replace failed equipment).
Sample 1Sample 2
AutoNDA by SimpleDocs
Consumables and Spare Parts. Indigo shall xxxx the packaging of OEM Consumables and OEM Spare Parts with HP-designated branding. In the event that HP's volume requirements of such HP-branded OEM Products does not justify the expense of such custom-branding, prices will be adjusted by prior agreement in writing.
Sample 1
Consumables and Spare Parts. 27.1 O&M Operator shall supply Consumables required from time to time for operation and maintenance of the Plant, which will be consumed during operation and maintenance of Plant and will then need to be replenished, starting from start of Operational Phase till expiry of the Term in accordance with the terms and conditions specified in this Contract and as set out in detail in the Technical Specifications.
Sample 1
Consumables and Spare Parts. 24.1 Contractor shall supply Consumables required from time to time for operation and maintenance of the Facility, which will be consumed during operation and maintenance of Facility and will then need to be replenished, starting from start of Term till expiry of the Term in accordance with the terms and conditions specified in this Contract and as set out in detail in the Technical Specifications. 24.2 The Contractor's obligations include procurement, packaging, supply and delivery of the Consumables in accordance with the terms and conditions of this Contract and in accordance with Prudent Utility Practice. The procurement and supply of the Consumables shall be in sequence, using due care and diligence and in timely manner so as to comply with Facility Management Plan & Procedure. 24.3 Contractor shall procure and ensure availability of Consumables ahead of start of the Term, but no later than 2 (two) weeks prior to the start of Term, which are required for uninterrupted, smooth and trouble free operation and maintenance of the Facility. 24.4 Contractor shall procure and supply all Consumables as per specification provided by OEM and preferably from source recommended by OEM (if any) and in each case approved by Owner. 24.5 Contractor shall prepare storage system for receiving all Spare Parts and Consumables and maintain their records in electronic form and in book form. Contractor shall take in its custody, store, and preserve all Spare Parts and tools & tackles available with Owner in accordance with the Prudent Utility Practices. 24.6 Contractor shall recommend list of Spare Parts to be procured for 1 (One) year trouble free operation and maintenance of the Facility based on review of list of Spare Parts available with the Owner and based on location of Facility and supply logistics to the Site. 24.7 Owner shall procure at its cost and provide to Contractor, Spare Parts required for uninterrupted, smooth and trouble free operation and maintenance of the Facility. Owner shall procure Spare Parts based on requisition for Spare Parts made by Contractor and/or AMC Contractor. Contractor shall be responsible for timely requisition of Spare Parts keeping in mind the purchase requisition approval time, purchase order processing time and lead time for manufacturing and delivery of the Spare Parts. In any event, the Contractor shall submit on a quarterly basis a report on the inventory list/status of the Spare Parts. Any emergency requirement of Spare Parts an...
Sample 1
Consumables and Spare Parts. Beginning on the Effective Date, the Operator shall have stocked at the Pelletizer Facility at least two (2) month’s supply of Consumables and the Spare Parts listed on Schedule
Sample 1
Consumables and Spare Parts. 4.15.1 All consumables necessary for the maintenance and operation of all Services at all buildings will be provided free of charge by BGS, however, the Contractor will be responsible for keeping BGS informed of the consumable and the stock levels required
Sample 1
Consumables and Spare Parts. 31.7.1 The DBO Contractor shall at all times during the Term keep and maintain on the Facility Lands a sufficient inventory of Consumables and spare parts, as may be necessary to ensure the continued, reliable and safe operation of the Facility in accordance with the terms and conditions of this Agreement.
Sample 1
AutoNDA by SimpleDocs
Consumables and Spare Parts. A. Customer acknowledges that, Maintenance Services (and the Maintenance Fee) do not include the replacement of consumables and disposable materials, such as resins, printing heads, tips, build sheets cleaning fluid, wiping cloths, gloves and other similar items (collectively, "Consumables"), which Consumables the Customer may purchase separately at Company’s then current rates B. Customer acknowledges that spare parts may be reconditioned parts. Company’s warranty obligations hereunder shall not apply to repair or replacement necessitated in whole or in part by catastrophe, fault or negligence of the Customer, improper or unauthorized use including without limitation, use of resins, or spare parts unauthorized by Company, installation, modification or repair other than by Company or its authorized technical representatives, removal of the Product from the original installation site, unusual stress, power failure, deviation from recommended maintenance procedures, or failure to maintain the prescribed conditions at the installation site or other failure to comply with the User Instructions.
Sample 1

Related to Consumables and Spare Parts

  • Spare Parts 14.1 As specified, the supplier may be required to provide any or all of the following materials, notifications, and information pertaining to spare parts manufactured or distributed by the supplier:

  • Spares Boeing will revise, as applicable, the customized Recommended Spares Parts List (RSPL) and Illustrated Parts Catalog (IPC).

  • Tooling Unless otherwise specified in this Agreement, all tooling and/or all other articles required for the performance hereof shall be furnished by Seller, maintained in good condition and replaced when necessary at Seller's expense. If NETAPP agrees to pay Seller for special tooling or other items either separately or as a stated part of the unit price of Goods purchased herein, title to same shall be and remain in NETAPP upon payment therefore.

  • Raw Materials Lonza shall procure all required Raw Materials as well as consumables other than those Raw Materials that are Customer Materials. Customer shall be responsible for payment for all consumables and Raw Materials ordered or irrevocably committed to be procured by Lonza hereunder. Upon cancellation of any Batch or termination of the Agreement, all unused Raw Materials shall be paid for by Customer within [***] days of invoice and at Customer’s option will either be (a) held by Lonza for future use for the production of Product, (b) delivered to Customer, or (c) disposed of by Lonza.

  • Capital Equipment Collaborator’s commitment, if any, to provide ICD with capital equipment to enable the research and development activities under the Research Plan appears in Appendix B. If Collaborator transfers to ICD the capital equipment or provides funds for ICD to purchase it, then ICD will own the equipment. If Collaborator loans capital equipment to ICD for use during the CRADA, Collaborator will be responsible for paying all costs and fees associated with the transport, installation, maintenance, repair, removal, or disposal of the equipment, and ICD will not be liable for any damage to the equipment.

  • Technical Specifications The Technical Specifications furnished on the CD are intended to establish the standards for quality, performance and technical requirements for all labor, workmanship, material, methods and equipment necessary to complete the Work. When specifications and drawings are provided or referenced by the County, these are to be considered part of the Scope of Work, and to be specifically documented in the Detailed Scope of Work. For convenience, the County supplied specifications, if any, and the Technical Specifications furnished on the CD.

  • Materials and Equipment ‌ Material means property that may be consumed or expended during performance, component parts of a higher assembly, or items that lose their individual identity through incorporation into an end item. Equipment means a tangible item that is functionally complete for its intended purpose, durable, nonexpendable, and needed for performance. Materials and Equipment shall be priced in accordance with the terms of the task order award, contract type, and applicable FAR and agency-specific regulatory supplements. Unless otherwise directed by task order terms and conditions, the Contractor may apply indirect costs to materials and equipment consistent with the Contractor’s usual accounting practices.

  • Plant The expression ‘Plant’ as used in the tender papers shall mean every temporary accessory necessary or considered necessary by the Engineer to execute, construct, complete and maintain the work and all altered, modified, substituted and additional works ordered in the time and the manner herein provided and all temporary materials and special and other articles and appliance of every sort kind and description whatsoever intended or used therefore.

  • Product Specifications The Company agrees that all Products sold to Xxxx hereunder shall conform to the respective specifications set forth on Schedule A or to such other specifications as are from time to time agreed upon by the Parties.

  • Hardware and Software Requirements In order to access and retain Disclosures electronically, you must satisfy the following computer hardware and software requirements: access to the Internet; an email account and related software capable of receiving email through the Internet; a web browser which is SSL-compliant and supports secure sessions, and hardware capable of running this software.

Time is Money Join Law Insider Premium to draft better contracts faster.