Consigned Components Sample Clauses

Consigned Components. 7.1 In the event that Nevro supplies certain Consigned Components to CCC, such Consigned Components shall be delivered to CCC in sufficient time and in sufficient quantities based on Purchase Orders and in accordance with this Agreement, including normal yield levels, to allow CCC to meet scheduled Shipment Dates for the applicable Products. All Consigned Components shall be in good condition and in good working order. Nevro assumes complete liability for the quality of all Consigned Components and CCC shall not be responsible for any Defects or deficiencies therein. CCC shall, upon receipt of the Consigned Components, perform all necessary inspections of the Consigned Components, in accordance with its standard procedures and shall notify Nevro in writing, not later than twenty (20) Days from the date of receipt of the Consigned Components, of any Defects found or of any discrepancy in quantities. CCC reserves the right, after receipt of the Consigned Components, to timely inform Nevro of additional Defects which may be discovered or revealed by further inspection by or through the manufacturing process that could not be discovered at incoming inspection by CCC.
Sample 1Sample 2Sample 3See All (6)
AutoNDA by SimpleDocs
Consigned Components. VOLCANO reserves the right to supply through consignment, at its discretion and upon EI’s consent, any Components to EI related to the production of Product. VOLCANO will retain all rights, title, interest, and obligation (including but not limited to, warranty related issues) in the Components furnished to EI as consigned inventory. VOLCANO will retain ownership of all such Consigned Components including during the time such Components are used by EI in the manufacturing of VOLCANO’s Products. EI will manufacture the Product using its normal manufacturing practices. EI will care for VOLCANO consigned materials in the same manner as it own materials. Each party shall bear the financial loss of its materials that are yielded, consumed, or damaged during the manufacturing process at EI. EI will provide VOLCANO with inventory reports on a monthly basis or as requested for all consigned materials.
Sample 1
Consigned Components. TB shall retain all right, title and interest in Components furnished by TB to Foxconn (the “Consigned Components”), including all Consigned Components in Foxconn’s inventory and all Consigned Components in-transit to, and in-process at, a Foxconn facility. Foxconn assumes liability for Consigned Components in its possession against any non-manufacturing loss or damage Foxconn shall submit an inventory reconciliation of all Consigned Components on a monthly basis to TB. Within [*****] following TB’s written request, Foxconn will return all Consigned Components to TB, or to any other location specified by TB, at TB’s cost.
Sample 1
Consigned Components. A. Upon request from Dovatron, Mylex may, at its election, consign components of Products to Dovatron. All consigned components will be delivered to Dovatron in a mutually agreed package type, and in sufficient time and in sufficient quantities to allow Dovatron to meet scheduled delivery dates for the applicable Products. All consigned components shall be in good condition. Mylex assumes complete liability for the quality of all consigned components and Dovatron shall not be responsible for any defects therein or failures thereof. Dovatron shall be responsible for inventory shrinkage of consigned components after its receipt of such components and for ensuring that appropriate physical controls of such components are in place and properly administered.
Sample 1
Consigned Components. 9.1 Upon notice to Seller, Buyer may supply certain consigned Components to Seller. Consigned Components shall be delivered to Seller in sufficient time and in sufficient quantities based on Purchase Orders and in accordance with this Agreement, including normal attrition levels, to allow Seller to meet scheduled Shipment Dates for the applicable Products. All consigned Components shall be in good condition and in good working order. Buyer assumes complete liability for the quality of all consigned Components and Seller shall not be responsible for any Defects or deficiencies therein. Seller shall, upon receipt of the consigned Components, perform reasonable level of inspections of the consigned Components, in accordance with its standard procedures and shall notify Buyer in writing, not later than ten (10) Days from the date of receipt of the consigned Components, of any Defects found or of any discrepancy in quantities. Seller reserves the right, after receipt of the consigned Components, to inform Buyer of additional Defects which may be discovered or revealed by further inspection by or through the manufacturing process that could not be discovered at Incoming Inspection by Seller.
Sample 1
Consigned Components. During the Term, in lieu of Supplier purchasing certain Components pursuant to Sections 2.6(a) and 2.6(b) Customer may notify Supplier in writing that Customer wishes to supply certain materials, parts and supplies directly to Supplier for incorporation into Products manufacture by Supplier (such directly supplied materials, parts and supplies, the “Consigned Components”). Customer shall be solely responsible for determining the required quantities of Consigned Components, and for all orders, payments and timing of delivery of such Consigned Components. Customer shall use commercially reasonable efforts to ensure that sufficient quantities of Consigned Components are delivered to Supplier in sufficient time to enable Supplier to meet its manufacturing and delivery obligations with respect to Products based on Purchase Orders and Binding Forecasts, provided that Supplier shall have no liability for any failure to deliver Products to Customer where such failure arises as a result of Customer’s failure to deliver Consigned Components to Supplier in a timely fashion or at all, or to provide Supplier with adequate quantities of Consigned Components. Customer assumes all liability for the quality of all Consigned Components, and Supplier shall not be responsible for any defects discovered therein, provided that Supplier shall carry out a reasonable inspection of such Consigned Components in accordance with Supplier’s standard operating procedures promptly upon delivery to Supplier. Supplier shall, within ten (10) days following receipt of any Consigned Components, notify Customer of any defects identified in such Consigned Components or any discrepancy in quantity [***] Certain information in this document has been omitted and filed separately with the Securities and Exchange Commission. Confidential treatment has been requested with respect to the omitted portions. delivered. Without limiting the foregoing, Supplier shall promptly inform Customer of any additional defects in the Consigned Components discovered or revealed by further inspection by or through the manufacturing process for Products that could not have been discovered at the time of delivery of such Consigned Components. Supplier will provide Customer with a written statement of Consigned Components used by Supplier at the end of each month.
Sample 1
Consigned Components. Agilent reserves the right to supply through consignment, at its discretion, any Components to Flextronics related to the production of Product, however such changes are subject to cost model adjustments, including but not limited to material handling fees, which need to be mutually agreed. Agilent will retain all rights, title, interest, and obligation (including but not limited to, warranty related issues) in the Components furnished to Flextronics as consigned inventory. Agilent will retain ownership of all such Consigned Components including during the time such Components are used by Flextronics in the manufacturing of Agilent's Products. Percentage limits on the Consigned Components will be mutually agreed upon by the parties in the Addendum.
Sample 1
AutoNDA by SimpleDocs
Consigned Components. In consideration of Seller’s agreement to accept Buyer’s consignment of components, if any, for use in the manufacture of goods, Buyer agrees that, notwithstanding anything else contained in this agreement or otherwise, Buyer bears the risk of loss of or damage to consigned components and shall release Seller from liability for loss to consigned components, including without limitation loss resulting from Seller’s negligence or yield loss, and further shall waive rights of subrogation against Seller in the event of such loss. At all times, Buyer shall hold title to consigned components. Buyer shall ship consigned components to Seller DDP (Incoterms 2010) Seller’s manufacturing facility. Defective, Faulty or Damaged Consigned Components. Seller shall return consigned components damaged at delivery, damaged through yield loss, defective or faulty, to Buyer ExWorks (Incoterms 2010) Seller’s manufacturing facility. The quantity of goods ordered shall be automatically reduced as necessary due to the return of said consigned components.
Sample 1

Related to Consigned Components

  • Product ACCEPTANCE Unless otherwise provided by mutual agreement of the Authorized User and the Contractor, Authorized User(s) shall have thirty (30) days from the date of delivery to accept hardware products and sixty (60) days from the date of delivery to accept all other Product. Where the Contractor is responsible for installation, acceptance shall be from completion of installation. Failure to provide notice of acceptance or rejection or a deficiency statement to the Contractor by the end of the period provided for under this clause constitutes acceptance by the Authorized User(s) as of the expiration of that period. The License Term shall be extended by the time periods allowed for trial use, testing and acceptance unless the Commissioner or Authorized User agrees to accept the Product at completion of trial use. Unless otherwise provided by mutual agreement of the Authorized User and the Contractor, Authorized User shall have the option to run testing on the Product prior to acceptance, such tests and data sets to be specified by User. Where using its own data or tests, Authorized User must have the tests or representative set of data available upon delivery. This demonstration will take the form of a documented installation test, capable of observation by the Authorized User, and shall be made part of the Contractor’s standard documentation. The test data shall remain accessible to the Authorized User after completion of the test. In the event that the documented installation test cannot be completed successfully within the specified acceptance period, and the Contractor or Product is responsible for the delay, Authorized User shall have the option to cancel the order in whole or in part, or to extend the testing period for an additional thirty (30) day increment. Authorized User shall notify Contractor of acceptance upon successful completion of the documented installation test. Such cancellation shall not give rise to any cause of action against the Authorized User for damages, loss of profits, expenses, or other remuneration of any kind. If the Authorized User elects to provide a deficiency statement specifying how the Product fails to meet the specifications within the testing period, Contractor shall have thirty (30) days to correct the deficiency, and the Authorized User shall have an additional sixty (60) days to evaluate the Product as provided herein. If the Product does not meet the specifications at the end of the extended testing period, Authorized User, upon prior written notice to Contractor, may then reject the Product and return all defective Product to Contractor, and Contractor shall refund any monies paid by the Authorized User to Contractor therefor. Costs and liabilities associated with a failure of the Product to perform in accordance with the functionality tests or product specifications during the acceptance period shall be borne fully by Contractor to the extent that said costs or liabilities shall not have been caused by negligent or willful acts or omissions of the Authorized User’s agents or employees. Said costs shall be limited to the amounts set forth in the Limitation of Liability Clause for any liability for costs incurred at the direction or recommendation of Contractor.

  • Raw Materials Lonza shall procure all required Raw Materials as well as consumables other than those Raw Materials that are Customer Materials. Customer shall be responsible for payment for all consumables and Raw Materials ordered or irrevocably committed to be procured by Lonza hereunder. Upon cancellation of any Batch or termination of the Agreement, all unused Raw Materials shall be paid for by Customer within [***] days of invoice and at Customer’s option will either be (a) held by Lonza for future use for the production of Product, (b) delivered to Customer, or (c) disposed of by Lonza.

  • Products Products available under this Contract are limited to Software, including Software as a Service, products and related products as specified in Appendix C, Pricing Index. Vendor may incorporate changes to their product offering; however, any changes must be within the scope of products awarded based on the posting described in Section 1.B above. Vendor may not add a manufacturer’s product line which was not included in the Vendor’s response to the solicitation described in Section 1.B above.

  • API If the Software offers integration capabilities via an API, your use of the API may be subject to additional costs or Sage specific policies and terms and conditions (which shall prevail in relation to your use of the API). You may not access or use the API in any way that could cause damage to us or the Software, or in contravention of any applicable laws. We reserve the right in our sole discretion, to: (i) update any API from time to time; (ii) place limitations around your use of any API; and (iii) deny you access to any API in the event of misuse by you or to otherwise protect our legitimate interests.

  • Product Recalls The Company is not aware of any pattern or series of claims against the Company or any of its subsidiaries which reasonably could be expected to result in a generalized product recall relating to products sold by the Company or any of its subsidiaries, regardless of whether such product recall is formal, informal, voluntary or involuntary.

  • Product Specifications The Company agrees that all Products sold to Xxxx hereunder shall conform to the respective specifications set forth on Schedule A or to such other specifications as are from time to time agreed upon by the Parties.

  • Materials and Equipment ‌ Material means property that may be consumed or expended during performance, component parts of a higher assembly, or items that lose their individual identity through incorporation into an end item. Equipment means a tangible item that is functionally complete for its intended purpose, durable, nonexpendable, and needed for performance. Materials and Equipment shall be priced in accordance with the terms of the task order award, contract type, and applicable FAR and agency-specific regulatory supplements. Unless otherwise directed by task order terms and conditions, the Contractor may apply indirect costs to materials and equipment consistent with the Contractor’s usual accounting practices.

  • Defective Products None of the Group Companies has manufactured, sold or supplied products which are, or were, in any material respect, faulty or defective, or which do not comply in any material respect with any representations or warranties expressly made by such Group Company, or with all applicable regulations, standards and requirements.

  • Product Recall (a) If a recall is required by applicable Law, or if Buyer or Supplier reasonably determines that a recall is advisable because the goods may create a potential safety hazard, are not in compliance with any applicable code, standard or legal requirement, or contain a defect or non-conformance with the requirements of this Order occurring or likely to occur in multiple goods, which such defects or non-conformances are substantially similar or have substantially similar causes or effects (collectively a “Serial Defect”), the parties shall promptly communicate such facts to each other. At Buyer’s request, Supplier shall promptly develop a corrective action plan satisfactory to Buyer, which shall include all actions required to recall and/or repair the goods and any actions required by applicable Law (“Corrective Action Plan”) for Buyer’s review and approval. At Buyer’s election, Xxxxx may develop the Corrective Action Plan. In no event shall Buyer and Supplier’s failure to agree on the Corrective Action Plan delay the timely notification of a potential safety hazard, non-compliance or Serial Defect to users of the goods, cause either party to be non-compliant with applicable Law or prevent Buyer from taking reasonable actions to prevent injury or damage to persons, equipment or other property. Supplier and Buyer shall cooperate with and assist each other in any corrective actions and/or filings, if applicable.

  • Components Patheon will purchase and test all Components (with the exception of Client-Supplied Components) at Patheon’s expense and as required by the Specifications.

Time is Money Join Law Insider Premium to draft better contracts faster.